{FS/WTT} Part out/My aftermarket parts for your stock parts!
#1
:D
Thread Starter
Join Date: Feb 2008
Location: Seoul, South Korea
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Volks, RP, RB, Progress etc...Part out/My aftermarket parts for your stock parts!
Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I, Series II
Location (US State/Canada/Int): LA
Item Condition: Used
New Factory Aero parts:
- Front Air dam (Velocity red) 250 +shipping
- Side Aero flares (Velocity Red) 250 +shipping
Volk SF Challenges - Tiny curb rash on all wheels. The driver side rear wheel has paint scraped off the spokes due to the aforementioned collision (see attached pic). This may or may not be repaired by my collision shop. I'll update when I find out for sure. Ran these with 10mm spacers up front to bring the wheel flush with the fender. No rubbing with or without spacers.
1000 obo
3 of the wheels have tpms in them. A shop didn't attach one of the correctly during tire replacement. It was removed. Replacement brackets will be included.
The wheels have Toyo T1R tires. Rears ~5000mi/Fronts ~35k
Front: 19x8.5 +29
Rear: 19x9.5 +48
Will ship if buyer pays half of shipping cost.
Brand new Turbo XS test pipe, still in box. - 100 shipped
Used XCarlink iPod integration - 100 shipped
Used Black Rays lugs; 5 are slightly stripped. Includes lock - 75 shipped obo
WTT Used Megan coilovers(35k mi) with new damper inserts w/~650 mi 500 shipped obo
- Will need your STOCK suspension first
WTT Used RP Supercat w/~15k mi 50 +shipping
- Will need your STOCK cat first (no dead cats please).
WTT Used Racing Beat Catback w/~35k mi 350 +shipping
- Will need your STOCK exhaust first
WTT Used Progress Sway bars F&R 200 shipped
- Will need your STOCK sway bars first
Last edited by dwdgsi04; 05-02-2011 at 02:14 AM. Reason: changed title
#4
:D
Thread Starter
Join Date: Feb 2008
Location: Seoul, South Korea
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Test pipe is actually to be delivered to my house on the 5th. I ordered it last week anticipating installing it, but I was in a wreck. I'll take a pic when it arrives.
Same thing for the wheels: I'll take close up pics once I get the car back, I've some photos of them below if you'd like to see them, though. As far as the condition. The condition is great, save for some *very* minor scuffs on them (like 2"/per wheel). Can easily be buffed out.
The first two pics are about 5 months old, without the spacers.
The 3rd and 4th are taken just a couple weeks ago, with the spacers up front.
The last is taken a couple weeks ago, just before the spacer install.
The lips could use another polishing, which I can do before they are shipped out.
#6
Registered
Join Date: Nov 2010
Location: Berkeley, CA
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Is the RP the new or old model? and don't they just about die at 15k miles? Does it throw a CEL?
How much is shipping for the exhaust to 94705?
How loud is your current set up?
How much is shipping for the exhaust to 94705?
How loud is your current set up?
#7
:D
Thread Starter
Join Date: Feb 2008
Location: Seoul, South Korea
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
It is the updated RP Supercat model. I waited until they fixed that issue to order mine. It doesn't throw a CEL for me, so there must still be life in it.
As far as shipping quotes go, the parts are still on my car. I can try and get a rough estimate for you based on the weight of the item though.
How loud is it? Nice idle rumble; Kind of raspy in the midrange around 4.5k-5.5k; Sounds beautiful up top. No droning cruising at highway speeds believe it or not. Pops flames occasionally.
Here are two video clips for you:
http://www.youtube.com/watch?v=HXO_JIgq6Kw
http://www.youtube.com/watch?v=IakkniNPjo0
#10
:D
Thread Starter
Join Date: Feb 2008
Location: Seoul, South Korea
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
I didn't keep any of my stock parts because the weight they added to my household goods shipment from the Air Force would have pushed me over my limit.
I will go scour some local u-pull-its to see if I can source replacement parts. In the event that I can, I'll update this thread to sell the items w/o trade.
#12
do you have any of these parts avalible...
Im intrested in the exhaust, and iPod integration...
or could you just tell me what elese you have, and what you need stock...
could you just text me at 830-305-8268
Im intrested in the exhaust, and iPod integration...
or could you just tell me what elese you have, and what you need stock...
could you just text me at 830-305-8268
Thread
Thread Starter
Forum
Replies
Last Post
AllSeeingChris
RX-8 Parts For Sale/Wanted
6
08-16-2015 12:35 PM
cschoeps
RX-8's For Sale/Wanted
0
08-06-2015 12:44 PM