Finally got it claybarred.
#12
Now with 25% more fluff..
Join Date: Apr 2008
Location: San Antonio, TX
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
#16
Eccentric Shafting
iTrader: (2)
Join Date: Nov 2006
Location: Cape Cod
Posts: 4,649
Likes: 0
Received 0 Likes
on
0 Posts
Looks so good you inspired me to recon my car after the long cold winter. Finish was still very smooth and did not need to clay though.
Here's my 4 hour process:
1. Wash & Dry
2. Griot's Garage Machine Polish 3 with PC and orange pad
3. Buff by hand
4. Poor Boy's EX-P polish/sealant with PC and polishing pad
5. Buff by hand
6. Natty's Paste Wax Blue by hand
7. Buff by hand
8. Clean RB muffler canisters and tips
9. Apply Back to Black
Here's my 4 hour process:
1. Wash & Dry
2. Griot's Garage Machine Polish 3 with PC and orange pad
3. Buff by hand
4. Poor Boy's EX-P polish/sealant with PC and polishing pad
5. Buff by hand
6. Natty's Paste Wax Blue by hand
7. Buff by hand
8. Clean RB muffler canisters and tips
9. Apply Back to Black
#18
well even though my car was all nice and shiny, the exhaust tips were definitely not! So i spent another couple hours today polishing them...by hand. I got the dremel out for the hardcore black buildup, but then I didn't have any more dremel pads so i had to go back to using a rag.... here are the results!
the white speckles are residual polish dots...they are wiped off now
the white speckles are residual polish dots...they are wiped off now
Thread
Thread Starter
Forum
Replies
Last Post
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
09-29-2015 05:05 PM