sixgen3sgte

I am installing the interceptor on a SSR turbo kit, with 720cc injectors
and the car won't start

Scott put a map that (according to him) should crank the car and drive decent

and he said he put the normal turbo map too,

and i'm trying to get to that one but i can't figure out how to change the maps

i don't have the booklet that came with the interceptor with me (its two hours away)


does anyone have any eperiance tuning the interceptor

he gave the names of the maps but i can't remember how to get to them if he even told me

Moostafa29

Check the fuse on the positive battery line. Its probably blown if your car won't start. If I remember correctly, if you need to alter the maps, you press "P" in the map screen you want to alter.

evilmiata

Be sure you have a solid green light. The yellow one will quickly flash when the car is running (and maybe if the computer is simply turned on). Also, try Function->Load Maps. I hate how we can't play with maps without having the laptop hooked up to a car.

flyboi1121

make sure the blue vacuum hose from ur interceptor is directly connected to your throttle body w/out the white ball thingy

MazsportScott

The preinstalled map will run the car with the supplied injector setup only if the connectors are connected correctly. Since they are not, connect to the system using f1 or f2 and toggle to the right using your arrow keys. Look for the display to read "Load Turbo 93" or "Load Turbo 91" ( ignition tables based on available octane ). If they are present pick one of the maps, press and hold "p" for program. Once the screen says "programming passed" start the car. Either way call me tomorrow from the car with the laptop connected and I will walk you through some other options. Hope this helps,Scott

sixgen3sgte

thanks scott, that helps a ton, i'll have to go try that

i'll give you a call tomorrow, i'll be at the dyno at 1pm ct so 12 for you

so i'll be trying trying to get in touch with you then


and yeah i knew about the first three things people suggested, i've watched the video 20 times lol

Macius8

iTrader: (3)

Nice, setup you have going there. Post the results after you get back from the dyno. Good luck with the car.

MazdaManiac

iTrader: (3)

What position are the 720's in?

sixgen3sgte

Hey i'm at the dyno, and i'm not completely sure how to save and load the maps, can some one clear this up

I need to know how to rename the maps and save and load from the hard drive if possible

thanks

MazdaManiac

iTrader: (3)

Go to the start screen and use the arrow keys to step to the right through the 4 save positions. To load a map, do the same thing, but the load positions start from the 5th click on.
Therer are only four positions and the first two should have your 93 and 91 octane default maps, so only use positions 3 and 4 to save (corresponding to positions 7 and 8 to load).

sixgen3sgte

I need to know how to rename the maps and save and load from the hard drive if possible

MazdaManiac

iTrader: (3)

You can't save to the hard drive.

sixgen3sgte

ok i got it figured out last night

But i need scott to call me asap i may have a bigger problem