1st Official philly meet//// SONIC 1525 STREET ROAD, BENSALEM, PA 19020
The Angry Wheelchair
iTrader: (14)
Joined: May 2009
Posts: 1,865
Likes: 1
From: In da woodz, lurking after you
Just a word of advice, if you're gonna seafoam you might want to consider disconnecting the CAT. I know most don't but where do you think all that **** is gonna go after it gets removed from the rotors? It's going to evidently reduce your CAT life quite a bit.
I ran it fine when I had my cat. But I know what you are talking about...the black carbon liquid thats flammable. But it says its safe for cats...
The Angry Wheelchair
iTrader: (14)
Joined: May 2009
Posts: 1,865
Likes: 1
From: In da woodz, lurking after you
It's not the liquid you're putting in you need to worry about, it's the carbon deposits that come off when you let it sit in the seafoam for an hour or so before turning the car over. That stuff is not gonna be pure liquid, it's gonna be some sludge crap coming through the exhaust. Jedi and MM both warned people about this before, except most of them are running cat-less. Just given a fair warning.
Not saying you're gonna have issues off the bat with the CAT, but you have to realize it's going to reduce its life some with it getting stuck in there and may surface later down the road with a failed CAT. I may myself not bother with removing it because of the hassle to do it but just giving you a FYI.
Not saying you're gonna have issues off the bat with the CAT, but you have to realize it's going to reduce its life some with it getting stuck in there and may surface later down the road with a failed CAT. I may myself not bother with removing it because of the hassle to do it but just giving you a FYI.
TurboXS is out of the window, they're out of stock till sept. Now I'm waiting for one to come up used. As for removing the cat, I'm not really concerned. If it actually fails past my warranty i'll just get a hiflo.
Thread Starter
I LuV mY Rotary....
iTrader: (10)
Joined: May 2007
Posts: 3,408
Likes: 0
From: killADelPhia
Thursday 07/15/2010
Install meet at francesco's house 5pm (pm'him for directions to his house)
then Sonics on street road at 9pm
P.S New members always welcome!
sonic 9pm, 1525 Street Rd Bensalem, PA 19020
** please bring snacks and sodas**
Install meet at francesco's house 5pm (pm'him for directions to his house)
then Sonics on street road at 9pm
P.S New members always welcome!
sonic 9pm, 1525 Street Rd Bensalem, PA 19020
** please bring snacks and sodas**
Thread Starter
I LuV mY Rotary....
iTrader: (10)
Joined: May 2007
Posts: 3,408
Likes: 0
From: killADelPhia
Looks like I'm going to have to meet you at sonic... Been sitting here at the shop waiting for an authorisation from the customer and they decided to call back and give me the ok at 4:50!! Bastards... can't turn down the job/money though. So I'll be late but I'll see you guys there.


