Notices
Non-Rotary Swaps Engine Swap Forum

Frankenstein Fun Thread Let it all Rip!

Thread Tools
 
Rate Thread
 
Old Feb 6, 2015 | 02:34 PM
  #776  
firecran's Avatar
Renesis out... REW in
iTrader: (3)
 
Joined: Jan 2007
Posts: 1,526
Likes: 4
From: Melbourne, Fl
Originally Posted by 9krpmrx8
Of course now you are only interested in the small turbo Renny
Talk so much **** and now making excuses?

Your mouth wrote a check your turdbo renny can't cash!

.
Reply
Old Feb 6, 2015 | 02:40 PM
  #777  
WaitingforFI's Avatar
Add gas, add oil, repeat
iTrader: (1)
 
Joined: Oct 2004
Posts: 445
Likes: 28
From: ATL - PDK - RYY
Originally Posted by 9krpmrx8
Of course now you are only interested in the small turbo Renny, My car should be plenty though. And of course it would be video taped, I would not have it any other way. Having video of my car beating an LS swapped RX-8 would make my year. If I lose well, I lost to a LS swapped RX-8
Please tell me you have a GoPro or equivalent to record that.
Reply
Old Feb 6, 2015 | 02:49 PM
  #778  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
TX

Originally Posted by firecran
Talk so much **** and now making excuses?

Your mouth wrote a check your turdbo renny can't cash!

.

LSXREX was talking **** about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what.

As for talking ****, you talk a lot for a guy running a best of 12.7's on drag radials, All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me.

Last edited by 9krpmrx8; Feb 6, 2015 at 02:54 PM.
Reply
Old Feb 6, 2015 | 03:58 PM
  #779  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
Originally Posted by RIWWP
9k, make sure to get a lot of good video and pictures of all of his cut corners stuff that won't ever fail on him

Though I'd be tempted to lay a bet that some unforseen (and magically unrelated?) problem would prevent him from showing up. Kid got sick is a pretty good chance.
Let's make something clear. DONT talk about my child. I am game for **** talking but don't bring up kids again.

Originally Posted by 9krpmrx8
Of course now you are only interested in the small turbo Renny, My car should be plenty though. And of course it would be video taped, I would not have it any other way. Having video of my car beating an LS swapped RX-8 would make my year. If I lose well, I lost to a LS swapped RX-8
And that sounds like loser talk to me. Preparing yourself for something? I genuinely don't understand how you guys are dragging these cars with that hp and those short gears.
Reply
Old Feb 6, 2015 | 04:04 PM
  #780  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
Originally Posted by 9krpmrx8
LSXREX was talking **** about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what.

As for talking ****, you talk a lot for a guy running a best of 12.7's on drag radials, All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me.


I made myself pretty clear on my stance on rotaries. I wasn't challenging them all. Rotary's reputation isn't very good. Only a few last year at TX2K and they were barely quick enough to be third string camera cars. You made things personal talking so much **** op about the car. I'm looking to show you where a garage built LS swap (that works) falls in line in front of your roturd. Beating you would just be a bonus. I guess I can play the 9k card. "If I win then I beat the prettiest RX8 in the world. And if I lose well then I'll just come back with a 125 wet shot and radials."
Reply
Old Feb 6, 2015 | 04:23 PM
  #781  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
I wish you both would both shut up and build something for a change ...


.
Reply
Old Feb 6, 2015 | 04:28 PM
  #782  
CRO8TIA's Avatar
Registered
 
Joined: Nov 2009
Posts: 596
Likes: 0
From: Adriatic Paradise
Or get a room !
Reply
Old Feb 6, 2015 | 04:45 PM
  #783  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
nothing here is personal I assure you. I don't even know you, I just like getting a rise out of you (lot's of people actually). If you can't take the ribbing then I suggest the PurelyRX8 group on FB, they will tell you how great your RX-8 is all day long. As for who is faster, well that is to be determined.
Reply
Old Feb 6, 2015 | 04:55 PM
  #784  
firecran's Avatar
Renesis out... REW in
iTrader: (3)
 
Joined: Jan 2007
Posts: 1,526
Likes: 4
From: Melbourne, Fl
Originally Posted by 9krpmrx8
LSXREX was talking **** about rotaries in general, not just the Renesis. I will likely run times similar to your big turbo REW. That is my goal anyway, we shall see how the switch of ECU's and E85 goes. If not then I use the top mount kit I have and go EFR. Either way it will be on a renny no matter what.

