if / when Jeff cooks his PCM due to reflashes, then we can worry. :)
|
Originally Posted by Jedi54
(Post 2796345)
if / when Jeff cooks his PCM due to reflashes, then we can worry. :)
I keep a couple of extra PCMs around, but I'm well over 500 flashes on this one with no issues. |
yeah i doubt many/any others will be coming close to that much..
|
I sure hope not.
That is a LOT of e-mail from me! Can you imagine? If HALF of my customer base required only half as many flashes each to get it right, I'd have to email out over 5000 calibrations! |
but your all streamlined now thats makes it easy right? lol
|
Yes!
I just sent out 100 calibrations with my mind! I sent out another 50 while I typed that! |
And if it took 250 adjustments, fuel cost for tuning might actually need it's own spot on the budget.
Ok, cool beans. Jeff, how many stages come after 4.0.2? |
Originally Posted by Jasonawojo
(Post 2796392)
And if it took 250 adjustments, fuel cost for tuning might actually need it's own spot on the budget.
Ok, cool beans. Jeff, how many stages come after 4.0.2? Normally, there is only one more. v4.0.3 is the "tuned" version once the MAF/injectors thing is worked out. Did we go through the whole thing correctly, or did I still cook you by mixing and matching logs against the wrong calibration? You are the guy that wanted to update even though you were already properly tuned on the v3 set, right? |
Woo.. so I should be expecting my "tuned" version soon? :D::D:
|
You do realize this is a holiday week and its the weekend, right?
|
I lost track of time on new years eve, forgive my insolence master.
|
Originally Posted by MazdaManiac
(Post 2796394)
That depends. If your v4.0.2 is f-ed up, it might be two or three more.
Normally, there is only one more. v4.0.3 is the "tuned" version once the MAF/injectors thing is worked out. Did we go through the whole thing correctly, or did I still cook you by mixing and matching logs against the wrong calibration? You are the guy that wanted to update even though you were already properly tuned on the v3 set, right? I'm not sure if the 4.0.2 is "bad" or not, as the cruise and WOT trims are positive a few. The idle ltft on my log is +20 though. I originally sent proper logs for 4.0.0, then decided against going through the work to redo it. Then after discussing my v3 tune on the forum you said to send you logs from it so I sent you idle and cruise logs from my v3 tune. Originally you sent me a 4.0.1 based on those, but then after I PMed you about it said to disregard the 4.0.1 tune you sent me and that I didn't need to do anything on my end. Then I got the 4.0.2 when a few others did. |
I've been in a constant fog since the 25th, so no worries.
Originally Posted by Jasonawojo
(Post 2796417)
Then I got the 4.0.2 when a few others did.
|
By the way Jeff can we go postal on the postal service?? I still have not received the package you sent me with the injectors and the couplers :(
I think USPS wants me to suffer though christmas :( |
That is getting ridiculous.
I'll just send you another set via UPS and you can send me back the first one once it finally gets there. |
out in the garage right now, about to do a DataLog but ran into a problem.
The car was idling as I was setting the Data Log List when the AP told me it could not connect to ECU (car was on) and the Tach started fluctuating between 500 - 2500 rpm. (though the car's idle was unchanged) turned the car off, unplugged the AP and plugged it back in. The tach is steady but Traction Controll Off light is still on. Now have the following Codes: PCM U0073 IC: U1900 EPS: U1900, U0073 RKE: U1900 :scratchhe Dont want to reset the codes as it'll reset the ECU and I'll lose the fuel trims. hmmm... Gonna go google search those and see what I come up with. |
I had the same traction control light come on after I upgraded the flash on the AP. Turned off the car and turned it back on and light has not come back on since. I did not get any cel codes with the dsc light.. so not sure what's going on with that Jedi.
|
Here's what I got for ya, Jedi:
U0073 CAN system communication error • PCM U1900 CAN system communication error • DSC HU/CM Sounds like you got a BSOD. Check out: http://foxed.ca/rx7manual/2003mazdar...html#wp1025486 |
traction control light now off. (turned car off and on again)
now to see if my AP is logging properly. First attempt had it logging stuff that I hadn't asked it for. |
thanks Shell.
BSOD? |
car seems to be fine, 1st Data log worked. Gonna go do my driving log and then reset the codes.
Wish me luck boys! :) |
Windows Blue Screen Of Death :)
From 4,500 miles away in an armchair it sounds like your PCM rebooted or crashed or something odd along those lines. I wonder if your dongle caused a short... |
BSOD; damn it, I know that one! Just thought you were making up some other weird AP accronym
data logs came out well, gonna send them to jeff along with the 11 deadly questions and then off to reset those codes. how's the weather 4500 miles from here? |
My car also had the DSC code come up just a few hours ago on the highway. That and my ABS light came on. I couldn't engage/disengage my DSC nor my cruise control. I pulled over on the highway and cycled the car, all the codes cleared and lights cleared.
I'm still running the base 4.0.1 maps...and I'm still running uber rich, like high 13's @ idle and in most common driving. |
balmy 41 today... here are the conditions at my house, literally...
http://weather.shellware.com/Weather.aspx |
All times are GMT -5. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands