Whats everyone's "Mod's before summer" plan?
03-24-2008, 08:09 PM
#27
racing beat radiator and oil screens
replace the fog light holder (hit by something on the road)
replace one of the heated seats lights (went out some time ago)
finally put in my audio video box
finally connect my bluetooth car kit
put the xbox/carpc in the trunk
get the touch up paint out and put a couple strokes on the doors and what not
wash, clay bar, wax
spark plugs
coils
thinking about looking into the seafoam stuff
replace the fog light holder (hit by something on the road)
replace one of the heated seats lights (went out some time ago)
finally put in my audio video box
finally connect my bluetooth car kit
put the xbox/carpc in the trunk
get the touch up paint out and put a couple strokes on the doors and what not
wash, clay bar, wax
spark plugs
coils
thinking about looking into the seafoam stuff
03-25-2008, 07:24 AM
#31
jersey fresh
Thread Starter
Join Date: Dec 2005
Location: Boston, MA
Posts: 3,688
Likes: 0
Received 0 Likes
on
0 Posts
oh, anyone know a good site for lugnuts? I have black now, but they're just cheap black ones, I either want mugen black ones or if I can find them cheap titanium ones to match my exhaust tip.
03-25-2008, 10:21 AM
#32
Utopia Taco Bell
Touch up paint on the hood and front air dam.
Clay bar, high speed polish, and wax.
Install S-Techs
Install Bazooka BTA10100
Install interior ambient lighting to make the headliner glow
Clay bar, high speed polish, and wax.
Install S-Techs
Install Bazooka BTA10100
Install interior ambient lighting to make the headliner glow
03-25-2008, 10:48 AM
#33
doin' the bull dance
Join Date: Mar 2006
Location: Quahog, RI
Posts: 3,174
Likes: 0
Received 0 Likes
on
0 Posts
No, but I seem to recall a post a long time ago by Expo w/a link to a lug site.
03-26-2008, 07:03 PM
#34
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
http://www.cardomain.com/id/kleptohomicidal
Big ***** Puddle Lights
Carbing Rear Lower Aarm Tie Bar (JDM WHITE) (to be installed soon)
Espelir ESG Lowering Springs (JDM)
Intake Bumper Air Duct
Junction Style Shift **** (JDM) (for shows only)
KD IV Burnout Lip Kit
LEDs (Exterior & Interior)
Mazda Clear Corners (JDM )
Mazda Rotary Front & Rear Accents
MAZDASPEED Shift **** (JDM)
Perforated Black Leather w/White Stitching Shift Boot
Pettit RX-8 Rotar shaped CF Radio ****
Racing Beat Oil Cooler Screens
Rotary Extreme Intake RAM
RX-8 B-Pillars
Xtreme X8 Eye Lids
Zeta Arm Rest & Console Knee Cushion Pad
Big ***** Puddle Lights
Carbing Rear Lower Aarm Tie Bar (JDM WHITE) (to be installed soon)
Espelir ESG Lowering Springs (JDM)
Intake Bumper Air Duct
Junction Style Shift **** (JDM) (for shows only)
KD IV Burnout Lip Kit
LEDs (Exterior & Interior)
Mazda Clear Corners (JDM )
Mazda Rotary Front & Rear Accents
MAZDASPEED Shift **** (JDM)
Perforated Black Leather w/White Stitching Shift Boot
Pettit RX-8 Rotar shaped CF Radio ****
Racing Beat Oil Cooler Screens
Rotary Extreme Intake RAM
RX-8 B-Pillars
Xtreme X8 Eye Lids
Zeta Arm Rest & Console Knee Cushion Pad
dont buy a pettit radio ****...i may have one for you for free...
i'll take a look and get back to you!!
03-26-2008, 07:05 PM
#35
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
well...i really dont have a whole lot to get........
coming in already are my rims...
Volks GTFs in GOLD....the top secret edition...which are matt-diamond cut
of course, i need to get new rubber....since im going staggered...
and im thinking about changing out the hood...i never did like the fitment of that seibon KS cf hood....i may go back to oem, or get something new...
coming in already are my rims...
Volks GTFs in GOLD....the top secret edition...which are matt-diamond cut
of course, i need to get new rubber....since im going staggered...
and im thinking about changing out the hood...i never did like the fitment of that seibon KS cf hood....i may go back to oem, or get something new...
03-26-2008, 07:56 PM
#36
the bukkake master!
pat those are all the mods jeff has on the car now i guess he didnt read the title right. i dont have a pettit radio **** though
and you better not get the veilside hood!!!! 
and you better not get the veilside hood!!!!
03-26-2008, 08:14 PM
#37
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
jeff has all that stuff already?
i'll give ya a **** if i have one...
and dont worry, im not gonna go veilside!!
been there, did that...
03-26-2008, 09:48 PM
#40
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
03-27-2008, 09:09 AM
#43
the bukkake master!
03-27-2008, 10:40 AM
#44
jersey fresh
Thread Starter
Join Date: Dec 2005
Location: Boston, MA
Posts: 3,688
Likes: 0
Received 0 Likes
on
0 Posts
another so called MOD i'm searching right now, car cleaners. I bought a cheap OEM rear bumper already painted for $75, but it has scratches . I'm shopping around now for which polishers to use to help bring this paint back to life instead of just paying to get it done. So far I'm thinking I might actually try to sand it (the needed spots only), touch up paint, then fine sand, polish, wax, and seal. I started last night by clay barring it in my basement and using a fine fine polish, then viewed it under a lamp to see how much work I have to do.
I was also thinking about buying two of the cheap fake mazdaspeed replica rear ends and cutting them up. I'm trying to design a single exhaust rear bumper on my autocad (my exhaust is the HKS hi-power single), and i think i maybe able to do it using two of the fakes and fabbing something up, then letting a pro paint it. Of course the main concern is having it look OEM, but if it's designed correctly (and built correctly) I believe I can pull it off.
I was also thinking about buying two of the cheap fake mazdaspeed replica rear ends and cutting them up. I'm trying to design a single exhaust rear bumper on my autocad (my exhaust is the HKS hi-power single), and i think i maybe able to do it using two of the fakes and fabbing something up, then letting a pro paint it. Of course the main concern is having it look OEM, but if it's designed correctly (and built correctly) I believe I can pull it off.
Last edited by dillsrotary; 03-27-2008 at 10:43 AM.
03-27-2008, 02:39 PM
#46
jersey fresh
Thread Starter
Join Date: Dec 2005
Location: Boston, MA
Posts: 3,688
Likes: 0
Received 0 Likes
on
0 Posts
03-27-2008, 02:43 PM
#47
Administrator
iTrader: (7)
I just ordered the most expensive mod I've ever bought for my car. 
Stay tuned!
Stay tuned!
03-27-2008, 03:01 PM
#48
the bukkake master!
03-27-2008, 03:13 PM
#50
B.I.G
iTrader: (4)
Join Date: Aug 2007
Location: AT---EIL
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
MSP CAI
Sr motorsport 9lb flywheel.
sr power pulleys
greddy cat back
soon to come ignition solution.. im starting to think i wont get it until summers here. anwyays
runnin royal purple 5w-30 in engine
redline 75-95 i tihnk redline lightweight shockproff oil in transmission and diferential. made a big difference..
oh BTW im dynoein at 95Hp 35 lbs of torque =D
jp boutt he specs hah
Sr motorsport 9lb flywheel.
sr power pulleys
greddy cat back
soon to come ignition solution.. im starting to think i wont get it until summers here. anwyays
runnin royal purple 5w-30 in engine
redline 75-95 i tihnk redline lightweight shockproff oil in transmission and diferential. made a big difference..
oh BTW im dynoein at 95Hp 35 lbs of torque =D
jp boutt he specs hah