As for talking ****, you talk a lot for a guy running a best of 12.7's on drag radials, All that HP and you are barely faster than a "turdbo renny" running a 60-1. Now that is amusing to me.


Big turbo REW....... That to funny!! You are so clueless..... Try again!
I ran a 12.7@115 on 12psi with no launch.
If you had a clue you would know there's plenty more in it.
As we can see by your post you don't!

Its not about me it's about you getting a LS in that big mouth.

.
Reply
Old Feb 6, 2015 | 05:06 PM
  #785  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
No launch, blah, blah, blah. Well let's see the plenty more then. You talk as much **** as anyone,

Last edited by 9krpmrx8; Feb 6, 2015 at 05:09 PM.
Reply
Old Feb 6, 2015 | 05:48 PM
  #786  
SiNfidelity's Avatar
Registered
 
Joined: Jul 2011
Posts: 460
Likes: 6
Originally Posted by TeamRX8
I wish you both would both shut up and build something for a change ... .
Yup yup
Reply
Old Feb 6, 2015 | 07:07 PM
  #787  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
I'm starting to think some people need to be excluded from accessing this particular section of the forum for constant negativity ... last I checked this section of the forum is for people who want to swap whatever the hell they desire into their car.

Is it a smart swap - who cares
will it be successful - who cares
is motor x better than a rotary - who cares
intellectual discussion and progress - this is what matters

If you can't fathom the idea that there are individuals out there who just dont care for the rotary engine, then this is not the section for you, its that simple. No one is forcing anyone to remain active in this section of the forum.

edit: to clarify, the bashing of swaps is fine and dandy, but we are getting awful close to personal attacks (at least in my opinion) and maybe even a hint of street racing ('rolling' on people). Now get some damn pics up
Reply
Old Feb 6, 2015 | 07:43 PM
  #788  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
I would say it isn't personal considering I haven't even met anyone here. Let's clear the air here with Mr. LSXREX. I don't hate people who own rotaries. Actually I wish more of my friends owned them so I could give them **** about it. I don't even hate the rotary that much. It's a very interested design and definately has its uses. Rotary engines will always be in the backseat when even compared with the worst piston motors. I'll pipe down about the rotary hatred everywhere except this thread. But that doesn't mean I don't want to roll 9k's ***. Only bc he is local and seems to be the head honcho when it comes to rotaries. Who knows maybe we will have a beer after. Lol? How about we put something on the line 9k? If you lose, you have to introduce EVERY piston swap thread with your love for piston goodness, blah blah blah. I'll write something up for ya. And if I lose? Well you can fill in the blank on that one.
Reply
Old Feb 6, 2015 | 08:19 PM
  #789  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 0
Likes: 2,703
Originally Posted by paimon.soror
I'm starting to think some people need to be excluded from accessing this particular section of the forum for constant negativity ... last I checked this section of the forum is for people who want to swap whatever the hell they desire into their car.

Is it a smart swap - who cares
will it be successful - who cares
is motor x better than a rotary - who cares
intellectual discussion and progress - this is what matters

If you can't fathom the idea that there are individuals out there who just dont care for the rotary engine, then this is not the section for you, its that simple. No one is forcing anyone to remain active in this section of the forum.
Paimon, that's what this thread is for, so that the trash talking doesn't clutter up the actual swap threads.
Go back and read the beginning of dannobre's idea.
It just seems some people's idea of "Fun" is not the same as others.
This is basically the swap trash talk thread.
Reply
Old Feb 6, 2015 | 08:50 PM
  #790  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
Keep in mind that although this is a "trash talk thread" it isn't void of forum rules.
Reply
Old Feb 6, 2015 | 09:02 PM
  #791  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
Originally Posted by LSXREX
I would say it isn't personal considering I haven't even met anyone here. Let's clear the air here with Mr. LSXREX. I don't hate people who own rotaries. Actually I wish more of my friends owned them so I could give them **** about it. I don't even hate the rotary that much. It's a very interested design and definately has its uses. Rotary engines will always be in the backseat when even compared with the worst piston motors. I'll pipe down about the rotary hatred everywhere except this thread. But that doesn't mean I don't want to roll 9k's ***. Only bc he is local and seems to be the head honcho when it comes to rotaries. Who knows maybe we will have a beer after. Lol? How about we put something on the line 9k? If you lose, you have to introduce EVERY piston swap thread with your love for piston goodness, blah blah blah. I'll write something up for ya. And if I lose? Well you can fill in the blank on that one.
Since you don't mind speaking your mind, then allow me the same ... Without a doubt you are the most insecure person on this forum. Grow some 'don't give an F what anyone else thinks' b@lls already ...
Reply
Old Feb 6, 2015 | 09:06 PM
  #792  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
Dammit man that was a try at an apology. Every time I get "hostile" people get their feelings hurt and I get banned. These rotary guys really take digs at their motors personally. I began to lose interest after the discussion turned to high 12 second times from turbo cars. I've been faster in a full weight, bolt on, f boat on street tires.

Last edited by LSXREX; Feb 6, 2015 at 09:12 PM.
Reply
Old Feb 6, 2015 | 09:15 PM
  #793  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,788
Likes: 462
From: San Antonio, Texas
Personally I think this thread is a great idea. And I don't hate swaps. I think kickerfox's is hilarious. The VR6 one might just take the cake though, we shall see. But if either get finished properly I will be the first to give props. I'm not holding my breath though.


Oh and rolling an LS swap RX-8 would be wonderful. I hope I get to try. If I fail I will catch a ton of **** from my rotary hating friends.

Last edited by 9krpmrx8; Feb 6, 2015 at 09:19 PM.
Reply
Old Feb 6, 2015 | 09:32 PM
  #794  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
I'm definately down to run 9k. I'm in Austin. I gotta do a shakedown T&T night though, I seriously can't keep this ****** straight. The 60' is gonna be minutes
Reply
Old Feb 6, 2015 | 09:46 PM
  #795  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
Why not try just letting it go for a change? You don't gave to reply/apologize/respond to every single freaking post ....
Reply
Old Feb 6, 2015 | 09:53 PM
  #796  
LSXREX's Avatar
Banned
 
Joined: Nov 2014
Posts: 350
Likes: 0
speak for yourself. I'm over it.

Last edited by LSXREX; Feb 6, 2015 at 11:19 PM.
Reply
Old Feb 6, 2015 | 09:59 PM
  #797  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,140
.........
Reply
Old Feb 7, 2015 | 12:40 PM
  #798  
firecran's Avatar
Renesis out... REW in
iTrader: (3)
 
Joined: Jan 2007
Posts: 1,526
Likes: 4
From: Melbourne, Fl
Originally Posted by 9krpmrx8
No launch, blah, blah, blah. Well let's see the plenty more then. You talk as much **** as anyone,
Educate yourself, then MAYBE you'll comprehend.

Oh wait your the same guy that sent off for a rebuild because you werent comfortable rebuilding a rotary

...mod edit


.
Reply
Old Feb 7, 2015 | 01:47 PM
  #799  
Kane's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 44
From: PCB
Let's keep it civil folks.

Trash talk about a car/build/etc is fine; not about a person. This is the last warning before I start moderating this thread with a heavy hand.
Reply
Old Feb 7, 2015 | 01:56 PM
  #800  
RIWWP's Avatar
Registered
iTrader: (2)
 
Joined: Oct 2007
Posts: 16,684
Likes: 267
From: Pacific Northwest
Originally Posted by LSXREX
Let's make something clear. DONT talk about my child. I am game for **** talking but don't bring up kids again.
To be clear, I didn't. I just said it was a probable excuse that you might use to avoid showing up to the race. Doesn't have to be true! (would be better if it wasn't, I wouldn't wish sickness on any kid)
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 01:41 AM.