I need help getting a wiring diagram or helping fixing a wiring harness that is the dashboard wiring harness, the part number of the harness I have is FE97-67-030C it’s from a 2007 Automatic GT. The harness has been damaged and I have a wiring diagram however I am struggling to read the diagram. The connectors that I have located and have found in the wiring section of a workshop manual don’t have matching wire colors so idk what I’m doing wrong if I could get help reading the diagrams or identifying a few of the connectors to help that would be amazing that way I could look through the manual and try to see if I could decode the manual

 

Or if anyone knows where I could buy a replacement harness for cheap that would also be good

 

The electrical diagram that is usually floating around is for a 2004... so other than general stuff you need to get the correct 2007 diagram. If you have a local dealer they can print it off Mazda Tech site...

 

^^it was actually an early release in 2003 and not fully correct either.
.

 

Okay thank you I didn’t even think that it could be the wrong manual but you might be right I’ll look around or get a 2007 wiring diagram manual and see how that goes, thanks for the help

 

There are salvage parts sites that might be worth checking.

 

Okay I will look into salvage part websites to try and find what I’m looking for

but would the diagram matter if it was an 04 or 07 diagram? Because I think the harness also changes based on the features of the car, like if it has the navigation package or not just for an example or should an 07 wiring diagram manual cover all of that?

 

Most of the base harnesses are the same for all models in that year... the wires for all tend to be there.

The biggest difference is between the 2004 and 2007 is the way the keyless entry.and immobilizer work

The 2007 wiring manual will have what you need