Yea it should be nice when it's done.

I got some more work done today, drivers side of the wire tuck is completely done.
Not much left to do on the passengers side.

Brake Calipers, Brackets, and Discs are all off and prepped for paint along with the heat shields.

Will be back at it tomorrow.

So I removed all the brake calipers to clean and paint them and I'm about to order ATE Super Blue to refill and bleed the brakes when I reinstall everything, I have a question though.

Is 1 Liter of Fluid enough to do the whole system? Or should I order 2?

Anyone?^^^^

I don't think it will be enough man, I used almost one full one when I did mine better safe than sorry.

Well I spoke with my rotary mechanic and said that it wont take more than one liter. If you are still concern buy 2 and I,ll make u a deal. I'll would appreciate if you do the same to mine since the 8 never had it done. I would of course pay for the can and labor. Let me know.

just get one man, if you really need another.... which I highly doubt you will, then we can order another lol

jose and glenn have done the change to blue dot, text them

Thanks man, I'll just order two to be safe.

Thanks, If I was just bleeding the brakes I would probably just order one, but the Calipers were removed so everything was flushed out.

I can do that, you just want your brakes bled?

I'll text them, but I'd rather order two to be safe and get it done, than order one and find out I need more and have to wait for another Liter to get here.

If you could get system flushed out that will be great.

2 it is

Yea no problem, We'll have to figure out when we can do it, I'm trying to get my car put back together so it will probably be a couple weeks before I can do it.

Yea I guess

Thanks man, sure I can wait. Just Let me know when you are available. PM me to set up a day how to reach you.

Ok, Sounds good.

Love all the progress you're making on her! Damn, she's looking hawt!!!

^nice to see Kuro following up :)

Im sure she is proud of what you are doing with her Kyle

I am! :D

Thanks, wait until you see it when it's all done.

Yup, Thanks

How's the build going? Did you get your manifold and the parts your were expecting?

Good, Got the manifold back and all the parts I ordered have come in.

Pulled the injectors last night, the P2 Injectors will be sent to KG Parts to be upgraded tomorrow.

Battery harness is all sleeved and back in the car.

I need to get some new studs for the manifold to turbine housing connection, I ordered two different sizes and because the turbo has to be spaced off the manifold neither will work, one is too short and the others are too long.

It's good to hear that is going well. :icon_tup:. Except the part where you need to get new studs.:uhh:

Progress is still being made...

Got the Airbox Tray cut out of aluminum just have to bring it down to be welded along with the canister setup.

Brakes are all re-installed, just have to get Chris back over here to help bleed them.

Got a bunch of wiring sleeved and organized, and relocated the Fuel Pump Resistor and MAP Sensor.

Ran the wires for the Battery under the car and temporarily connected power to everything to make sure there were no obvious problems and to be able to check the power source I used for the Gauges and Boost Controller.

Boost Controller and Gauges installed, also rewired the headunit/metra kit cause it was a tangled mess of wires.


Thanks for your help this weekend Chris.

Glad to see progress being made :)

Me too, I just want the car back together so I can drive it.

I almost fried my hand and burned your car to the ground... your welcome :lol:

:uhh:......:shocking:

:newbie:

:rofl: