DIY: Shift Boot Change
05-15-2008, 03:28 AM
#26
Registered User
iTrader: (1)
Join Date: Sep 2007
Location: Chino CA.
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
thanks i did this but the people gave me the wrong shift boot it was too small on the bottom it had some elastic band on it
looked nice though real all black leather
looked nice though real all black leather
05-19-2008, 04:28 PM
#27
Registered User
Join Date: Jan 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
it was like this but all black though
05-20-2008, 03:49 AM
#29
Registered User
Join Date: Jan 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
my finger is bleeding and bruised from trying to get it off for like 40 minutes
06-06-2008, 02:46 AM
#33
Vegas rx8!
Thread Starter
Join Date: Mar 2007
Location: Las Vegas
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
well mine just broke, and its not HUGE deal if it breaks, the dash does not come off easily when it breaks anyway. if you have to just try and pulling up on it to break the tab. after that first tab just gently pull up on the center console evenly and the other clips will just pop open. that first one is the hard clip. If you can't get it to open just let me know. ill try and be more specific.
06-28-2008, 07:16 PM
#34
Banned
Join Date: May 2007
Location: Green Side, yo!
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
for the last hour, i was trying to get that dreaded clip off on right side......no luck..my finger is hurting like crazy......lol......that damn clip....no matter how hard i push..it wouldn't come off at all...i don't really want to break it...so i guess....i'll just leave the shift boot alone for now........I put on the ebrake wrap...it's pretty neat...:D
06-29-2008, 04:15 PM
#36
Banned
Join Date: May 2007
Location: Green Side, yo!
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
It's all good. You've been pretty helpful with the DYI pics and everything...I've been thinking..maybe...if i take the console kit off on the right side...i could push the clip from the side.......i'm going to try it again today
07-16-2008, 01:30 PM
#37
LVNMYRX8
Join Date: Mar 2008
Location: Michigan
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered my new red leather shift boot today and cant wait to get it and put it on. It should be just what my red/black leather interior needs to spice things up to my liking. Thanks in advance shiftstyle. Hoke
08-04-2008, 10:58 PM
#38
i got the shift boot today and installed it tonight. its too dark to take pics right now but ill get to it eventually.
couple of problems i ran into:
1. the bastard clip near the parking brake that everyone has problems with gave me problems as well. i just pulled as hard as i possibly could and finally popped it off. it broke (still on there but broken on one side) but it doesnt affect anything anyways. the console still holds as well as ever. its a useless clip, dont worry about breaking it.
2. the ring that was superglued to the stock shift boot gave me the worst problem...when trying to take it off it broke into 6 pieces. so i had to individually pull off the 6 pieces of the plastic ring and puzzle them back together. i then superglued all the pieces together to form the circle again. I guess im good at puzzles cause it came out perfect in the end =D haha.
3. the tabs that you have to slide the shift boot onto were annoying but you just got to keep messing with them and turning the shift boot til it fits right. oh and be sure to keep looking onto the side that will be visible to make sure the stitching is centered and looks even on all four sides.
all in all it wasnt too difficult just took longer than i expected. thanks shiftstyle and thank you ivory8 for the excellent writeup!!!
couple of problems i ran into:
1. the bastard clip near the parking brake that everyone has problems with gave me problems as well. i just pulled as hard as i possibly could and finally popped it off. it broke (still on there but broken on one side) but it doesnt affect anything anyways. the console still holds as well as ever. its a useless clip, dont worry about breaking it.
2. the ring that was superglued to the stock shift boot gave me the worst problem...when trying to take it off it broke into 6 pieces. so i had to individually pull off the 6 pieces of the plastic ring and puzzle them back together. i then superglued all the pieces together to form the circle again. I guess im good at puzzles cause it came out perfect in the end =D haha.
3. the tabs that you have to slide the shift boot onto were annoying but you just got to keep messing with them and turning the shift boot til it fits right. oh and be sure to keep looking onto the side that will be visible to make sure the stitching is centered and looks even on all four sides.
all in all it wasnt too difficult just took longer than i expected. thanks shiftstyle and thank you ivory8 for the excellent writeup!!!
08-06-2008, 02:08 AM
#39
Registered User
iTrader: (1)
Join Date: Sep 2007
Location: Chino CA.
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
the only problem i have is where u slide the tabs in the ones that kinda go into where the ashh tray is it wont pop in and one more thing u guys gotta look out for is when changing to manual mode sometimes the boot gets caught and wont let u shift gears
07-10-2010, 11:37 AM
#42
Registered
Join Date: Sep 2003
Location: Northern Virginia
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
I did this today. The instructions were very good.
I had a few complications. The clip that is very easy to break broke about the second I touched it. But the panel goes right back on and nothing seems out of place.
The black plastic ring around the top of the boot was already broken into about 8 pieces. I used a twist tie instead and wrapped the tabs with a thin strip of electrical tape.
Looks terrific and it was actually easy!
I had a few complications. The clip that is very easy to break broke about the second I touched it. But the panel goes right back on and nothing seems out of place.
The black plastic ring around the top of the boot was already broken into about 8 pieces. I used a twist tie instead and wrapped the tabs with a thin strip of electrical tape.
Looks terrific and it was actually easy!
07-27-2010, 02:13 AM
#43
Registered User
Join Date: Jan 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Thank you all for the support.
Here's a discount code for 50% off all purchases on our site until July 31: RX8JULY
This is your chance to get a shift boot or armrest covers for half the price!!!
Please feel free to pass this discount code along.
Thank you again
Here's a discount code for 50% off all purchases on our site until July 31: RX8JULY
This is your chance to get a shift boot or armrest covers for half the price!!!
Please feel free to pass this discount code along.
Thank you again
07-27-2010, 03:41 AM
#45
I zoom therefore I am.
+1000 for shiftstyle. After placing my order I received an email stating that a special feature I ordered wasnt available and did i want a refund or to change my order. i emailed back expecting to get a response tomorrow but no, response was within a minute.
Not only did they correct my order but credited back my paypal for the difference. Excellent service!
Not only did they correct my order but credited back my paypal for the difference. Excellent service!
07-27-2010, 06:17 AM
#46
Registered User
Join Date: Oct 2009
Location: Eastern Europe
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Just ordered armrest's. mmmm.Couldnt work out the discount code, never mind,they look great in the pics.
Last edited by FastFreddy61; 07-27-2010 at 06:21 AM.
07-27-2010, 12:50 PM
#47
Registered User
Join Date: Jan 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
07-31-2010, 09:38 PM
#48
I zoom therefore I am.
and 4 days later the new boot is sitting on my desk waiting for tomorrow to install it. 4 days from order to arrival on a custom made boot... WOW!
08-02-2010, 04:39 PM
#49
Registered User
Join Date: Jan 2008
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts