Hell nice project and all but whats the point when you can't get that power transferred to the wheels in a controlled and synchronized manner...
|
^project is far from finished. some more work and it will be not only powerful but controlled as well
|
.......hopefully.
|
Originally Posted by j8635621
(Post 3534778)
.......hopefully.
295/45/18 10.5 w/35 offset...will stick out 1 inch and is 1.5 taller then stock 295/45/18 11.0 w/30 offset...will stick out 1.5 inches and is 1.5 taller So with 11 inches of tread on the ground I hope I'll be able to pick up some traction...plus taller tire helps as well. But as far as putting down the hp...actually...if you watch the first video..is sounds like shit...but I to a take off from a roll of about 10 and even though I'm spinning a little I shoot off pretty quick. The road is a back road and it's not like it's a clean road plus it was only like 60 degree's out that day. So if I up to a 11 inches and use a set of nitto tires. I should be able to pick up full traction. I'm currently running 265/35/18 |
11 inch wheel with a 30-40 offset with a 315/35 and you will still probably need a roll/pull if you lower at all.
|
he doesn't want a shorter tire. Those are gonna stick out so far past the fender it won't be funny.
|
Originally Posted by Fate710
(Post 3535431)
11 inch wheel with a 30-40 offset with a 315/35 and you will still probably need a roll/pull if you lower at all.
Oh car isn't being lowered...with the setup...my motor is actually maybe a 1/2 lower then the rest of the car..so the car is being raised. I did have it lowered and now it's getting raised to about 3 or 4 fingers between the tire and fender well. I like the look of sitting low..but around here with these rough roads...low is outta the question. I'm redoing the suspension. From what math estimates I have made and I'm going with 450 lbs shocks in the front and 305 in the rear. I currently have zero wheel hop with my current set up. But I can also feel the ass end bottom out between the shift from first to second. If it wasn't for that happening I think the car would hold traction with these tires...it's just that bottom out and then it's sideways lol. But hell......I'm still yet to fine tune this engine. I still need a bigger fuel pump...I can get on it in first and then second...but by the time you hit third its dieing out do to the lack of fuel. |
Originally Posted by j8635621
(Post 3535520)
he doesn't want a shorter tire. Those are gonna stick out so far past the fender it won't be funny.
A 315/35 on a 11" wide wheel with 32mm-40mm offset would fit with a roll and pull. People are running 10.5" +45 with 275s with no roll/pull. You could run that same 10.5" moved 10mm out and stuff a 315 with a roll/pull. |
Doubtful but please prove me wrong.
|
Provide me the tires/wheels and I will. Unless you have been under the rx8 and have test fitted aggressive wheels/tires, please shut the fuck up
|
Lol is all I will say.
|
Originally Posted by Fate710
(Post 3536256)
A 315/35 on a 11" wide wheel with 32mm-40mm offset would fit with a roll and pull.
People are running 10.5" +45 with 275s with no roll/pull. You could run that same 10.5" moved 10mm out and stuff a 315 with a roll/pull. But anyways if I'm going to run a 295 that is 1.5 inches taller without a roll or pull... I'd hope you can get the 315 in there. |
i just wanted to let everyone know things been going good...just been really busy...But anyways things should start coming along with my car in the next couple of weeks. I'm taking a new job....I start on monday and i'll be making almost twice as much...but it will be 50 to 60 hours a week. So I'll be extremely busy...
Anyways on to another note. Teagan was born today at 8:33 a.m. she is 22 inches and healthy as can be. Cries very little seems to be pretty content and cool. But I plan to hopefully with this new job in a month have the car build and finished on the road and hitting the track. |
congrats on the newborn
|
:scratchhe :scratchhe :scratchhe
|
Congtratulations on the new addition (not the car)!
|
congrats!
|
thanks guys.
|
Traction?
Not without drag slicks.... You really put the "8" in RX-8! |
Originally Posted by Rote8
(Post 3701746)
You really put the "8" in RX-8!
|
Originally Posted by Rote8
(Post 3701746)
Traction?
Not without drag slicks.... You really put the "8" in RX-8! Think about it...look it up on the net...my tires are a lot bigger then the Vet tires...when I had the tires put on the rim they asked what truck I was putting them on cause they are so damn tall. I'll actually post some pictures and video of the car this weekend when I actually have time to just drive and video it. But all in all I love the way the car feels with the V8. A couple of the guys with the LS1's say there isn't any traction or this or that but that's cause they haven't added the tread. When your talking a tire that is 5.84 inches taller then stock and a tire that is 1.75 inches wider your talking some serious change in grip and gear ratio. A 5.84 inch taller tire is good for like say 1200 rpm... IDK I'm just throwing numbers...all I know is the car is insanely quick and it handles great...has a awesome feel and sound. It's really what the RX8 should have. Once you go V8 you'll never go back lol |
God I hate that you did this to an 8. I mean, to each his own but this just bugs the hell out of me. :(
|
Originally Posted by 9krpmrx8
(Post 3703385)
God I hate that you did this to an 8. I mean, to each his own but this just bugs the hell out of me. :(
I'll tell ya what...you hate it...but how about you come down sometime and hop into the passenger seat...your heart will be pounding and you'll have a smile ear to ear. One ride will change everything. I thought boosting 15psi and having 400 whp was fun and exciting......try having 500 but having torque as well threw the whole curve. |
It just stops here?
|
It was sold, then resold, then hopefully pushed off a cliff. This has to be the worst swapped RX-8 ever.
|
All times are GMT -5. The time now is 09:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands