Easy_E1

iTrader: (2)

Here ya go,,,
As you can see there is a cover over the oil pan now. And the oil pan is not a pan so much as a cover over the new aluminum housing design. And the oil filter is under the cover and in the front left corner of the engine underneath.

The oil pan pic is from the right side looking towards the left side front of the car is on the right side of the pic.

sosonic

Does the new oil pan hold more oil?

Easy_E1

iTrader: (2)

I have heard it has more capacity just don't have any figures on it. I do know the engine oil cooler is larger too. At least on this AT.

CERAMICSEAL

THANK YOU!!!!

Seal.

DOMINION

Hows the Oil pressure?

heyarnold69

iTrader: (1)

once i blow my motor ... i think ill swap in one from an 09 ... hrmmm i'd need the ecu too wouldnt i...

Easy_E1

iTrader: (2)

I don't think that would change. Just the size/capacity of the engine oiling sustem.
As in better cooling. One could only hope.

TheKDog

How much horsepower does this add?

Easy_E1

iTrader: (2)

Nothing. It's still rated at 212 for the 6 Port AT.

RCCAZ 1

Any word yet on why your car Dyno'd so low last weekend?

Easy_E1

iTrader: (2)

They have my car now and are checking it out. They are going to call Mazda Techline tomorrow. Another engine

RCCAZ 1

Hey Easy, I think that Mazda North America should 'hire' you as their new engine product tester. Basically, if their product can stand up to 6 months of "Easy" driving, it can stand up to ANYTHING

Just my .02. Good luck bro. Keep us in the loop.

I mean, what would the chances be of YET another motor? 'Cmon.

Easy_E1

iTrader: (2)

The tech said it did have one misfire in the log. Of the last 10 drive cycles. He also said he did a compression test on it, but I never heard the numbers. He said he was going to do another compression test on it.
He test drove it and had a bout of sluggishness on acceleration above 4000 rpm, but no CEL's.
I've never had a CEL in either RX-8 I've owned in three years. Makes me think the lights are burned out.
Why me?