Notices
Mountain Forum Serving MT, WY, UT, CO, NM

Colorado?

Old May 9, 2009 | 01:15 AM
  #451  
Greek Racer 8's Avatar
Colorado's Fastest RX-8
 
Joined: Apr 2007
Posts: 129
Likes: 0
From: Denver, CO
As long as non of your mods bolt directly to the motor you should have no problem with the 100k mile warranty. I would suggest also BHR's upgraded coils. I havn't purchased them myself but have gone through 4 sets of stock coils last year while I was still under the powertrain warranty. I still have random missfires.

My 8 is itching to get out to HPR. I just wanna go a few times first though. Also Driving school so I won't look lame and confused when if I ever get out there. I also wanna do some Auto X. It all depends how my tranny is after I replace the slave cylinder. Already had McDonald Mazda replace second gear and syncros and am still grinding when shifting into second.
Reply
Old May 12, 2009 | 10:54 AM
  #452  
parkpy's Avatar
Registered
iTrader: (1)
 
Joined: Nov 2007
Posts: 136
Likes: 0
From: Denver
Originally Posted by Greek Racer 8
As long as non of your mods bolt directly to the motor you should have no problem with the 100k mile warranty. I would suggest also BHR's upgraded coils. I havn't purchased them myself but have gone through 4 sets of stock coils last year while I was still under the powertrain warranty. I still have random missfires.

My 8 is itching to get out to HPR. I just wanna go a few times first though. Also Driving school so I won't look lame and confused when if I ever get out there. I also wanna do some Auto X. It all depends how my tranny is after I replace the slave cylinder. Already had McDonald Mazda replace second gear and syncros and am still grinding when shifting into second.
Driving school first, then HPR A driving school is a bargain. For $150-175 you get personal instruction on a course you don't know, and by the end of the day you've had all the track time you wanted and know what you're doing..

An open lapping day will cost $150 and you won't know what you're doing, you'll be in everyone's way, and I'll hate you.:P
Reply
Old May 13, 2009 | 10:24 AM
  #453  
parkpy's Avatar
Registered
iTrader: (1)
 
Joined: Nov 2007
Posts: 136
Likes: 0
From: Denver
Hello yffs:

Hitting HPR again this Friday A.M. (May 13th) if anyone is interested. I know that Scott (Ergokinetics) and Mike (E90 M3) will be going as well for the morning session.

Hope some of you guys can make it out!
Reply
Old May 13, 2009 | 12:52 PM
  #454  
Greek Racer 8's Avatar
Colorado's Fastest RX-8
 
Joined: Apr 2007
Posts: 129
Likes: 0
From: Denver, CO
Originally Posted by parkpy
Driving school first, then HPR A driving school is a bargain. For $150-175 you get personal instruction on a course you don't know, and by the end of the day you've had all the track time you wanted and know what you're doing..

An open lapping day will cost $150 and you won't know what you're doing, you'll be in everyone's way, and I'll hate you.:P
Ha... Yeah don't hate me. Sounds like school it is. When I can muster up the funds. You should post up on CMZC.net. We need more RX8s and people intrested in HPR over there. We do weekly Sonic meets every sunday and a cruise through the mountains afterwards. That is also the new home of MHR (Mile High Rotaries) You could meet more RX8/rotary owners there.

Last edited by Greek Racer 8; May 21, 2009 at 08:35 PM.
Reply
Old May 13, 2009 | 02:24 PM
  #455  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
^^^yeah^^^ sign up on CMZC. We need more 8s!
Reply
Old May 13, 2009 | 03:22 PM
  #456  
airstriker2005's Avatar
Registered
 
Joined: Feb 2009
Posts: 19
Likes: 0
From: C-Springs
mountain drives...sounds fun. I feel like going for a drive today but just cant seem to find anyone else interested.
Reply
Old May 13, 2009 | 03:29 PM
  #457  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
I am a slave to work on the weekdays!
Reply
Old May 13, 2009 | 03:34 PM
  #458  
airstriker2005's Avatar
Registered
 
Joined: Feb 2009
Posts: 19
Likes: 0
From: C-Springs
I here ya. I think i might just cruize on my own.
Reply
Old Jun 13, 2009 | 01:29 PM
  #459  
lokoebird's Avatar
DON'T HATE THE 8
 
