Notices
Series I Engine Tuning Forum EMS (Flash Tuning, Interceptor, Piggy Back, Stand Alone)

Stage 1 funkyness and info for all.

Thread Tools
 
Rate Thread
 
Old Mar 9, 2004 | 04:14 PM
  #126  
RX-8 friend's Avatar
Registered User
 
Joined: Jul 2003
Posts: 680
Likes: 0
From: Edmonton
Maurice left his in, in the "OFF" switch position. It didn't affect the reflash process. If you leave it "ON", their computer will detect a MAF problem.
Reply
Old Apr 6, 2004 | 02:05 AM
  #127  
canzoomer's Avatar
Forum Vendor
 
Joined: Jul 2003
Posts: 1,223
Likes: 1
From: Edmonton, Alberta
No, sorry, byut leaving it on does not show up on the diagnostics.
At the last re-flashI intentionally lef tit all on, and also had them run the engine and PCM diagnostics. No error codes showed up, and it went fine.

We have **FINALLY** finished retuning for L flash. WE did a fairly quick re-tune for safety a while back, but I was not completely happy with the results.
So, we held off shipping back any of the rebuilds and the new units for a couple of weeks, and worked on perfecting the tune to accomodate L more smoothly.
As of today I am **VERY** pleased to say it is done now.

So, we program and ship units as fo tomorrow.

Mazda did some really twisted stuff in L to save fuel and reduce flooding issues. Some of it really does work. However what it does NOT do is improve power. It actually costs power in the range of 5,100 to 6,500 rpm.

We have compensated for the L flash behaviours now.
Reply
Old Apr 6, 2004 | 07:32 AM
  #128  
Sea Ray's Avatar
Registered User
 
Joined: Nov 2003
Posts: 730
Likes: 0
From: Nicholasville, Ky
So for those of use with the first units for the L flash, should we arrange to send them back, or can we now download your new pgm using a cable?
Reply
Old Apr 6, 2004 | 08:05 AM
  #129  
WHealy's Avatar
Mr. Blue Man
 
Joined: Dec 2003
Posts: 887
Likes: 0
From: Carmel, IN
Originally posted by Sea Ray
So for those of use with the first units for the L flash, should we arrange to send them back, or can we now download your new pgm using a cable?
Sea Ray,

Certianly not the autority but ...

If you had one of the very early Stage I's you don't have the upgraded unit that woudl allow the data port connection. Don't know how early you got yours (lucky dog ) but I undertsand the cables are readily availble if you have the correct Stage I.

Hope that helps.
Reply
Old Apr 6, 2004 | 08:14 AM
  #130  
Sea Ray's Avatar
Registered User
 
Joined: Nov 2003
Posts: 730
Likes: 0
From: Nicholasville, Ky
Hi Whealy,

My unit is dated March 5th, ordered Dec 03, and it does have the port (USB ?) in the unit. I would like to be able to update it while still in the car which should be possible using a laptop I hope.

I don't have the cable but Maurice said ealier that he will sell them. And I assume the updates should be available on his web site or he could e-mail them to us.

Thanks
Reply
Old Apr 6, 2004 | 08:21 AM
  #131  
WHealy's Avatar
Mr. Blue Man
 
Joined: Dec 2003
Posts: 887
Likes: 0
From: Carmel, IN
Sea Ray,

Then yep i beleive you are set. Just get yout cables. Of course Maurice will again be busy with the updated Stage I shipping, but I assume he can get you the cables. Now he probably needs to setup a FTP site on his web site. Good thing Maurice is a computer guy too!

Good luck and let us know how it goes.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
theblinkof
Series I Trouble Shooting
33
Oct 4, 2023 05:24 PM
projectr13b
RX-8 Racing
20
May 14, 2016 06:25 PM
Evan Gray
Series I Trouble Shooting
4
Nov 24, 2015 01:00 AM
garryg
Australia/New Zealand Forum
2
Oct 1, 2015 04:54 PM
archon
RX-8 Parts For Sale/Wanted
3
Oct 1, 2015 06:08 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 04:02 AM.