so i have the blue greddy emanage ultimate as my new computer an i followed the correct way to start it an it only cranks i unflooded it an it still just cranks..one issue i noticed is that my vacuum "that connects to the new air pump pressure hose greddy gives you" turns on an stays on for a while when i turn the key in the off position. what is causing that to happen an why wont it start.. i tried pull starting it an that didnt work.. i bought all new plugs as well

 

 

you cant use IMG tags on a file hosted on your PC. it has to be hosted on the web

 

 

i have all my pics commin to chk the set up

 

 

 

 

 

 

Get rid of the e-manage and you will have a much better time tuning and getting the car to work....

Buy an AP....it's a much more versatile way to run a Greddy Turbo on an RX-8....

 

do all my lines seem to be run correctly..i am only using the one vacuum line from behind the manifold an it T's off 3 different ways.. is that to much it goes to the actuator the bov an the boost harness sensor

 

Search for " Greddy Turbo Fixes" and it will help you run the correct locations for the lines.....

The Blue E-manage will be the biggest of your problems....

 

i still coudlnt get it to start when i put the stock computer back in

 

ok yea maybe ill have to get a new mep retune

 

You could have easily flooded it.....try the deflood procedure with the stock ECU and it should start...

Have you changed the injectors?

 

 

 

 

 

no i did not change the injectors? should i have..i didnt think you needed to unless you were running high boost..should i change them

 

Not needed..but it could have explained why the car wouldn;t have started...

Try the deflood...or pull it to clear out the crap and start it....

I'm not kidding about the E-manage..there are no good things to report by using it

 

and if i need to change them what would u recomend that i get...brand an cc?

 

really? why is that comp so messed

 

Short answer...it doesn't work