3 Inch Harness ??
02-07-2009, 05:18 PM
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Flower Mound, TX.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
3 Inch Harness ??
Does anyone make a 3" 3 or 4 point harness?
3" is much more comfortable than 2".
The use is for autocross so a 5 point isn't really necessary.
Thanks
SOLO
3" is much more comfortable than 2".
The use is for autocross so a 5 point isn't really necessary.
Thanks
SOLO
02-08-2009, 10:30 AM
#5
Registered
iTrader: (1)
Join Date: May 2006
Location: Carolina Beach, NC
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
How are you anchoring the harnesses? Do you have a 4 pt roll bar installed or anything for the shoulder belts? Are you anchoring the laps belts to the floor board? Only reason I ask, is cuz it's a real bad idea to run a harness if it's not installed properly. You would get hurt more from running an improperly installed vs a the stock seat belt if something should happen out on the course.
Last edited by I8U; 02-08-2009 at 10:38 AM.
02-08-2009, 01:20 PM
#6
He's as bad as Can
The speeds of auto x are slower than HPDE otherwise I wouldn't recommend this but a belt like the one below can bolt into an 8 using the OEM rear seat floor mounts and the rear child seat LATCH anchors.
DO SO AT YOUR OWN RISK!
DO SO AT YOUR OWN RISK!
Thread
Thread Starter
Forum
Replies
Last Post
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM