RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   NE RX-8 Forum (https://www.rx8club.com/ne-rx-8-forum-29/)
-   -   1st Official philly meet//// SONIC 1525 STREET ROAD, BENSALEM, PA 19020 (https://www.rx8club.com/ne-rx-8-forum-29/1st-official-philly-meet-sonic-1525-street-road-bensalem-pa-19020-a-195805/)

lepichichi 04-22-2010 10:54 AM

10th Official philly meet 08//05/2010 /// Meeting at francesco's house Then sonic 9pm
 
Thursday 08/05/2010


Sonics on street road at 9pm

P.S New members always welcome!

sonic 9pm, 1525 Street Rd Bensalem, PA 19020


flaps720 04-22-2010 12:35 PM

Id come but I have band practice tonight, and usually every thursday night. Is this going to be a steady thing?

lepichichi 04-22-2010 12:47 PM

we are trying to have a meet once a week but we are not sure on the dates yet, so if you can't make it on thursday we will keep that in mind for the next meet, i will keep you updated, also we are trying to have a garage meet so we can work on our cars and just help each other out on whatever we need

flaps720 04-22-2010 12:58 PM

a garage meet would be awesome! But yeah, i'll stay posted. Isnt this the sonic where the TST meet was shut down a few weeks back?

Im_DANomite 04-22-2010 12:59 PM

i'll be up in philly this weekend :( cottman avenue

L337fpc 04-22-2010 01:08 PM

I'm in, and flaps...yea it was.

But we wont take over the parking lot or litter.

Oscar, i like the garage idea. I've got to install my lower front tie bracing...but the damn bolt is stripped and seized in place.

MarcMiller 04-22-2010 03:55 PM

Im going i should be there around 8:30-8:45...will yous still be there?

lepichichi 04-22-2010 04:04 PM


Originally Posted by MarcMiller (Post 3530999)
Im going i should be there around 8:30-8:45...will yous still be there?

we all gonna be there :) i should be getting there around 8-8:30


Originally Posted by L337fpc (Post 3530731)
I'm in, and flaps...yea it was.

But we wont take over the parking lot or litter.

Oscar, i like the garage idea. I've got to install my lower front tie bracing...but the damn bolt is stripped and seized in place.

hey francesco i got tools, air tank etc etc but i dont have a garage, we can set up a meet for next week in the back of my house so we can help you out, i know felix, carlos, and jose are close by me, so i don't see why we cant help you out, I also have a deck for hot dogs and burgers :) we can work in our cars and then head to sonic at night

MarcMiller 04-22-2010 10:43 PM

I'll admit it..i felt pretty cool driving behind 2 other rx8s.
Maybe if i could keep up that would be cool

flaps720 04-22-2010 11:44 PM


Originally Posted by MarcMiller (Post 3531594)
I'll admit it..i felt pretty cool driving behind 2 other rx8s.
Maybe if i could keep up that would be cool

pffff...haha if i was rollin with you guys you prolly wouldn't feel as bad!

L337fpc 04-23-2010 06:09 AM

That was a nice little meet last night. Plus sonic is ftw.


Originally Posted by lepichichi (Post 3531019)
hey francesco i got tools, air tank etc etc but i dont have a garage, we can set up a meet for next week in the back of my house so we can help you out, i know felix, carlos, and jose are close by me, so i don't see why we cant help you out, I also have a deck for hot dogs and burgers :) we can work in our cars and then head to sonic at night

Just let me know when you have a free night or weekend. I'll definitely head over. I've got everything but air tools. Air tools should make this a breeze, should.

MarcMiller 04-23-2010 06:14 AM


Originally Posted by flaps720 (Post 3531647)
pffff...haha if i was rollin with you guys you prolly wouldn't feel as bad!


haha whys that?

lepichichi 04-23-2010 10:48 AM

first of all, thanks to everyone for coming out..!!!

second of all, we need a garage for the next meet so we can help francesco out
(we can use the back of my house but there is not much space to park)

third of all, flpas720 has practice on thursdays and can't make it, so should we meet on a different day?