Joined: Jul 2006
Posts: 126
Likes: 0
From: Im' from Guam. Stationed in Colorado. Deployed to Iraq.
Hey Colorado Springs, sorry I haven't been around here for a while. Im deployed right now in case you didnt know. I'll be back soon. Hey Greek, remember me? Got the dent fixed. So what happened to Ghosts turbo? Well I'm saving up for a greddy turbo myself. Do you guys know if Revolutions can do the Greddy fixes and how much is labor? Also my buddy here has a Turbo on his 8 but he doesn't know if it's greddy or what because he bought the car like with it and he's a complete NOOB!!!! He's selling his kit to me. I was wondering if Revolutions can uninstall a kit then install it into mine? How much do you think labor is? Well tell everyone at CMZ that I said whats up. Have you guys heard this other speed shop in the Springs called Street Dreams? I knew the owner but I don't know what happened to him. Well, duty calls. See you in a few.
Reply
Old Jun 23, 2009 | 08:56 PM
  #460  
KrumbZ's Avatar
1.3L of Fury
iTrader: (3)
 
Joined: Jan 2009
Posts: 266
Likes: 0
From: Colorado Springs
just got to colorado springs!!!
Reply
Old Jun 24, 2009 | 10:36 AM
  #461  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
Welcome! Check out the coloradomazdaclub.com for events in the area.

Hope to see you around....
Reply
Old Jun 27, 2009 | 12:15 PM
  #462  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
I interviewed for a job in Springs yesterday...will keep y'all posted.
Reply
Old Jun 29, 2009 | 12:18 AM
  #463  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
I just arrived in Colorado a few days ago!

Got a house in Loveland (hour north of Denver) we are moving in Tuesday.

I hope to be able to get together and meet some local 8 and Mazda owners!

I was wondering if anyone wanted to get together for UFC 100 on the 11th?

And so far my car seems to be running fine- idle is good and I haven't had to adjust anything. I haven't really gotten on it yet to test out, been too busy, but I am pulling more vacuum it seems (odd) around 22" at idle.

Tomorrow is a free day so hopefully I can test her out in boooooost
Reply
Old Jul 13, 2009 | 12:14 AM
  #464  
MichaelB145's Avatar
MileHighRotaryClub.com
 
Joined: Jan 2005
Posts: 50
Likes: 0
From: Littleton Colorado
Rotary / Mazda meet July 25th at Mazda of Lakewood racing open house

We are looking to get a bunch of RX-8's to this meet! Will be the largest gathering of Mazda's ever in Colorado!

Mazda of Lakewood Racing Open House
When:
Saturday, July 25, 2009

Meet:
Mazda of Lakewood dealership at 7999 West Colfax Ave in Lakewood

Food:
Free hot dogs and drink

RSVP:
Please respond to Mike B @ Mike@clubautocolorado.com or call 303-929-1998 so an appropriately sized parking area can be reserved for us. However, still come if you don't RSVP!
We will participate in the Mazda of Lakewood Racing Open House from 9:00 - 3:00. This is a great chance to meet the new owner Mel who is a great guy! There will be representative cars from SCCA club racing, time trial cars, spec Miatas, the Mazda Club, the Mazda Rotary Club, and who knows what else. They are trying to make this the largest Mazda event in the state and are expecting around 100 cars! There will also be a live remote from KOOL 105. This is going to be a great time to hang out with fellow Mazda enthusiasts and see some different cars. Let's have a good showing from all you Mazda lovers. If you own a Mazda, please do everything you can to get it there!

Thank you everyone!

Mike B
mike@clubautocolorado.com
303-929-1998 cell
Reply
Old Jul 15, 2009 | 08:53 PM
  #465  
airstriker2005's Avatar
Registered
 
Joined: Feb 2009
Posts: 19
Likes: 0
From: C-Springs
Originally Posted by chickenwafer
I just arrived in Colorado a few days ago!

Got a house in Loveland (hour north of Denver) we are moving in Tuesday.

I hope to be able to get together and meet some local 8 and Mazda owners!

I was wondering if anyone wanted to get together for UFC 100 on the 11th?

