Hwk, use some caution with the next step, I've had success with windex as it contains ammonia and the ammonia will help remove the unwanted RTV. A microfiber cloth is your safest bet for cleaning. If you have any further issues feel free to contact me PM email or phone.

 

how would i get the corner attacted again?

 

Hwk, check your pm.

 

i got mine fixed!

 

VERY NICE! Loving the yellow!

 

Indeed.
Lebren, in my haste I never seated it properly and I have a slight gap in between the trim and the accent. I see everyone else's is seated flush.
So I need a new tube of silicone? Anything specific i'm looking for?

 

look at my picture. it has a little gap too

 

Ay and mine is bigger then that.

 

I truly think it's the way Mazda molded the bumpers. I've done some that fit flush and others that stick out a little bit. The first thing I did was add that chamfer on the top of the lens to prevent the gap but it doesn't help on some eights.

 

Hey Al, have you decided if you're going to reinstall your light? A small gap is okay as long as you can tolerate it, it's a tight fit. Your local automotive store should carry Clear RTV that will work.

 

I had a small gap like HWK which made me nervous every time I washed the car, so I just RTV'd all around the led for peace of mind.

 

Still debating on it. I did do a pretty sloppy install that night.
I will take a pic of the gap to show.
I'm sure water has gotten in there, but the LEDs are still working fine for now. I want to avoid them shorting out later on obviously.

 

i believe lebren uses a special coating behind the light to prevent corrosion..i have seen him personally apply it...im sure he will chime in

 

Love the light!

 

me too

 

assuming you can remove the light without damaging it or your bumper the best bet would be to clean all the RTV and tape. If you somehow damage the lens, drop me a PM

 

hey lebren!! just thougth i'd add some night pics that i've been promising for months i forgot to take one with the light off to show the stealth part, oh well!

 

lebren i have a question. after the body shop took my rear bumper off, they put on blue wire splice, and now the light doesnt turn on. should i go buy red ones?

 

i just ordered mine, im excited :]

 

ah, forgot about this thread, 2 more pics from me

 

installing smoked on my tit today... this project is leapfrogging over at least 8 others I have lined up for my car.

 

here's a night shot of mine from my POC iphone. Very simple install... very pleased

 

Thats terrible, make sure the red wire of the LED Accent Light is going to the red/black wire of the harness. Also make sure the black wire of LED accent light is going to the black wire of light harness.

Also, yeah the blue splices are made for larger wires; connection will be intermittent

 

woot cant wait for mine :]

 

Orders shipped on the 4th, you'll be one of the first to get yours mike being so close! Dont forget installs have their own page on www.lebren.com

I'm always available too, if you need help.