RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   Syncro Saver Customer Feedback (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/syncro-saver-customer-feedback-168857/)

Kinky Unikorn 10-20-2013 03:25 AM

I've been reading through this thread and this seems like a great product, if I purchase this, would this mask my synchros problem already? Few months ago, my 3rd gear would grind in high rpm when shifting into 4th, took it to Mazda, they told me it was the brass rings that were wearing out and that I needed to replace my whole transmission and they would give me a used one for $2,500 with labor included -___-

I told them I'd check elsewhere, and I ended up using the Redline Transmission Fluid which prolongs the life of the transmission and it actually did! Helped a lot and I didn't hear it grinding anymore, just recently, I'm noticing it grind again, and was wondering if I buy this would it prevent my gears from grinding and prolong my transmission even longer?

Beodude 10-31-2013 05:15 PM

Things like that will only be a bandaid. That said, dealerships aren't exactly known to hit the nail on the head when troubleshooting problems. But it certainly can't hurt. Less pressure on the synchros is a good thing.

I installed mine a while back, and I enjoy it. I never did try and slam it in gear or shift faster than it wants to, but it's certainly an added piece of mind.

Danny Leblanc 11-06-2013 02:59 PM

Im gonna buy it this winter when im drop my tranny because my syncro of 2 and 5 is dead, im hope this save my next tranny XD

Kinky Unikorn 11-06-2013 05:47 PM


Originally Posted by Beodude (Post 4539872)
Things like that will only be a bandaid. That said, dealerships aren't exactly known to hit the nail on the head when troubleshooting problems. But it certainly can't hurt. Less pressure on the synchros is a good thing.

I installed mine a while back, and I enjoy it. I never did try and slam it in gear or shift faster than it wants to, but it's certainly an added piece of mind.

Thanks man, that is good to know. I'll probably see if I can pick one up come Christmas.

TeamRX8 11-06-2013 08:32 PM

I pretty much stopped blowing up S1 6-spd transmissions on drag-type 1-2 shifts once I installed one

It does prevent over-stuffing gears during hard, fast shifts when adjusted properly.



.

TeamRX8 05-19-2020 12:01 PM

bump, anyone have a used one to sell?

ktec 07-03-2020 12:39 PM


Originally Posted by TeamRX8 (Post 4918899)
bump, anyone have a used one to sell?

Unless there is a solution to fit the inner rubber boot back on, I may remove mine. There were a few members that were against this product and called it inelegant for how the OEM boot had to be cut up. You're really claimingYou stopped blowing up transmissions because of this product?

dannobre 07-03-2020 01:48 PM

They work very well to prevent the over shifting that seems to break these boxes.


ktec 07-05-2020 07:36 PM


Originally Posted by dannobre (Post 4922825)
They work very well to prevent the over shifting that seems to break these boxes.

And is there a solution to getting the intact inner boot on? Or cut up is the only way

TeamRX8 07-06-2020 12:04 PM

it only helps if you’re slamming gears like 1-2 shift when drag racing, it does nothing else for transmission life otherwise


All times are GMT -5. The time now is 05:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands