Whats everyone's "Mod's before summer" plan?
Wow thats really sweet. Too expensive to justify though, cause I'm talking about curb rash on stock rims. Impressive though...
racing beat radiator and oil screens
replace the fog light holder (hit by something on the road)
replace one of the heated seats lights (went out some time ago)
finally put in my audio video box
finally connect my bluetooth car kit
put the xbox/carpc in the trunk
get the touch up paint out and put a couple strokes on the doors and what not
wash, clay bar, wax
spark plugs
coils
thinking about looking into the seafoam stuff
replace the fog light holder (hit by something on the road)
replace one of the heated seats lights (went out some time ago)
finally put in my audio video box
finally connect my bluetooth car kit
put the xbox/carpc in the trunk
get the touch up paint out and put a couple strokes on the doors and what not
wash, clay bar, wax
spark plugs
coils
thinking about looking into the seafoam stuff
wankel? what's that?
iTrader: (4)
Joined: Jan 2008
Posts: 370
Likes: 0
From: San Salvador, El Salvador
Thread Starter
jersey fresh
Joined: Dec 2005
Posts: 3,688
Likes: 0
From: Boston, MA
oh, anyone know a good site for lugnuts? I have black now, but they're just cheap black ones, I either want mugen black ones or if I can find them cheap titanium ones to match my exhaust tip.
doin' the bull dance
Joined: Mar 2006
Posts: 3,174
Likes: 2
From: Quahog, RI
No, but I seem to recall a post a long time ago by Expo w/a link to a lug site.
Pettit fangurl <3
Joined: Mar 2005
Posts: 5,386
Likes: 0
From: Aston, PA
http://www.cardomain.com/id/kleptohomicidal
Big ***** Puddle Lights
Carbing Rear Lower Aarm Tie Bar (JDM WHITE) (to be installed soon)
Espelir ESG Lowering Springs (JDM)
Intake Bumper Air Duct
Junction Style Shift **** (JDM) (for shows only)
KD IV Burnout Lip Kit
LEDs (Exterior & Interior)
Mazda Clear Corners (JDM )
Mazda Rotary Front & Rear Accents
MAZDASPEED Shift **** (JDM)
Perforated Black Leather w/White Stitching Shift Boot
Pettit RX-8 Rotar shaped CF Radio ****
Racing Beat Oil Cooler Screens
Rotary Extreme Intake RAM
RX-8 B-Pillars
Xtreme X8 Eye Lids
Zeta Arm Rest & Console Knee Cushion Pad
Big ***** Puddle Lights
Carbing Rear Lower Aarm Tie Bar (JDM WHITE) (to be installed soon)
Espelir ESG Lowering Springs (JDM)
Intake Bumper Air Duct
Junction Style Shift **** (JDM) (for shows only)
KD IV Burnout Lip Kit
LEDs (Exterior & Interior)
Mazda Clear Corners (JDM )
Mazda Rotary Front & Rear Accents
MAZDASPEED Shift **** (JDM)
Perforated Black Leather w/White Stitching Shift Boot
Pettit RX-8 Rotar shaped CF Radio ****
Racing Beat Oil Cooler Screens
Rotary Extreme Intake RAM
RX-8 B-Pillars
Xtreme X8 Eye Lids
Zeta Arm Rest & Console Knee Cushion Pad
dont buy a pettit radio ****...i may have one for you for free...
i'll take a look and get back to you!!
Pettit fangurl <3
Joined: Mar 2005
Posts: 5,386
Likes: 0
From: Aston, PA
well...i really dont have a whole lot to get........
coming in already are my rims...
Volks GTFs in GOLD....the top secret edition...which are matt-diamond cut
of course, i need to get new rubber....since im going staggered...
and im thinking about changing out the hood...i never did like the fitment of that seibon KS cf hood....i may go back to oem, or get something new...
coming in already are my rims...
Volks GTFs in GOLD....the top secret edition...which are matt-diamond cut
of course, i need to get new rubber....since im going staggered...
and im thinking about changing out the hood...i never did like the fitment of that seibon KS cf hood....i may go back to oem, or get something new...
and you better not get the veilside hood!!!! 
Pettit fangurl <3
Joined: Mar 2005
Posts: 5,386
Likes: 0
From: Aston, PA
jeff has all that stuff already?
i'll give ya a **** if i have one...
and dont worry, im not gonna go veilside!!
been there, did that...
Pettit fangurl <3
Joined: Mar 2005
Posts: 5,386
Likes: 0
From: Aston, PA
the bukkake master!
Joined: Apr 2005
Posts: 1,972
Likes: 1
From: Staten Island, NY
Thread Starter
jersey fresh
Joined: Dec 2005
Posts: 3,688
Likes: 0
From: Boston, MA
another so called MOD i'm searching right now, car cleaners. I bought a cheap OEM rear bumper already painted for $75, but it has scratches . I'm shopping around now for which polishers to use to help bring this paint back to life instead of just paying to get it done. So far I'm thinking I might actually try to sand it (the needed spots only), touch up paint, then fine sand, polish, wax, and seal. I started last night by clay barring it in my basement and using a fine fine polish, then viewed it under a lamp to see how much work I have to do.
I was also thinking about buying two of the cheap fake mazdaspeed replica rear ends and cutting them up. I'm trying to design a single exhaust rear bumper on my autocad (my exhaust is the HKS hi-power single), and i think i maybe able to do it using two of the fakes and fabbing something up, then letting a pro paint it. Of course the main concern is having it look OEM, but if it's designed correctly (and built correctly) I believe I can pull it off.
I was also thinking about buying two of the cheap fake mazdaspeed replica rear ends and cutting them up. I'm trying to design a single exhaust rear bumper on my autocad (my exhaust is the HKS hi-power single), and i think i maybe able to do it using two of the fakes and fabbing something up, then letting a pro paint it. Of course the main concern is having it look OEM, but if it's designed correctly (and built correctly) I believe I can pull it off.
Last edited by dillsrotary; Mar 27, 2008 at 10:43 AM.
Thread Starter
jersey fresh
Joined: Dec 2005
Posts: 3,688
Likes: 0
From: Boston, MA
the bukkake master!
Joined: Apr 2005
Posts: 1,972
Likes: 1
From: Staten Island, NY
MSP CAI
Sr motorsport 9lb flywheel.
sr power pulleys
greddy cat back
soon to come ignition solution.. im starting to think i wont get it until summers here. anwyays
runnin royal purple 5w-30 in engine
redline 75-95 i tihnk redline lightweight shockproff oil in transmission and diferential. made a big difference..
oh BTW im dynoein at 95Hp 35 lbs of torque =D
jp boutt he specs hah
Sr motorsport 9lb flywheel.
sr power pulleys
greddy cat back
soon to come ignition solution.. im starting to think i wont get it until summers here. anwyays
runnin royal purple 5w-30 in engine
redline 75-95 i tihnk redline lightweight shockproff oil in transmission and diferential. made a big difference..
oh BTW im dynoein at 95Hp 35 lbs of torque =D
jp boutt he specs hah
