{ FS } Complete Turbo Setup Greddy GT3076R
#1
Complete Turbo Setup Greddy GT3076R
Category: Engine - Power Adders
Price: $7000
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): FL
Item Condition: Used
DO NOT ASK IF I WANT TO SELL ANYTHING SEPARATELY AT THIS POINT!
The kit is still on my car and may come off if the right buyer comes along.
Been on my car for ~7k miles, haven't really had any problems with it.
The turbo has less than 17k miles.
Only reason for selling is because I'm possibly going a different route.
Greddy Turbo Kit with Garrett GT3076R
Ceramic Coated Manifold, Downpipe, and Turbine Housing
Turbosmart Wastegate Actuator
Synapse DV
Synapse Boost Connect Hard Lines
Mazsport Intake
Custom 2.75" Piping from Turbo to Intake
Tial Silicone Couplers
Tial T-Bolt Clamps
2 Uncapped Yellows
BHR Ignition
Custom Intake Tray
Cobb AP
Greddy Profec E-01(Needs new boost sensor)
Greddy Oil Pan
Prosport Oil Sandwich Plate
Prosport EVO Boost Gauge
Prosport EVO AFR Gauge
Price: $7000
If someone is serious about buying the main components of the turbo kit and does not wan't the supporting Mods we can work something out.
Will not separate:
Greddy Turbo Kit with Garrett GT3076R
Ceramic Coated Manifold, Downpipe, and Turbine Housing
Turbosmart Wastegate Actuator
Synapse DV
Synapse Boost Connect Hard Lines
Mazsport Intake
Custom 2.75" Piping from Turbo to Intake
Tial Silicone Couplers
Tial T-Bolt Clamps
Price: $6000
If the kit sells FIRST I will sell these components separately(Please do not message me or make offers on these components until the kit sells FIRST):
2 Uncapped Yellows
BHR Ignition
Custom Intake Tray
Cobb AP
Greddy Profec E-01(Needs new boost sensor)
Greddy Oil Pan
Prosport Oil Sandwich Plate
Prosport EVO Boost Gauge
Prosport EVO AFR Gauge
Last edited by kma5783; 02-23-2014 at 04:35 PM.
#6
Updated the first post with the following:
If someone is serious about buying the main components of the turbo kit and does not wan't the supporting Mods we can work something out.
Will not separate:
Greddy Turbo Kit with Garrett GT3076R
Ceramic Coated Manifold, Downpipe, and Turbine Housing
Turbosmart Wastegate Actuator
Synapse DV
Synapse Boost Connect Hard Lines
Mazsport Intake
Custom 2.75" Piping from Turbo to Intake
Tial Silicone Couplers
Tial T-Bolt Clamps
Price: $6000
If the kit sells FIRST I will sell these components separately(Please do not message me or make offers on these components until the kit sells FIRST):
2 Uncapped Yellows
BHR Ignition
Custom Intake Tray
Cobb AP
Greddy Profec E-01(Needs new boost sensor)
Greddy Oil Pan
Prosport Oil Sandwich Plate
Prosport EVO Boost Gauge
Prosport EVO AFR Gauge
If someone is serious about buying the main components of the turbo kit and does not wan't the supporting Mods we can work something out.
Will not separate:
Greddy Turbo Kit with Garrett GT3076R
Ceramic Coated Manifold, Downpipe, and Turbine Housing
Turbosmart Wastegate Actuator
Synapse DV
Synapse Boost Connect Hard Lines
Mazsport Intake
Custom 2.75" Piping from Turbo to Intake
Tial Silicone Couplers
Tial T-Bolt Clamps
Price: $6000
If the kit sells FIRST I will sell these components separately(Please do not message me or make offers on these components until the kit sells FIRST):
2 Uncapped Yellows
BHR Ignition
Custom Intake Tray
Cobb AP
Greddy Profec E-01(Needs new boost sensor)
Greddy Oil Pan
Prosport Oil Sandwich Plate
Prosport EVO Boost Gauge
Prosport EVO AFR Gauge
#9
This is what I used specifically, but they have many options.
WireCare.com :: Your Cable Management SuperStore!
#22
I'm confident at around 10-12psi it would put out 325+whp.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
yurcivicsux
Series I Major Horsepower Upgrades
192
09-12-2017 10:54 PM
05rx8mazda
RX-8 Parts For Sale/Wanted
18
11-28-2015 09:42 AM