13b rew swap in nyc
#1
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
13b rew swap in nyc
Hi, this thread is for a build im workin on with goopy performance to do a fd swap on my 8... i currently need help with how to get a manifold for this swap, if theres any out there so that we dont have to custom build one. i will also take any advise i can get as far as to make the swap any easier for us. thank you
#2
Registered
iTrader: (10)
An intake manifold? I know someone local here in Queens who is getting the swap done on his 8. It's being done by Jim at JPR Imports in NJ though. As fas as I know he is using the stock rew intake manifold and also having custom work done on the Renesis front cover so all his electronics remain intact. Where in NY are you from?
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
Last edited by GK1707; 02-21-2013 at 12:19 PM.
#5
Supercharged by Pettit
iTrader: (5)
An intake manifold? I know someone local here in Queens who is getting the swap done on his 8. It's being done by Jim at JPR Imports in NJ though. As fas as I know he is using the stock rew intake manifold and also having custom work done on the Renesis front cover so all his electronics remain intact. Where in NY are you from?
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
Who over in JPR is doing the swap?
#7
Registered
iTrader: (10)
It's Jim himself doing the swap and all the tuning (via Microtech). The guy who's getting it done isn't too active here on the forums but he's always at the Douglaston meets Thursday night. Motors in the car and swaps almost done. Half bridgeport and a 73mm Borg Warner single turbo. He's says it should be done by next month. I'm not too sure if he'd want me to post pics of his build online. I think i'll ask him first lol but its looking great so far.
#10
Uncontrollable drifter
Next time you write something, there's no reason to use a huge font! It will not make your subject more important, all it will do is **** people off. Now, did you do any research at all? There's quite a few threads now, I suggest you search...
#11
Supercharged by Pettit
iTrader: (5)
Unrelated but this is Jim's drag FD. Now enough of my threadjacking.. But I would recommend OP check out JPR since he's in NY and their somewhat local. Work is top notch.
Attachment 193089
Attachment 193089
#12
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
An intake manifold? I know someone local here in Queens who is getting the swap done on his 8. It's being done by Jim at JPR Imports in NJ though. As fas as I know he is using the stock rew intake manifold and also having custom work done on the Renesis front cover so all his electronics remain intact. Where in NY are you from?
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
EDIT: If you mean exhaust manifold. The stock one wont work since the twins won't fit in our engine bay. You'll need convert to single turbo.
#13
Registered
iTrader: (10)
I'm not too sure exactly, But my friend usually heads out on thursdays to go down and check out the build. I'll hit him up and ask when he's going again. If he's cool with it (which I'm sure he will be) Ill PM you his number. Swaps almost done, he said hopefully within the next few weeks he can get tuning finished.
Overall the turnover wasn't bad at all. He left the car there maybe early December so about 4 months-ish.
#15
redrx8rotary
Join Date: Apr 2010
Location: queens,nyc
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
It uses the stock computer then you use the interceptor and microtech everything works but you will have a ck eng light on that's all for the trans u will have modify the transmission tunnel a bit. Motor sits lil more towards the firewall. I got the whole swap for cheap so I wanted to get it done.
#18
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
so your saying i dont have to change the wiring on the engine? ill definitely try that thanx. also i want to know what engine mounts i can use or if i should fabricate some.. im also still waiting on an answer for the turbo manifold.. ill post pictures as soon as i got some engine pics.. my boy at goopy performance doin all the engine work i just need a good place to install and tune the engine but i dont want to tow the car all the way 2 jersey i think theres a shop in queens that specializes in rx7s.. i think its called T&R racing or something ima look it up
#19
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
JUST WHAT I NEED ANOTHER DOUCHE WHO HAS NOTHING BETTER TO DO! PS IF YOU DONT HAVE PRODUCTIVE COMMENTS THAT HELP ME WITH WHAT I POSTED, DONT EFFIN COMMENT! JUST CUZ THERE ARE OTHER POST ABOUT THIS SUBJECT IT DOESNT MEAN MY QUESTIONS ARE ANSWERED I HAVE SEARCHED EVERY WHERE AND THE ONLY THING I GET IS PICTURES OF THE BUILD AND PPL ADMIRING IT..
