RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   Syncro Saver Customer Feedback (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/syncro-saver-customer-feedback-168857/)

Race Roots 04-01-2009 11:20 PM

Only a few people have them and the ones that do enjoy them I would say there are 15-20 units out there. Not everyone is extremely vocal but, whenever I need a fair and impartial review I always go to Juan (marsredr100). He will be the first to tell me something sucks in a heartbeat.

swoope 04-02-2009 01:52 AM


Originally Posted by TeamRX8 (Post 2946955)
yep, the reason 3rd was grinding before my last rebuild

https://www.rx8club.com/attachment.p...4&d=1219189584

and i am going to guess you never over shifted or forced a gear? or maybe in competition bent a shift fork?

sorry. this mod is for you about 4 years to late!

just a guess..

beers :beer:

neXib 04-02-2009 01:59 AM

Thanks for clearing up the use. I guess it's more for those that drive spirited all the time though, I'm a tad careful even when I do drive spirited, and have the SS. Mine doesn't really seem to be going further once engaged, but then again I also had to dremel the SS a bit for reverse so maybe mine's a tight fit either way.

r0tor 04-02-2009 07:19 AM

[QUOTE=Fluid Motorsports;2946851]To clear up the confusion here,

This product stops the driver from forcing the shift lever past the point where the transmission is already in gear. During overshifting the synchronizer is forced farther on the hub than required for proper operation. This actually attempts to stretch the synchronizer cone over the hub which can distort the soft synchronizer changing the clearances and eventually may cause the synchronizer to actually break.
[Quote]

your missing part of the picture



Over shifting has caused synchronizer problems in transmissions for years, not just in Mazda automobiles but across a wide range of vehicles.
I'd be really interested in seeing these... talking to two mechanics that are firends of mine, another car forum, and a google search has come up empty...


If you look at many aftermarket shifters (for domestic vehicles) this is why they have shifter stops incorporated into them.
they have stops in them because most of the time the domestic shiters you order from a Jegs catalog are "universal fit":

05rex8 04-03-2009 06:27 PM

on the mustangs I had, all the name brand short shifters had stops built into them...they were application specific not universal jegs crap.

so what Brice says about the stops is absolutely correct in how they function and makes sense (to me anyway) that the synchro saver works the same way.

TeamRX8 04-04-2009 11:10 AM


Originally Posted by swoope (Post 2947582)
and i am going to guess you never over shifted or forced a gear? or maybe in competition bent a shift fork?

sorry. this mod is for you about 4 years to late!

just a guess..

beers :beer:


too early, too late, no matter

it's not SCCA Stock Class legal regardless ...

swoope 04-04-2009 10:46 PM


Originally Posted by TeamRX8 (Post 2951611)

it's not SCCA Stock Class legal regardless ...

really,

i find that odd. are you able to change shifters?

something that does nothing to enhance preformance yet protects the transmission is not allowed. how wrong is that? :(

beers :beer:

TeamRX8 04-05-2009 11:15 AM

nope ... having to live with certain faults from the manufacturer is part of the Stock Class game

not failing is a performance enhancement WRT racing since it ensures that you make it to the finish


.

r0tor 04-05-2009 01:46 PM


Originally Posted by 05rex8 (Post 2950773)
on the mustangs I had, all the name brand short shifters had stops built into them...they were application specific not universal jegs crap.

so what Brice says about the stops is absolutely correct in how they function and makes sense (to me anyway) that the synchro saver works the same way.

Explain how it saves the synchros then... enlighten me please

neXib 04-05-2009 04:45 PM

Why not call it a Shifter stop then?

GR8T8 04-13-2009 08:52 PM

Syncro waste of time
 
I am sorry to say after spending 2 weeks adjusting this "Syncro-Saver" and getting the run around from Fluid Motorsports:banghead: i am basically going to have to lose my $140.00, 2 weeks of grinding gears, popping out of gears has left me livid, but i was calm until i was told by them that thier would be a 25% restocking charge:Eyecrazy: and it had to be un-used:uhh:and new before i could return it:eyetwitch. My recomendation don't waste your money on 6 bolts and 2 hunks of metal with a piss-poor warranty...:rant:

jsjjr 04-13-2009 09:02 PM


Originally Posted by GR8T8 (Post 2966878)
I am sorry to say after spending 2 weeks adjusting this "Syncro-Saver" and getting the run around from Fluid Motorsports:banghead: i am basically going to have to lose my $140.00, 2 weeks of grinding gears, popping out of gears has left me livid, but i was calm until i was told by them that thier would be a 25% restocking charge:Eyecrazy: and it had to be un-used:uhh:and new before i could return it:eyetwitch. My recomendation don't waste your money on 6 bolts and 2 hunks of metal with a piss-poor warranty...:rant:

Ha! At least you're getting some type of response. I've sent 2 emails and have had no response from them for a refund. It's still sitting in the package.

