cayn25

Oh that was when the brake was pressed

sssuperman82

and what retailer was that?....where can we get the LEDS from??...come on people we need complete info to DIOurselves

cayn25

In my previous post I said Peterson's made the LED assembly. I bought it from virgofleet.com but I do not know if it is the best price for the LEDs because I got it awhile back.

momo

Cayn25, how does the leds compare to the stock lighting? Is it brighter, not as bright, or what? You wouldn't happen have to have before and after pics, would ya? Please share if you do, thanks for the info.

cayn25

The LED's are brighter than stock lighting. Sorry no before and after.

zenmoused

So you replaced the whole incandescent housing with a plug and play led array? Seems like a relatively easy procedure, once you get that thing apart. Anything else huge I should know before I dissect my first housing?

cayn25

To be careful about the cut because the reverse housing is really close to brake light housing. If you don't have a compressor, you might want to hold it upside down while doing the cut or a lot of dust and debris will get inside the housing and it just looks bad. If you want me to post a pic of my first set where I also took out the red lense and you could see where I made my cuts.

RA-Eight

iTrader: (6)

Quote:

If you want me to post a pic of my first set where I also took out the red lense and you could see where I made my cuts.

Yes, please post.

cayn25

I found that they are brighter without the red lense but it just looks better with the lense intact and they are very bright even with the lense. Hope these help

sssuperman82

hey cayn25, do you have pics of them already with the led inside and the sealant , like the complete project...i just want to know how it looks finished...thanks