RX8 - 20b swap / part II
#1
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
RX8 - 20b swap / part II
so.... my friends tell me when i want things done right, do it myself. so that's what i'll do. but don't start on a snowy day...
to be fair, i had a military contractor who works on mine sweepers to help me get things started!
to be fair, i had a military contractor who works on mine sweepers to help me get things started!
#6
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
problem is that when i hooked up the battery like this then turned on the ignition with the main computer attached, nothing showed up. no sound, display, nothing... any suggestions?
#14
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
btw, is patrick (i forgot his handle name) around? he's the one that used to buy rx8's and part them out as parts. i bought some harness from him but there's a big chunk that was cut away...
#15
Modulated Moderator
iTrader: (3)
He has been on...G3tR3DDY2GR3DDY i THINK
I'm going to have a look at my car..back in a couple of minutes
OK:
Separate feeds from the battery....there is also a plug that is in the same part of the harness that connects to the plug in the corner above the nuts..need a wiring dia to trace that one...
How are you running the stock trigger wheel setup so your dash and Tach work??
I'm going to have a look at my car..back in a couple of minutes
OK:
Separate feeds from the battery....there is also a plug that is in the same part of the harness that connects to the plug in the corner above the nuts..need a wiring dia to trace that one...
How are you running the stock trigger wheel setup so your dash and Tach work??
Last edited by dannobre; 02-05-2010 at 09:45 PM.
#16
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
just went out but my hood has about 1ft of snow on it. probably do it tomorrow after the snow passes.
this is promising. i thought the main comp was fried.
will post tomorrow.
i'm sandwiching the reluctor ring between the ac pulley & a/c compressor pulley. i made a bracket for the magnet sensor. that's just for the tach. i'm running distributer style CAS for the haltech. i have the florida guy with the blue rx8 with 20b to thank for this idea
this is promising. i thought the main comp was fried.
will post tomorrow.
i'm sandwiching the reluctor ring between the ac pulley & a/c compressor pulley. i made a bracket for the magnet sensor. that's just for the tach. i'm running distributer style CAS for the haltech. i have the florida guy with the blue rx8 with 20b to thank for this idea
#20
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
heyyy! nice to see you too. i was there for one year paying off all my loans haha. i took a fellowship position at my home program now, which means i'll be seeing winter for two more years.
#22
Modulated Moderator
iTrader: (3)
If you had the stock trigger wheel setup...and the MOP hooked up electrically it should work. I have a Haltech on my Renesis setup and that's what I did..I have a custom Hall effect sensor for the Haltech and the stock trigger wheel running the rest of the car. The wiring caused a few headaches...but it works good now
#23
Rob gonzalez
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Hi Stick, Good to see you back!! what kind of haltech ecu do have? E11 Platinin2000.
Rob
Rob
#24
Unregistered User
Thread Starter
Join Date: Apr 2006
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
hi rob! nice to see you too! i'm using e11 because i bought it long time ago. hey do you have the wiring harness diagram for the oem rx8 computer? i'm little lost on the electric wires.
#25
Asshole for hire
iTrader: (1)
Join Date: Jun 2006
Location: Colfontaine, Belgium
Posts: 3,214
Likes: 0
Received 3 Likes
on
3 Posts
Good to see you back in this after all the history.
If you havent gotten the wiring diagrams you need, send me an email address and i'll give em to you today. I have them in PDF and in HTML(along with the rest of the manuals)
If you havent gotten the wiring diagrams you need, send me an email address and i'll give em to you today. I have them in PDF and in HTML(along with the rest of the manuals)