And so far my car seems to be running fine- idle is good and I haven't had to adjust anything. I haven't really gotten on it yet to test out, been too busy, but I am pulling more vacuum it seems (odd) around 22" at idle.

Tomorrow is a free day so hopefully I can test her out in boooooost
Hey chickenwafer how are you enjoying colorado so far? So what did you think of the fight? I went and caught it at Champs in Denver with a few friends.
Reply
Old Jul 16, 2009 | 02:25 PM
  #466  
lancer's Avatar
Registered User
 
Joined: Jun 2008
Posts: 79
Likes: 0
From: denver, CO
hey guys, i'm in Denver area too. just have a quick question. any of you know where I can find a good body shop to paint, do body kits.
Reply
Old Jul 21, 2009 | 10:41 PM
  #467  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
Originally Posted by airstriker2005
Hey chickenwafer how are you enjoying colorado so far? So what did you think of the fight? I went and caught it at Champs in Denver with a few friends.
Hey man. So far Colorado is pretty nice. I love the mountains...the air is crisp....and it isn't 115 degrees! But the bugs and rain are KILLING me. Not used to that LOL

The fight was pretty kickass. When Henderson knocked Bisbing out I knew nothing could up the rest of my night LOL. I was just a little sad when Mir lost to Lesnar....I wish Frank could have put a better fight.

I'm going to the show at Mazda Of Lakewood on the 25th, you guys should come down.
Reply
Old Jul 22, 2009 | 04:51 AM
  #468  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
I am soooo pissed that I am going to miss the biggest Mazda meet in CO. So far it looks like you wil have the only 8 in the show (from CMZC anyway). If I wasn't in Iraq I would have definitly been there!

Good luck!
Reply
Old Jul 22, 2009 | 05:15 PM
  #469  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
Oh damn you're right man! I will have the only 8. So sad. I will represent well tho!
Reply
Old Jul 22, 2009 | 06:41 PM
  #470  
BruceInColorado's Avatar
Registered User
 
Joined: Mar 2004
Posts: 22
Likes: 0
From: Arvada, Colorado
Competent/reasonable shop to replace RX-8 plugs?

Is there any shop in the west Denver Metro area (Arvada/Golden/Lakewood)that you trust to replace the plugs on my (2004) RX-8's rotary... and not charge a ton of money?

The acceleration is a bit boggy when hot, and its got 42K, so now's the time.

I know that DIY is best, but I just don't have the room or free time, and I have this recurring nightmare about destroying my car.

I've also read horror stories about dealers charging $800 or more just to replace the plugs - but that's out of control. Yeah, I know I have a cool sports car... but I don't have that kind of dough to blow!

Any help would be appreciated in finding a decent shop that won't soak me because I have an RX-8.
Reply
Old Jul 23, 2009 | 04:32 AM
  #471  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
Originally Posted by chickenwafer
Oh damn you're right man! I will have the only 8. So sad. I will represent well tho!
I can't think of anyone better either! G/L
Reply
Old Jul 23, 2009 | 04:45 PM
  #472  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
Thanks bro!

If anyone else if free this saturday, you should come out of the Mazda Of Lakewood event. It's gonna be a good time!
Reply
Old Jul 23, 2009 | 11:18 PM
  #473  
CaptainEggs's Avatar
Registered User
 
Joined: Dec 2008
Posts: 167
Likes: 0
From: Denver
i might come down... depends what comes up. but does anyone know of some good bodyshops in the thorton/ brighton area? or somewhere close to that...
Reply
Old Aug 14, 2009 | 12:07 PM
  #474  
dutch747's Avatar
Registered User
 
Joined: Aug 2009
Posts: 7
Likes: 0
From: Colorado Springs
Hey Darth,

What are using (software wise) to post your pic's? Do you reduce the file size and/or pixels?

Want to post some of my pics but can't figure out how.

Thanks for your help!
Reply
Old Aug 14, 2009 | 12:57 PM
  #475  
DarthRX8's Avatar
Force User
 
Joined: Jan 2008
Posts: 386
Likes: 1
From: D.C.
Open the file in paint, click on Image, and then go to stretch/skew.

Shrink it down (its by percentage). Then save it and upload it. Let me know if you need more help.
Reply

Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 2 votes, 1.00 average.


All times are GMT -5. The time now is 03:24 AM.