#20
Registered
iTrader: (10)
so your saying i dont have to change the wiring on the engine? ill definitely try that thanx. also i want to know what engine mounts i can use or if i should fabricate some.. im also still waiting on an answer for the turbo manifold.. ill post pictures as soon as i got some engine pics.. my boy at goopy performance doin all the engine work i just need a good place to install and tune the engine but i dont want to tow the car all the way 2 jersey i think theres a shop in queens that specializes in rx7s.. i think its called T&R racing or something ima look it up
Since your in Long Island I'd recommend SpeedTek out in Deer Park. Their work on FDs is unrivaled. I've seen a few of the Fds they've built in person and the power is just insane. If your unfamiliar with their work, look up Roan and his 9 second FD. Probably one of the most infamous FDs out here in Queens. They would definitely be able to point you in the right direction.
#21
No respecter of malarkey
iTrader: (25)
JUST WHAT I NEED ANOTHER DOUCHE WHO HAS NOTHING BETTER TO DO! PS IF YOU DONT HAVE PRODUCTIVE COMMENTS THAT HELP ME WITH WHAT I POSTED, DONT EFFIN COMMENT! JUST CUZ THERE ARE OTHER POST ABOUT THIS SUBJECT IT DOESNT MEAN MY QUESTIONS ARE ANSWERED I HAVE SEARCHED EVERY WHERE AND THE ONLY THING I GET IS PICTURES OF THE BUILD AND PPL ADMIRING IT..
You should seriously consider hormone therapy. I'm sure there are more if I wanted to spend more than the few minutes that I just did:
Rx-8 FD3S engine swap with 13B Re Intate, Street ported and a Greddy 25g Turbo kit. - RX8Club.com
https://www.rx8club.com/major-horsep...0/#post3971870
bon appetit ...
#22
Renesis out... REW in
iTrader: (3)
You should seriously consider hormone therapy. I'm sure there are more if I wanted to spend more than the few minutes that I just did:
Rx-8 FD3S engine swap with 13B Re Intate, Street ported and a Greddy 25g Turbo kit. - RX8Club.com
https://www.rx8club.com/major-horsep...0/#post3971870
bon appetit ...
Rx-8 FD3S engine swap with 13B Re Intate, Street ported and a Greddy 25g Turbo kit. - RX8Club.com
https://www.rx8club.com/major-horsep...0/#post3971870
bon appetit ...
Careful Team he'll want you the baby bird it to him next.
.
#23
Uncontrollable drifter
Fonky, did you actually use the damn search button? Did you read all the threads for 13b swaps or did you look at the first and last pages only? People who are serious about learning on how to do things actually research and contact other people who did complete swaps. I've had about 10 different guys contact me and I sent them complete info on how-to (mechanically&electrically), and even then, they didn't go through or finish it. You're new and have 4posts, and you can't find answers....?
#24
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Fonky, did you actually use the damn search button? Did you read all the threads for 13b swaps or did you look at the first and last pages only? People who are serious about learning on how to do things actually research and contact other people who did complete swaps. I've had about 10 different guys contact me and I sent them complete info on how-to (mechanically&electrically), and even then, they didn't go through or finish it. You're new and have 4posts, and you can't find answers....?
1. im only new to rx8club because i made a profile when my car was some wut good enough to post some pictures, unlike the 80% of damn near bone stock rx8 profiles on here!
2. 1 dont have many post because I DO MY RESEARCH and i have found the answer to all my other 99 thousand problems the rx8 has!
3. i did pm several ppl about this build and NO ANSWER!
4. if the subject seems repetitive to you than why the eff open the thread?
i didnt come to make here to make enemies, if you can help me with this build for all who actually are helping thank you, if you think its repetitive or you know the answer is sumwere, and feel i should find it on my own, then dont comment! simple
POSTING PICTURE SOON.. thank you
#25
Fonky_Rey
Thread Starter
Join Date: Nov 2012
Location: New York City
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Easiest way for the mounts would probably be to buy the subframe crossmember from rx8performance. And ehh... T&R's rep is a little iffy, their work is hit and miss depending on how they like you. There's a small rotary shop on Foch blvd. that does phenomenal work. Someone I know with an FD just got a really nice rebuild and port work from them. But their really small and independent. Plus the one guy who does all the builds and tuning doesn't speak much english.
Since your in Long Island I'd recommend SpeedTek out in Deer Park. Their work on FDs is unrivaled. I've seen a few of the Fds they've built in person and the power is just insane. If your unfamiliar with their work, look up Roan and his 9 second FD. Probably one of the most infamous FDs out here in Queens. They would definitely be able to point you in the right direction.
Since your in Long Island I'd recommend SpeedTek out in Deer Park. Their work on FDs is unrivaled. I've seen a few of the Fds they've built in person and the power is just insane. If your unfamiliar with their work, look up Roan and his 9 second FD. Probably one of the most infamous FDs out here in Queens. They would definitely be able to point you in the right direction.