My 1/4 mile adventure!!
U-Stink-But-I-♥-U
iTrader: (1)
Joined: Mar 2005
Posts: 2,004
Likes: 2
From: 12 o'clock on the Beltway.
Originally Posted by RX8INCH
oh yea 15.1 adjusted time (this way i dont feel horrible about it) 
Really appreciate you posting your times, bad or good. Interesting (if somewhat mysterious) thread.
Thread Starter
RX8INCH
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
HAHAHA duhhhh? My CZ has been off since I installed it in the car. LOL I dont feel that smart right now. If I can make it up to LACR wed I will do a few more runs... Any one up for joining me?
Thread Starter
RX8INCH
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
well I was kinda upset bout my times.. and i was researchin on the CZ and on the install how it shows ans on/off switch.. well I thought i would make sure mine was on.. sure enough when i checked it was on off! LOL yea so im going back to the track and HOPFULLY this time my times will reflect the gains. *EG*
you 60 ft times are a bit slow. i am going to give to you that you are killing tc and dsc.
the quickest way i have found to 60 ft is rev to 5 5.5k and dont just dump the clutch feather it in quickly. this avoids wheelspin and hop. you have to practice it. and yes it will wear your clutch.
when you can smell the clutch, put the car away for the night.
beers
the quickest way i have found to 60 ft is rev to 5 5.5k and dont just dump the clutch feather it in quickly. this avoids wheelspin and hop. you have to practice it. and yes it will wear your clutch.
when you can smell the clutch, put the car away for the night.
beers
Banned
Joined: Jun 2005
Posts: 660
Likes: 0
From: cali baby
Originally Posted by RX8INCH
no it was a manual.. thats why I posted manual time for the 1/4 mi on the 350... and he dident miss any gears that i know of my windows were down and i could hear his engine right next to me...
350z MT > RX8 MT
straight away...
Thread Starter
RX8INCH
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
hey im going to the track again tonight... Im running my stock Dunlop SP's Is it better if i do burnouts or dont do them? I was doing them last time but my friend told me not to...
"Call me Darkman"
Joined: Aug 2004
Posts: 2,034
Likes: 0
From: Toronto/Florida
Originally Posted by RX8INCH
hey im going to the track again tonight... Im running my stock Dunlop SP's Is it better if i do burnouts or dont do them? I was doing them last time but my friend told me not to...
Thread Starter
RX8INCH
Joined: Aug 2005
Posts: 80
Likes: 0
From: Los Angeles, Ca
well i went back to the track tonight... here are my best times
Best ET adjusted for sea level
15.287@91.222 = 14.828@93.957
Best MPH
15.491@92.588 = 15.026@95.366
I did run with another 8
he ran a 15.953@89.770 intake and exhaust
I ran a 15.415@90.645 canzoomer and midpipe
60ft 2.245 one run i got a 2.217
Best ET adjusted for sea level
15.287@91.222 = 14.828@93.957
Best MPH
15.491@92.588 = 15.026@95.366
I did run with another 8
he ran a 15.953@89.770 intake and exhaust
I ran a 15.415@90.645 canzoomer and midpipe
60ft 2.245 one run i got a 2.217
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
38
May 14, 2024 06:57 AM
Audio Concepts ATL
New Member Forum
21
Sep 26, 2021 01:59 PM
drebbrnator
Series I Trouble Shooting
11
Dec 27, 2018 07:02 PM
TeslaMSI
New Member Forum
11
Dec 10, 2015 01:10 AM