Notices
SE RX-8 Forum Serving NC, SC, GA, FL, AL, TN

darkside DE event Oct At Roebling

Old Nov 4, 2008 | 06:46 PM
  #226  
Kurt Bob's Avatar
Registered
 
Joined: Jan 2003
Posts: 286
Likes: 0
From: Augusta, GA
Originally Posted by SilverEIGHT
All seems well now. Charlie gave me some phone support this evening while I was under the car and I was able to locate the problem. I will get the part tomorrow and get-er-fixed.
That's the spirit!

Hopefully, the only other adjustment you will have to make will be tightening the nut behind the wheel
Reply
Old Nov 4, 2008 | 06:52 PM
  #227  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
Originally Posted by SilverEIGHT
All seems well now. Charlie gave me some phone support this evening while I was under the car and I was able to locate the problem. I will get the part tomorrow and get-er-fixed.
motor mount? the one on the pass side?

beers
Reply
Old Nov 4, 2008 | 07:36 PM
  #228  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
Originally Posted by Kurt Bob
That's the spirit!

Hopefully, the only other adjustment you will have to make will be tightening the nut behind the wheel
That nut's always loose!

There are 4, 21mm nuts that hold the transmission to the black metal support that runs the length of the drive shaft. Two upper ones and two lower. One of the lower bolts was loose and the other gone! This caused my transmission to drop down about 1/2" to 3/4" and touch the front cross brace. Not sure all the proper terminology but I think you get the picture.

This was causing the transmission to jump up about 1" when I would push the gas while driving. I've had bumping sounds for a while now and I suspect this was the problem.

So to fix it. I will leave my car up on jack stands, use my floor jack to lift the transmission up about an inch, loosen all 4 bolts, adjust the height of the jack if needed, tighten the 4 bolts... drop and drive. I will be using Chaz's super secret scientific means for measuring the height of the transmission.

Do any of you guys get the ******* when working underneath your car while it sits on jack stands? Even though I have the wheels chocked and the brakes on, I can't stop thinking the car is going to roll off the stands and make me loose all my body fluids.
Reply
Old Nov 4, 2008 | 07:54 PM
  #229  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
Originally Posted by SilverEIGHT
All seems well now. Charlie gave me some phone support this evening while I was under the car and I was able to locate the problem. I will get the part tomorrow and get-er-fixed.
I can stop crying now.... whew - WTG... you nut you...
Reply
Old Nov 4, 2008 | 08:03 PM
  #230  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
Thanks Jacke! Now you have to put up with a nut case this weekend!

Thanks Lego for making my day! I just received a package with my stickers and numbers. I now have magnetic RED #52's, large MAZDA logos for over my back wheels, Mazdaspeed for my hood, large SilverEIGHTStudio to go accross the windshild and track labels for the back windshild... LEGO ROCKS! Great pricing and a great friend.

I may not be able to drive fast but I will look like it till I get on track!
Reply
Old Nov 4, 2008 | 08:05 PM
  #231  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
Originally Posted by SilverEIGHT
That nut's always loose!

There are 4, 21mm nuts that hold the transmission to the black metal support that runs the length of the drive shaft. Two upper ones and two lower. One of the lower bolts was loose and the other gone! This caused my transmission to drop down about 1/2" to 3/4" and touch the front cross brace. Not sure all the proper terminology but I think you get the picture.

This was causing the transmission to jump up about 1" when I would push the gas while driving. I've had bumping sounds for a while now and I suspect this was the problem.

So to fix it. I will leave my car up on jack stands, use my floor jack to lift the transmission up about an inch, loosen all 4 bolts, adjust the height of the jack if needed, tighten the 4 bolts... drop and drive. I will be using Chaz's super secret scientific means for measuring the height of the transmission.

Do any of you guys get the ******* when working underneath your car while it sits on jack stands? Even though I have the wheels chocked and the brakes on, I can't stop thinking the car is going to roll off the stands and make me loose all my body fluids.
wow,

this is the first case of a loose ppf.. good call by charlie.. wow..

beers
Reply
Old Nov 5, 2008 | 04:42 AM
  #232  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
Dano & OD, I will be leaving work at 11:30 on Friday and headed to pick up TA. Don't know what time's for meeting up will be yet.
Reply
Old Nov 5, 2008 | 05:12 AM
  #233  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
Someone falling down on the job? Lack of interest? What gives? No big 2 ------ oh it's so close...
Reply
Old Nov 5, 2008 | 06:17 AM
  #234  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
Guess it's the post election blues.
Attached Thumbnails darkside DE event Oct At Roebling-audi_r10_2.jpg  
Reply
Old Nov 5, 2008 | 06:26 AM
  #235  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
I wasn't for election - I was for revolution. We still have that right, yes?
Reply
Old Nov 5, 2008 | 09:06 AM
  #236  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
2!


Just been busy as heck finishing up work so can go play!

I am now free! freefreefreefreefree!!!

Ha! w00t..
Reply
Old Nov 5, 2008 | 10:45 AM
  #237  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
Don double and triple check the ppf spacing. thats the long metal brace thing
If it is off by just a 1/4 inch it can cause noise in trans, shifting problems etc.
while you are under there double check the exhaust support as it was surely strained during this.
Question is --why did this thing come loose?
You may want to put some locktight on those bolts.
You have my cell # --right. Sounds like it will be around 1:30 or so before yall hit Macon?
OD
Reply
Old Nov 5, 2008 | 12:25 PM
  #238  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
OD, I will dbl check all the bolts while under there. I did have trouble shifting into 3rd at TGPR. I didcussed that with TA while we were there. I think this is probably why. I think it could have started coming loose before then and the track probably released it. I have no clue when the nut came off though. Anyway, I have the replacement nut now (thanks to Paul at Mazmart) and will get her fixed tonight.

