Engine Rebuilds
#1
Engine Rebuilds
R.I.P. is happy to offer engine rebuild services to RX8 Club members.
Pricing is $2600 for a stock rebuild. Each motor will come with a 2 year/ 24000 mile warranty when you provided a good core and a qualified mazda repair shop or equivalant shop installs the motor. R.I.P. can and will do the removal and install if you are willing to ship your car. R.I.P. can help w/ transportation service if you require it. The removal/installation rate is $1000.
R.I.P. focuses on the highest quality in rebuilds. Each of these motors will receive new seals on the rotors. There are no within spec seals used, all are brand spanking newsky.
Here is a list of seals replaced on each motor:
Apex seals and springs
Side seals (hand clearanced) and springs
Oil scraper seals and springs
Oil Control Rings, O rings, and seals
Corner seals and springs
Thrust washers
oil pump chain
All coolant and oil O rings
If your core needs new rotors, housings, or bearings there will be an additional charge.
Porting services are also available for an additional $300.00
Please contact Brad at rip.it@att.net or (405)317-5095 for any additional information.
It is possible I have left out information so feel free to ask any questions in this forum and I will reply.
Thank you,
Brad
Pricing is $2600 for a stock rebuild. Each motor will come with a 2 year/ 24000 mile warranty when you provided a good core and a qualified mazda repair shop or equivalant shop installs the motor. R.I.P. can and will do the removal and install if you are willing to ship your car. R.I.P. can help w/ transportation service if you require it. The removal/installation rate is $1000.
R.I.P. focuses on the highest quality in rebuilds. Each of these motors will receive new seals on the rotors. There are no within spec seals used, all are brand spanking newsky.
Here is a list of seals replaced on each motor:
Apex seals and springs
Side seals (hand clearanced) and springs
Oil scraper seals and springs
Oil Control Rings, O rings, and seals
Corner seals and springs
Thrust washers
oil pump chain
All coolant and oil O rings
If your core needs new rotors, housings, or bearings there will be an additional charge.
Porting services are also available for an additional $300.00
Please contact Brad at rip.it@att.net or (405)317-5095 for any additional information.
It is possible I have left out information so feel free to ask any questions in this forum and I will reply.
Thank you,
Brad
#8
Guys and Gals,
I can build one of the cores on hand and ship it out. Once your core is received and inspected you would get a refund on the core.
Price of Rebuilt core $3500 through the end of the year. After tear down and inspection of your core a refund of $500 to $1000 would be provided back to you.
I can build one of the cores on hand and ship it out. Once your core is received and inspected you would get a refund on the core.
Price of Rebuilt core $3500 through the end of the year. After tear down and inspection of your core a refund of $500 to $1000 would be provided back to you.
#17
Those services are available but are over kill for street applications. If a customer wants it done I can provide those services, but those are more race oriented. I don't know your application you are looking for so I hope that answered your question.
Thread
Thread Starter
Forum
Replies
Last Post