I can't seem to post anywhere else even though I've been a member for a while now...

So firstly, hello everyone!

Secondly,

I am trying to fit d585 coils but the first "kit" I bought just had the coils. Spoke to the seller who sent me the conversion harness for the 3 to 4 pin. He also said that all I would need to fit the d585 to the oem bracket were four bolts/nuts which he sent. I can't figure out HOW this is supposed to work!

If anyone has any idea how I am supposed to do this, I'm all ears.

Apologies this is in the wrong place, I can't post anywhere else!




Old oem bracket with most coils removed



New d585 and nuts/bolts

 

Not really a kit.... you need the plug wires and the harness adapter to make them work

You can bolt all the coils together and zip tie them onto the bracket....but not the best idea to have them bouncing around

Usually the kits also contain a bracket to hold the coils to the OEM plate

 

Bennett Built sells their mounting bracket separately here.

https://www.bennettbuiltperformance....unting-bracket

Or make one yourself if you have the resources.