Notices
New Member Forum A place for new members to get their feet wet

Overheating at idle(kinda) and difficult cold starts

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-30-2021, 03:55 PM
  #51  
Registered
 
apex1's Avatar
 
Join Date: Jan 2020
Posts: 231
Received 26 Likes on 23 Posts
Its tough, these cars fall quickly into parts value without a sound engine. Mileage is pretty high. Even with a fresh motor, maybe you could sell for 6-8K. As is 2k max maybe. Only one way to find out for sure, good luck.
Old 07-01-2021, 06:15 AM
  #52  
Registered
 
Stefce's Avatar
 
Join Date: Feb 2021
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Updated to oem fans with spal fans

I pulled the oem fan shroud and put 2 new spal fans 12"
VA10-AP50 / C-61AWorks much betterReason to get gere it was over heating..the fan under the airbox wasnt spinning and i checked it got 12v and wast spinning..when connected directly to 12v it works ..but on the car was working and sometimes it stopped..when needed of course..but i was assuming bad fan since it works and stops..spals worked fine and after a while the one under the airbox also stops..it turns out harness has bad ground for the 2nd fan and it stops from time to time..gave it a proper ground and works fine..long way around at least but got performance fans on the way..solving it
btw spal fans can be more flush if the shroud is cut flat and not installed on top of oem curve in the shroud of the oem fans

Cut the oem at base of the brackets that hold them and just used 4 long screws to bolt the new ones through the plastic

New look and functionality
Old 07-01-2021, 11:28 PM
  #53  
Registered
Thread Starter
 
frastydragon's Avatar
 
Join Date: Jun 2021
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
IT STARTED RIGHT UP and i drove it around. The temp stayed around 98c. I dumped a bottle of stop leaks in.
It smoked a little bit on startup but I think it was the coolant from yesterday that was left in the tail pipe...
I have it listed for 3k yep.

Last edited by frastydragon; 07-02-2021 at 02:20 AM.
Old 07-02-2021, 08:05 AM
  #54  
Registered
 
CaymanRotary's Avatar
 
Join Date: Sep 2017
Location: Cayman Islands
Posts: 1,912
Received 286 Likes on 261 Posts
Originally Posted by frastydragon
IT STARTED RIGHT UP and i drove it around. The temp stayed around 98c. I dumped a bottle of stop leaks in.
It smoked a little bit on startup but I think it was the coolant from yesterday that was left in the tail pipe...
I have it listed for 3k yep.
It will definitely help you sell it of there are no coolant jacket leaks. Good stuff and good luck.
Old 07-02-2021, 12:53 PM
  #55  
Registered
 
apex1's Avatar
 
Join Date: Jan 2020
Posts: 231
Received 26 Likes on 23 Posts
Its a good project for someone with the skills and resources.

Good Luck
Old 07-11-2021, 10:44 PM
  #56  
Registered
Thread Starter
 
frastydragon's Avatar
 
Join Date: Jun 2021
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
I found a good used remanufactured engine for 350$
the dude said he was bogging/misfiring at 5-7k so he said apex were dead but he swapped another engine on and the same thing was happening. So I bet he had a clogged cat and thought it was apex seals going out. Anyways I bought it and dropped it in. Spent three days on the swap and tonight it started up almost instantly. I am still gonna sell it tho. I drove it around but there is a small jerk at 4-5 sometimes when accelerating.
Old 07-11-2021, 10:46 PM
  #57  
Registered
Thread Starter
 
frastydragon's Avatar
 
Join Date: Jun 2021
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts


Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
frastydragon
New Member Forum
1
06-27-2021 09:07 PM
Vexation241
New Member Forum
38
06-27-2014 05:05 PM
jamesf
Series I Trouble Shooting
14
10-28-2012 03:32 PM
Riaan Rotary
Series I Trouble Shooting
10
08-02-2010 07:12 AM
ddub
Series I Trouble Shooting
18
09-02-2008 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Overheating at idle(kinda) and difficult cold starts



All times are GMT -5. The time now is 06:22 PM.