Notices
New Member Forum A place for new members to get their feet wet

Throttle position issue

Thread Tools
 
Rate Thread
 
Old Mar 2, 2017 | 02:43 PM
  #1  
trytoslide's Avatar
Thread Starter
Registered
 
Joined: Nov 2015
Posts: 3
Likes: 0
Throttle position issue

Hello all, have a question about my accessport. When I accelerate to WOT it is showing the the throttle is only at 67%. I've tried in 2nd, 3rd, and 4th gear. I've held the pedal to the floor for 10-15 seconds and no change. Is this a normal reading or has anyone else experienced this? Car is an 04' 6 speed. I've had the Mazdamaniac calibration done. Engine runs fine, was just curious as to why the TPS didn't show 100% when the pedal was fully pressed. Thanks in advance
Reply
Old Mar 2, 2017 | 03:16 PM
  #2  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,720
Likes: 344
From: Smallville
That's not a %... that is a normal value
Reply
Old Mar 2, 2017 | 03:30 PM
  #3  
trytoslide's Avatar
Thread Starter
Registered
 
Joined: Nov 2015
Posts: 3
Likes: 0
Originally Posted by dannobre
That's not a %... that is a normal value
Ok, so would that be a normal reading then? Like I mentioned the car runs fine, it just seemed odd to me. The accelerator pedal reading itself goes to 99 when it's floored. I just assumed they would be close to identical
Reply
Old Mar 2, 2017 | 03:33 PM
  #4  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,720
Likes: 344
From: Smallville
Nope...It reads 67 at WOT
Reply
Old Mar 2, 2017 | 03:39 PM
  #5  
trytoslide's Avatar
Thread Starter
Registered
 
Joined: Nov 2015
Posts: 3
Likes: 0
Originally Posted by dannobre
Nope...It reads 67 at WOT
Ahh I gotcha, I was concerned I might've had a problem going on with the throttle body or electronics. Thanks for the info friend.
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:01 AM.