New Richmond thread (03/04/04)
Registered User
Joined: May 2004
Posts: 8
Likes: 0
Delta V is a shop that does a lot of japanese car modification/repair. The meet's are still at short pump, but if you guys ever need to switch locations delta v is available. So, as far as I know, meet's are still at Short Pump.
~brian
~brian
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Sooo...anyone want to give me a hand today? I'll have the car in the garage to change the clutch, some help would be appreciated. Let me know and I can pick up some beer/food!
Gimme a page at 2045443 if you want to stop by and I can give you directions to mapquest.
I'm in northern chesterfield, maybe 10 minutes from 288&360, or about 10-12 minutes from southside speedway.
Gimme a page at 2045443 if you want to stop by and I can give you directions to mapquest.
I'm in northern chesterfield, maybe 10 minutes from 288&360, or about 10-12 minutes from southside speedway.
Rev Addict
Joined: Nov 2003
Posts: 992
Likes: 0
From: Kawasaki Japan..Rep'n the Shin Maruko!!!!
Originally posted by Josepi_RX-7
Sooo...anyone want to give me a hand today? I'll have the car in the garage to change the clutch, some help would be appreciated. Let me know and I can pick up some beer/food!
Gimme a page at 2045443 if you want to stop by and I can give you directions to mapquest.
I'm in northern chesterfield, maybe 10 minutes from 288&360, or about 10-12 minutes from southside speedway.
Sooo...anyone want to give me a hand today? I'll have the car in the garage to change the clutch, some help would be appreciated. Let me know and I can pick up some beer/food!
Gimme a page at 2045443 if you want to stop by and I can give you directions to mapquest.
I'm in northern chesterfield, maybe 10 minutes from 288&360, or about 10-12 minutes from southside speedway.
Damn Jo...why couldn't you post this yesterday? I already made plans. I will give you a page when I free up.
9-K
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Originally posted by 9-K Rever
Damn Jo...why couldn't you post this yesterday? I already made plans. I will give you a page when I free up.
9-K
Damn Jo...why couldn't you post this yesterday? I already made plans. I will give you a page when I free up.
9-K
Hubble has been saved!
Joined: Aug 2003
Posts: 1,221
Likes: 0
From: Richmond, VA
Yeah, dealers are always leaving surprises for me too. See my rant in https://www.rx8club.com/showthread.p...threadid=29225
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Originally posted by msrecant
Yeah, dealers are always leaving surprises for me too. See my rant in https://www.rx8club.com/showthread.p...threadid=29225
Yeah, dealers are always leaving surprises for me too. See my rant in https://www.rx8club.com/showthread.p...threadid=29225
Got the transmission out and the flywheel nut (the 54mm giant) off, but now the flywheel doesn't want to come loose... :o
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Transmission is in!
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
Rev Addict
Joined: Nov 2003
Posts: 992
Likes: 0
From: Kawasaki Japan..Rep'n the Shin Maruko!!!!
Originally posted by Josepi_RX-7
Transmission is in!
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
Transmission is in!
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
HAhhahaa...damn...
Thread Starter
Registered User
Joined: Sep 2003
Posts: 672
Likes: 0
From: Richmond VA
Originally posted by Josepi_RX-7
Transmission is in!
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
Transmission is in!
Took about 3 hours, then about 15 minutes after I had the bright idea of propping the front of the engine up slightly to angle it back so the tranny input shaft would slide in more easily. Knowledge is a bitch.
BTW guys I won't be at the meet this weekend, going to Canada to watch F1 racing.
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Originally posted by Hanzo
Glad you're finally done.
BTW guys I won't be at the meet this weekend, going to Canada to watch F1 racing.
Glad you're finally done.
BTW guys I won't be at the meet this weekend, going to Canada to watch F1 racing.
But that's a cakewalk!
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Update (copied from the RX7club.com forum due to laziness 
)
Finished the clutch finally (yes it takes me forever to do anything right...but the right tools would have shaved two days off).
All I can say is hooooooooooly ****. I really have to force myself not to go WOT and over 4K...
Hows the new clutch grab? ******* quick! First start it didn't want to go thru the gears even in neutral, adjusted the pedal play and that was fixed. Took it for a spin. Stalled once in the driveway. Stalled about a mile down the road...then that was it...shifting took a whopping 10 shifts to get used to, going to still adapt as I go along as far as starts go. It's grabbing about 1cm off the floorboard! (I'm used to it grabbing 3/4 the way up).
While I was down there, I found a reason why the underside of my car was messy (4 wire sensor, less than hand tight), fixed that.
Big ol **** eating grin
)Finished the clutch finally (yes it takes me forever to do anything right...but the right tools would have shaved two days off).
All I can say is hooooooooooly ****. I really have to force myself not to go WOT and over 4K...
Hows the new clutch grab? ******* quick! First start it didn't want to go thru the gears even in neutral, adjusted the pedal play and that was fixed. Took it for a spin. Stalled once in the driveway. Stalled about a mile down the road...then that was it...shifting took a whopping 10 shifts to get used to, going to still adapt as I go along as far as starts go. It's grabbing about 1cm off the floorboard! (I'm used to it grabbing 3/4 the way up).
While I was down there, I found a reason why the underside of my car was messy (4 wire sensor, less than hand tight), fixed that.
Big ol **** eating grin
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Originally posted by Hanzo
Glad you're finally done.
BTW guys I won't be at the meet this weekend, going to Canada to watch F1 racing.
Glad you're finally done.
BTW guys I won't be at the meet this weekend, going to Canada to watch F1 racing.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 672
Likes: 0
From: Richmond VA
Originally posted by Josepi_RX-7
Well, if my memory is working, they've been 1/2 for every odd number race! This one is an even :D
Well, if my memory is working, they've been 1/2 for every odd number race! This one is an even :D
Registered User
Joined: Jan 2004
Posts: 71
Likes: 0
Originally posted by Hanzo
Didn't know you follow F1. I hope BAR or Renaul win this race. Sick of the red car winning.
Didn't know you follow F1. I hope BAR or Renaul win this race. Sick of the red car winning.
I've been watching it for most of this season, I dig it! :D
Thread Starter
Registered User
Joined: Sep 2003
Posts: 672
Likes: 0
From: Richmond VA
Originally posted by Josepi_RX-7
BAR could have done better the last time hadn't someone nailed the side of a ferrari...he was doing good up till that incident.
I've been watching it for most of this season, I dig it! :D
BAR could have done better the last time hadn't someone nailed the side of a ferrari...he was doing good up till that incident.
I've been watching it for most of this season, I dig it! :D
Too bad Sato's engine blew up but I like his style, not afraid of the scarlet car.
PS. PM me your email.