{ FS } Full 3" Titanium Header back single exit exhaust
07-16-2014, 06:37 PM
#1
Full 3" Titanium Header back single exit exhaust
Category: Engine - Exhaust
Price: $450
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I, Series II
Location (US State/Canada/Int): NY
Item Condition: Used
Last edited by GK1707; 01-29-2015 at 09:18 PM.
07-19-2014, 08:38 AM
#4
The previous owner of the exhaust was turbo, and said it sounded amazing with the Greddy kit and BNR upgraded turbo. I heard this exhaust on his car after he took the kit off and went NA and its pretty damn loud on an NA 8. Kinda like an F1 car but still has deepness at low RPMs.
07-19-2014, 01:40 PM
#6
exhasut
The previous owner of the exhaust was turbo, and said it sounded amazing with the Greddy kit and BNR upgraded turbo. I heard this exhaust on his car after he took the kit off and went NA and its pretty damn loud on an NA 8. Kinda like an F1 car but still has deepness at low RPMs.
07-19-2014, 10:20 PM
#7
Bump for the previous owner of this exhaust^
and this is another video of it on the actual Speedsource Rx8, you can get a little better view of the exhaust and hear it. Then again like mentioned its a ported 20B so cant really compare sounds to a renesis.
07-20-2014, 10:36 PM
#8
Driver of #50 RX8
iTrader: (3)
Join Date: Apr 2010
Location: New Hampshire
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
has this been test fitted in a car yet? the car in the videos your showing is not really an RX8, it is a hybrid of the shell and more tube framed than you would think as well the body panels are all custom made to look like an RX8. totally different transmission tourque tube, engine and drive shaft than we have.
Can you get me the contact info for whom you purchased it from so I can ask them whom they sourced it from.
Thanks,
Stephen
Can you get me the contact info for whom you purchased it from so I can ask them whom they sourced it from.
Thanks,
Stephen
07-21-2014, 09:07 AM
#9
Spinning Dorito Junkie
iTrader: (2)
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like
on
1 Post
If it's from a Speedsource built car, I had assumed it was from a former Koni challenge car which uses a Renises and a stock unibody.
As I recall, the Rolex 3 rotor tube frames have Iannetti thermal reactors, and I believe Inconel piping. (The surplus cars I've seen posted for sale have not had the Iannetti parts as they were actually leased, not owned by the teams.)
As I recall, the Rolex 3 rotor tube frames have Iannetti thermal reactors, and I believe Inconel piping. (The surplus cars I've seen posted for sale have not had the Iannetti parts as they were actually leased, not owned by the teams.)
07-21-2014, 02:05 PM
#10
has this been test fitted in a car yet? the car in the videos your showing is not really an RX8, it is a hybrid of the shell and more tube framed than you would think as well the body panels are all custom made to look like an RX8. totally different transmission tourque tube, engine and drive shaft than we have.
Can you get me the contact info for whom you purchased it from so I can ask them whom they sourced it from.
Thanks,
Stephen
Can you get me the contact info for whom you purchased it from so I can ask them whom they sourced it from.
Thanks,
Stephen
Yes this has been fitted to an Rx8 before. The previous owner of the exhaust actually posted in this thread. I've seen and heard the exhaust on another Rx8 but never actually installed it on my own.
07-25-2014, 07:39 PM
#12
PM me if you're interested! I'm willing to work out a price. I actually heard it on Stigmas car after he took of the turbo kit and this thing is LOUD! He said it sounded amazing when he was turboed. Also if you're turboed might have to get retuned to run this exhaust, or so I've heard from stigma, It drops backpressure alot.
08-09-2014, 06:39 PM
#18
Driver of #50 RX8
iTrader: (3)
Join Date: Apr 2010
Location: New Hampshire
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys, It looks like it was made for a regular header not a long tube header. I have a speed source header (much longer than stock) so it didn't just bolt up to it. We will work on it and post something up in a few months!
Stephen
Stephen
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
09-26-2021 01:59 PM