As far as meeting up goes. I'm waiting to hear back from TA. He's got a few things to work out. We'll probably talk this evening and we'll get back-at-cha.
Reply
Old Nov 6, 2008 | 01:25 AM
  #239  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
1!!!!!!

Yessir! Packing is under way!

OD - more details tomorrow, but the plan is to leave from near Charlies at around 12:30 and hit Macon around 1:45 or 2:00. We all plan to have had lunch already.
Tech at the track ends at 6 - so hopefully we can get set up and get that completed by dark.

If not, they are doing tech Fri night at the host hotel. I have a feeling that will be a fun place to hang out and see who brung what and talk cars.



Are we there yet?
Reply
Old Nov 6, 2008 | 01:47 AM
  #240  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
Jackie -

Hey- Congrats. Was looking something up on the site and see you have sold out.
Very Nice!
Reply
Old Nov 6, 2008 | 02:49 AM
  #241  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
Originally Posted by dbright007
Jackie -

Hey- Congrats. Was looking something up on the site and see you have sold out.
Very Nice!
Thank you...

And it was weird... I would lose an instructor at 7:20 a.m. and by 8 a.m. another qualified instructor would be contacting me to if I had room for him. I'd lose a green at 10am and by 11, two greens would be contacting me.... In the last 72 hours I have probably lost as many as 20 and gained that many back... One who can't be with us for the weekend, wanted to know if he were to drive up could he come for BBQ... but last night, I received a call from some old Porsche buddies of mine, all PCA drop outs -- and they would like to visit us at the track on Saturday. I LOVE IT!!!

See you -- oh my, in one day...

Jackie

and if I haven't thanked all of you yet for making this fun, letting me participate on your forum and having the countdown that has put a smile on my face -- then THANK YOU and see you soon... real soon... like tomorrow

Reply
Old Nov 6, 2008 | 03:34 AM
  #242  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
Originally Posted by DarkSideDE

and if I haven't thanked all of you yet for making this fun, letting me participate on your forum and having the countdown that has put a smile on my face -- then THANK YOU and see you soon... real soon... like tomorrow

And thank you Jackie!
It is fun having you on here!
When this is over, don't you forget to remind us of the upcoming events.

We may be Track-Ho's, but now and then we need a track-pimp to point us in the right direction,
Reply
Old Nov 6, 2008 | 03:45 AM
  #243  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
Psst - what are you doing up at 4:45 a.m.?
Reply
Old Nov 6, 2008 | 08:42 AM
  #244  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
YeeeHaaa! w00t-w00t! 26 Hours and I will be on my way to Marietta to pick up TrackAddict and start the caravan with Dano and meet up with Olddragger in Macon.

OD, will you be waiting at the on ramp, or meet you at that gas station right off the interstate?
Reply
Old Nov 6, 2008 | 09:51 AM
  #245  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
Originally Posted by SilverEIGHT
YeeeHaaa! w00t-w00t! 26 Hours and I will be on my way to Marietta to pick up TrackAddict and start the caravan with Dano and meet up with Olddragger in Macon.

OD, will you be waiting at the on ramp, or meet you at that gas station right off the interstate?
Then you will enjoy the final register tally: 126! (Two are Taste of the Tracks; 42 are instructors
Reply
Old Nov 6, 2008 | 10:22 AM
  #246  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
lets met at the gas station (across the road) yall can gas up and stretch your legs etc
home phone number --just call when yall are about 30 mins out--like just past Summit Racing.
WOOT!
at my age I can only do WOOT once--then I have to rest--I will WOOT again later tonight
OD
Reply
Old Nov 6, 2008 | 02:51 PM
  #247  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
Originally Posted by DarkSideDE
Psst - what are you doing up at 4:45 a.m.?
I work 7Pm to 7:30Am.
Even on my off days I pop awake in the middle of the night for a little while (unless I am really worn out by a day of track or something)

So at least I have an excuse... :-)
Reply
Old Nov 6, 2008 | 09:46 PM
  #248  
dbright007's Avatar
Book em' Dano
 
Joined: Oct 2006
Posts: 797
Likes: 0
From: Smyrna, GA
Bwa-hahahahahah!

Car is packed! Meeting times are set! Yeah baby!

So I did Pwn myself tonight...while packing the car, I am hearing this weird hissing noise. Damn, did I break something? Where the F is that coming from?

I had forgotten to switch the sunscreen bottle top to Closed - something leaned against it and now my whole trunk, track bag, me, etc smells like coconuts.
Ah well, minor issue...

But it's ok

I like coconuts
You can break them open
They smell like ladies lying in the sun
I like coconuts
You can break them open
They smell like ladies lying in the sun
And if I had my way
I'd give a coconut to everyone

Coconuts

See you guys tomorrow.
Reply
Old Nov 7, 2008 | 04:36 AM
  #249  
SilverEIGHT's Avatar
Registered
 
Joined: Nov 2004
Posts: 4,866
Likes: 4
From: Buford, GA USA
0

Great belly laugh first thing this morning.

All packed and getting ready to head to a half day of work. Will probably feel like a full day. I will try to concentrate on the job but it's gonna be tough.
Reply
Old Nov 7, 2008 | 05:11 AM
  #250  
DarkSideDE's Avatar
Registered
 
Joined: Sep 2008
Posts: 100
Likes: 0
From: Bluffton, SC
NO MORE COUNTDOWN

IT'S TIME.....
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:21 AM.