Race Roots 04-14-2009 10:14 PM


Originally Posted by jsjjr (Post 2966907)
Ha! At least you're getting some type of response. I've sent 2 emails and have had no response from them for a refund. It's still sitting in the package.


Got it send me an emai here at rx8sales@fluidmotorsports.com

Surprisingly I must have missed this post.

jsjjr 04-14-2009 10:20 PM


Originally Posted by Fluid Motorsports (Post 2969085)
Got it send me an emai here at rx8sales@fluidmotorsports.com

Surprisingly I must have missed this post.

We'll get it hashed out tomorrow. At least I was correct in one regard...it was the next post after the op.. (just the wrong thread):)

Race Roots 04-15-2009 11:50 PM

After getting customer feedback on pricing we have decided to adjust pricing to $125.

The change in price is reflected on the website for ordering purposes.

G3tR3DDY2GR3DDY 05-23-2009 07:51 PM

installed one of these the other day.

In an honest evaluation, and i have done every other mod on my car imagineable, its a good insurance policy. It doesnt really change much except for driver error. You will not be able to overshift IF YOU SET IT CORRECTLY. the people who are complaining about coming out of gear or still making noise do not have it installed properly

you should be able to hear a click after you are in gear fully. if it comes out of gear adjust it. that simple

Now when i drive i am not concerned about what happens if i slam into gear real quick or leave my hand on the gear shift while driving..

recommended. i like it. there are other pointless things you spend even more on so why not.

tubingchamp 05-23-2009 07:56 PM

^^

Agree.

Also, you have to take the top portion off and flip it upside down to fit properly (I had to anyways). How it came, the bottom gears had too much space and could still be over-shot (although, you're more likely to overshift in 1,3,5 than 2,4,6..).

rx8thunder 05-23-2009 08:17 PM

I've had the syncho savers in now for about 3 weeks. They were very simple to install and have no problems post install. I have no idea as to whether they will save me synchros and frankly I don't care, that is not why I bought this product.

I bought the product because I liked the definitive clicking sound that comes with each shift - it puts a smile on my face :) On that front, this mod is great! Hey, we do a lot of mods for sound, right? Why not this one!!! Recommended.

Race Roots 06-04-2009 01:16 PM

I am glad everyone is enjoying this, I know I love mine :)

wcs 06-05-2009 06:03 PM


Originally Posted by rx8thunder (Post 3035794)
I've had the syncho savers in now for about 3 weeks. They were very simple to install and have no problems post install. I have no idea as to whether they will save me synchros and frankly I don't care, that is not why I bought this product.

I bought the product because I liked the definitive clicking sound that comes with each shift - it puts a smile on my face :) On that front, this mod is great! Hey, we do a lot of mods for sound, right? Why not this one!!! Recommended.

Hey Scott
Thanks for letting me check out the syncro saver in your car.
I've ordered and should have in my hands by end of next!
w00t can't wait.

SiLVeRE8 06-06-2009 04:37 AM

I have had this on my car for over 7,000 miles now and tranny is still healthy. No problems at all... none of the popping out of gear stuff going on which some are complaining about. I also feel very confident changing gears during WOT because I know I will not overshift. Also one thing this keeps me happy is that everytime I hear a click I am sure that I am in gear!

TeamRX8 06-06-2009 12:37 PM

I only wished the class rules would permit me to use this because I'd install it on mine pronto if I could

shazy 06-07-2009 11:03 AM

:)

Atleast you are on the positive side now Teamrx8

NoOdLe BoY 06-07-2009 09:00 PM

hmm this sounds interesting. i might get it after i buy my rims.

but then again i wanna stay in STX and this wont be legal. aswell as my clutch bracket. :(

TopGear8 06-07-2009 09:17 PM

^What wheels are ya getting?


All times are GMT -5. The time now is 08:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands