Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

Temporary DE-tune

Thread Tools
 
Rate Thread
 
Old Jul 17, 2012 | 06:54 PM
  #1  
Renesis Noob's Avatar
Thread Starter
Registered
 
Joined: Jun 2012
Posts: 42
Likes: 0
From: Corpus Christi TX
Temporary DE-tune

Hi all, I have recently purchased an 04 Six speed. It came with a Greddy turbo kit (which of course was why I made the deal). However the more research I do on this forum the more I've come to realize that all the previous owner did was by the kit and slap it in as it came out of the box. So no AFR, turbo timer....etc. with the exception of a boost gauge. So I am wondering to all of you super tuners out there, would I be able to disconnect power to the emange (if i could ever find the M@#$# F%#@#er) and remove the compressor pipe from the TB and just run a hose from the TB to the MAF if the car would just act NA again until I'm able to afford to buy the parts needed to make the car run proper with the turbo installed?
Reply
Old Jul 17, 2012 | 07:04 PM
  #2  
wcs's Avatar
wcs
no agenda
iTrader: (2)
 
Joined: Feb 2005
Posts: 5,210
Likes: 67
From: Ontario
Well
Interesting
I guess it would ... but holy double hockey sticks it would be loud
I think

You'd have an open intake to the compressor and a open compressor side.

It would likely ruin the turbo .. I think it would runaway
Try it and let us know
Reply
Old Jul 17, 2012 | 07:25 PM
  #3  
godesshunter's Avatar
Voids warranties
 
Joined: Aug 2011
Posts: 1,632
Likes: 0
From: southern new england
This could be just turbo noob talk, but I would thing the turbo lag would be unbearable without the boost to back it up. It would be interesting to hear the charge pipe constantly spooling to no avail though.
Reply
Old Jul 17, 2012 | 07:56 PM
  #4  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
are you sure it's using an emanage?
Reply
Old Jul 17, 2012 | 08:07 PM
  #5  
Renesis Noob's Avatar
Thread Starter
Registered
 
Joined: Jun 2012
Posts: 42
Likes: 0
From: Corpus Christi TX
Originally Posted by wcs
Well
Interesting
I guess it would ... but holy double hockey sticks it would be loud
I think

You'd have an open intake to the compressor and a open compressor side.

It would likely ruin the turbo .. I think it would runaway
Try it and let us know
Maybe install some cheap filter like Spector brand to provide some resistance?
Reply
Old Jul 17, 2012 | 08:09 PM
  #6  
Renesis Noob's Avatar
Thread Starter
Registered
 
Joined: Jun 2012
Posts: 42
Likes: 0
From: Corpus Christi TX
Originally Posted by laythor
are you sure it's using an emanage?
Unfortunately I'm not sure but the lack of anything else you would need for a proper tune isn't present so it's my best guess
Reply
Old Jul 17, 2012 | 08:12 PM
  #7  
Renesis Noob's Avatar
Thread Starter
Registered
 
Joined: Jun 2012
Posts: 42
Likes: 0
From: Corpus Christi TX
Originally Posted by godesshunter
This could be just turbo noob talk, but I would thing the turbo lag would be unbearable without the boost to back it up. It would be interesting to hear the charge pipe constantly spooling to no avail though.
I also agree it be under powered but probably No worse than factory
Reply
Old Jul 17, 2012 | 08:37 PM
  #8  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
Dude, just continue researching and fix the car properly. If you bought the car for the kit then don't risk jacking it up. It's obvious you have a lot to learn still if you can't even figure out if you have an E manage or not.
Reply
Old Jul 17, 2012 | 09:42 PM
  #9  
Renesis Noob's Avatar
Thread Starter
Registered
 
Joined: Jun 2012
Posts: 42
Likes: 0
From: Corpus Christi TX
Originally Posted by 9krpmrx8
Dude, just continue researching and fix the car properly. If you bought the car for the kit then don't risk jacking it up. It's obvious you have a lot to learn still if you can't even figure out if you have an E manage or not.
True as ever rpm, I guess I'll just chill till you can see it, I just keep thinking I'm gonna break it the more I drive with an improper set up
Reply
Old Jul 17, 2012 | 11:14 PM
  #11  
tiptoe's Avatar
Registered
 
Joined: Nov 2009
Posts: 43
Likes: 0
couldnt you just hold off the throttle a bit to avoid boost until you get the parts and tune you need?
Reply
Old Jul 17, 2012 | 11:52 PM
  #12  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,720
Likes: 345
From: Smallville
You could just wire the wastegate open...that will stop most of your problems...and then drive it carefully
Reply
Old Jul 18, 2012 | 12:13 AM
  #13  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by Renesis Noob
True as ever rpm, I guess I'll just chill till you can see it, I just keep thinking I'm gonna break it the more I drive with an improper set up
Well you can screw it up big time if you are ******* on it. You need to address this as soon as possible man. If you think you can manage the drive to San Antonio we can check it out see what's up and possibly get you situated. I would suggest buying a Cobb AP ASAP.
Reply
Old Jul 18, 2012 | 12:42 AM
  #14  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
Originally Posted by dannobre
You could just wire the wastegate open...that will stop most of your problems...and then drive it carefully
+1

if the car was tuned with an access port then you are doubly boned if it wasn't unmarried from your ECU. I would suggest contacting the seller.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
05TiGr8Lady
Series I Wheels, Tires, Brakes & Suspension
6
Aug 27, 2015 07:31 PM
dafiltafish
New Member Forum
1
Aug 21, 2015 06:56 PM
escapedan
Series I Do It Yourself Forum
3
Jul 29, 2015 10:44 PM
D MENAC 7
RX-8 Multimedia/Photo Gallery
25
Apr 23, 2004 09:46 AM
quinxy
Purchasing, Financing, & Insurance
2
Jul 18, 2003 05:05 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:04 AM.