Originally Posted by MarcMiller (Post 3531594)
I'll admit it..i felt pretty cool driving behind 2 other rx8s.
Maybe if i could keep up that would be cool

wait for the next sushi meet :) there will be at least 10 rx8's heading over to nj

L337fpc 04-23-2010 11:56 AM

Well, hell its my car...I've got 3 jacks and 8 stands...2 cars could be worked on at a time...oh and 2 garage bays.

I'm free after 6:30pm most of the time.

But for my GTSPEC bracing...I'm gonna need to contact GTSPEC since my instructions are in Japanese...:headbang:.

flaps720 04-23-2010 12:09 PM


Originally Posted by MarcMiller (Post 3531736)
haha whys that?

just fig'd cause my car is pretty stock in the performance parts category...


third of all, flpas720 has practice on thursdays and can't make it, so should we meet on a different day?
yeah my band typically practices every tues and thurs, but dont change the day on my account, im super busy and its gonna be hard for me to make meets regularly. I do have thursdays off every so often when we have a show on a friday night

failsafe 04-23-2010 02:31 PM

Couldn't make it out last night, sorry bout that. Thursdays are generally ok for me though.

Francesco, got any free time tomorrow at all? Im gonna throw that BHR kit in and get back up and running hopefully.

L337fpc 04-23-2010 02:33 PM


Originally Posted by failsafe (Post 3532524)
Francesco, got any free time tomorrow at all? Im gonna throw that BHR kit in and get back up and running hopefully.

Tomorrow is all full up. Sunday is free. Let me know if you need an extra hand still.

failsafe 04-23-2010 02:51 PM

Yeah, Im gonna have to knock it all out tomorrow. It's supposed to pour on Sunday. Ugh. Thanks though.

lepichichi 04-23-2010 05:50 PM

^^ damn guys we defenetly need a garage :) im free sunday too if you need a hand failsafe

L337fpc 04-24-2010 05:56 AM


Originally Posted by lepichichi (Post 3532766)
^^ damn guys we defenetly need a garage :)

I got the English instructions for my GTSPEC parts...my original was in japanese...lol.

I looked at the bolt...its gonna have to be drilled out. I have left handed drill bits; Oscar, think we can drill out the seized bolt?

As far as a garage meet goes; we could have an install day/weekend if every1 has some parts they need to put on. I can't say I've seen a PA install day. I know TNC in NJ has had a few install days...why can't we?! lol.

I offer up my garage, 2 bays, 3 jacks, 8 jack stands.

lepichichi 04-24-2010 11:15 AM


Originally Posted by L337fpc (Post 3533351)
I got the English instructions for my GTSPEC parts...my original was in japanese...lol.

I looked at the bolt...its gonna have to be drilled out. I have left handed drill bits; Oscar, think we can drill out the seized bolt?

As far as a garage meet goes; we could have an install day/weekend if every1 has some parts they need to put on. I can't say I've seen a PA install day. I know TNC in NJ has had a few install days...why can't we?! lol.

I offer up my garage, 2 bays, 3 jacks, 8 jack stands.

I have the air gun and a torch for the seized bolt, what day is good for you??? I can probably swing by with the air tank, torch and tools

L337fpc 04-24-2010 11:51 AM


Originally Posted by lepichichi (Post 3533559)
I have the air gun and a torch for the seized bolt, what day is good for you??? I can probably swing by with the air tank, torch and tools

I figured we'd use it for a garage meet. I'm not in a rush to install it. I'm good friday nights, saturdays after 12, and sundays.

stinksause 04-26-2010 12:34 PM

I am definitely interested!!!! Thurs is ok ... Fri is better ... Ill need to install an AP midpipe soon :) I can bring 2 stands and another hydro jack

L337fpc 04-26-2010 12:38 PM


Originally Posted by stinksause (Post 3535686)
I am definitely interested!!!! Thurs is ok ... Fri is better ... Ill need to install an AP midpipe soon :)

Midpipe install eh, get spare hardware....trust me. I fought the bolts...and the bolts won. Well that is until i got my dremel out.

I'm definitely going to make it out every thursday.

This week, i'm running a stupid loud setup, hks hi-power and exoticspeed race pipe :lol:

As far as a garage meet, im willing to host.

flaps720 04-26-2010 06:36 PM

i think i might actually be free this thursday...:suspect:


All times are GMT -5. The time now is 09:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands