Few custom appearance mods w. pics, and half a#@ DIY's
#1
Few custom appearance mods w. pics, and half a#@ DIY's
Hey just wanted to let people check out some new things I worked on. I already had the evo-r shift cover in carbon and side covers in carbon, so I layed thin real carbon fiber over the rest of the console. You can get this stuff off ebay..its very thin but its real carbon fiber pre mounted with 3M backing. I cut it with really sharp heavy scissors, which let me get the curves cutout (total time about 1 hr) Cost about 35 dollars
Put in a led bar for the 3rd brake light, which really had to be done to complete the look of the back i think. Picked up a 6 inch white LED bar online, which fits PERFECTLY into the housing without any modifications. Just dabbed glue on the ends and wired it up to the factory wiring. Cost 8 bucks
Finally got my 4" tips welded on. Picked them up off ebay, theyre the 2.25 inlet 4 inch outlet, slanted cut tips made by Vertex i think. Kind of dark though. Cost 65 shipped, then 70 welded on.
Put in a led bar for the 3rd brake light, which really had to be done to complete the look of the back i think. Picked up a 6 inch white LED bar online, which fits PERFECTLY into the housing without any modifications. Just dabbed glue on the ends and wired it up to the factory wiring. Cost 8 bucks
Finally got my 4" tips welded on. Picked them up off ebay, theyre the 2.25 inlet 4 inch outlet, slanted cut tips made by Vertex i think. Kind of dark though. Cost 65 shipped, then 70 welded on.
#8
Registered User
Join Date: May 2007
Location: Jax, FL
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered the full dash kit in real Cf for mine. Thanks for posting pics of the center console side covers. I think I will pic them up too. Looks good. I like it "flashy"!
#9
Registered
Join Date: May 2006
Location: Chicago(Bucktown Area)
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Can you show a pic or two underneath you exhaust set up and a sound clip? Thanks!
Last edited by REV_ME_62; 02-06-2008 at 07:08 PM. Reason: Added "and a sound clip?"
#10
the tips dont change the sound..all the shop did was cut off the old ones and reattach the ones I bought so it looks about the same underneath.
As far as the LED strip, its not malfunctioning... it just stays VERY VERY dimly lit, barely noticable at all from behind, but just enough to give it a slight glow. Believe me, it doesnt look like your braking at all, it just gives the oval a tiny glow and looks great I think. I dont know, may just be the LED strip I bought...havnt bothered to change it though.
As far as the LED strip, its not malfunctioning... it just stays VERY VERY dimly lit, barely noticable at all from behind, but just enough to give it a slight glow. Believe me, it doesnt look like your braking at all, it just gives the oval a tiny glow and looks great I think. I dont know, may just be the LED strip I bought...havnt bothered to change it though.
#13
Vegas rx8!
Join Date: Mar 2007
Location: Las Vegas
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
post pics when u put the whole kit on please, im curious
#14
yeah real carbon is kinda tough to work with. I agree with NGO though, you gotta carry it on through out the rest of the center console all the way back.
Remember to ensure the weave pattern is the same direction as the first set you layed down.
Remember to ensure the weave pattern is the same direction as the first set you layed down.
#16
Registered User
Join Date: May 2007
Location: Jax, FL
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
fo sho look for a new thread soon.
How bout pics of it "dimly lit". Im still curiously interested.
I so wish the pieces that cover the silver went all the way to the back too. Seems silly that they don't but I keep scratchin the silver on accident more and more, so I plan on getting the covers any how, just wish they were longer. (That's what she said)
How bout pics of it "dimly lit". Im still curiously interested.
I so wish the pieces that cover the silver went all the way to the back too. Seems silly that they don't but I keep scratchin the silver on accident more and more, so I plan on getting the covers any how, just wish they were longer. (That's what she said)
Last edited by TRAVASS; 02-07-2008 at 06:05 PM.
#18
nope coated carbon fiber with clear gloss..cant tell the difference between if it is thick or not. I was very impressed actually, only problem is that it doesnt really curve over surfaces more than a little..i tried it on the ashtray and rest of the side silver part and it just wont curve that great. Might need to get a thinner piece. Ill get pics of the led strip up, the dimly lit thing i was reffering to is really DIMLY lit..you can barely see it at all.
#19
My Eye is watching you
Join Date: Sep 2007
Location: Greece
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
I think it looks great, but you should add CF to the rest of the console. I have done the CF thing to my interior and I like it very much. There are some pictures in this thread: https://www.rx8club.com/showthread.p...ght=carbon+pod
REgards
REgards
Thread
Thread Starter
Forum
Replies
Last Post
zoom44
Series I Do It Yourself Forum
74
09-23-2020 06:08 PM
MazdaPi
Series II Aftermarket Performance Modifications
4
10-29-2014 01:41 PM