Official SARX Lounge
black rx8. 20 inch chrome wheels. some thing attached to the rotor emblem on the hood. mazdaspeed replica front, painted with housepaint and a paintroller. paint drips over the entire car. the same paint is on the back taillights. almost 0 light emits. his car makes me want to vomit and i know hes just a stupid kid. oh neons too.
Bring it on smalls, BRING IT ON! 
low blow grunge, low blow.
Fortunately we have showed him the way (Jedi Mind tricks were involved) and he no longer has 20" wheels.

Fortunately we have showed him the way (Jedi Mind tricks were involved) and he no longer has 20" wheels.
Last edited by Jedi54; Dec 6, 2010 at 01:17 PM.
black rx8. 20 inch chrome wheels. some thing attached to the rotor emblem on the hood. mazdaspeed replica front, painted with housepaint and a paintroller. paint drips over the entire car. the same paint is on the back taillights. almost 0 light emits. his car makes me want to vomit and i know hes just a stupid kid. oh neons too.
whose car is it?

Unfortunately I still think the 8 is down for the count. I haven't heard from that guy in a while, I think he was working on his 7 and there was talk of a piston motor swap at one point for the 8.

tis all good man....
on a separate note, I will be contacting you soon. Looks like i will be visiting the socal nation soon
Seen this for sale on autotrader.com and looks well taken care of:
http://www.autotrader.com/fyc/vdp.js...standard=false
Was this anyone's off the forum?
http://www.autotrader.com/fyc/vdp.js...standard=false
Was this anyone's off the forum?
Nope, we can knock it out if you want.
Seen this for sale on autotrader.com and looks well taken care of:
http://www.autotrader.com/fyc/vdp.js...standard=false
Was this anyone's off the forum?
http://www.autotrader.com/fyc/vdp.js...standard=false
Was this anyone's off the forum?
Sounds good. Shouldn't take too long. Seems like a couple things might be a bit of a pain, but overall should be a quick install.
A cop is coming over later to have me identify the driver in a line up from that hit and run I witnessed... that should be interesting.
A cop is coming over later to have me identify the driver in a line up from that hit and run I witnessed... that should be interesting.
Gauges are not that complicated (hopefully). Is he is gonna show you pictures or what?
Just finished it lol... took like 10 seconds. He had a sheet of like 8-10 pictures and I just had to identify which was the guy. I got it right! lol... I was divided on 2 different guys but leaned towards the one that was the guy. The officer told me that was the one so I'm not sure why it was necessary for me to identify him.
The gauge install is basically 3 wires (ground, power and lights?) and then the T fitting and hose connection. The pod itself is literally a few screws since it just replaces the stock column cover. On this page you can click on the link for "Read VEI installation instructions" to see the instructions:
http://podi.ca/P1Packages.aspx?CarID=8
Fairly generic, but probably sufficient. I'm just not good at identifying which wires need to be tapped (aside from the ground). They say not to tap the FPR line, but every install thing I've seen says to ignore that and do it anyways lol.
The gauge install is basically 3 wires (ground, power and lights?) and then the T fitting and hose connection. The pod itself is literally a few screws since it just replaces the stock column cover. On this page you can click on the link for "Read VEI installation instructions" to see the instructions:
http://podi.ca/P1Packages.aspx?CarID=8
Fairly generic, but probably sufficient. I'm just not good at identifying which wires need to be tapped (aside from the ground). They say not to tap the FPR line, but every install thing I've seen says to ignore that and do it anyways lol.
Didn't think about it till later on, but he mentioned that the only other picture of the guy was him in an orange shirt so they couldn't use it... wondering if this is the type of shirt they meant:
Just finished it lol... took like 10 seconds. He had a sheet of like 8-10 pictures and I just had to identify which was the guy. I got it right! lol... I was divided on 2 different guys but leaned towards the one that was the guy. The officer told me that was the one so I'm not sure why it was necessary for me to identify him.
The gauge install is basically 3 wires (ground, power and lights?) and then the T fitting and hose connection. The pod itself is literally a few screws since it just replaces the stock column cover. On this page you can click on the link for "Read VEI installation instructions" to see the instructions:
http://podi.ca/P1Packages.aspx?CarID=8
Fairly generic, but probably sufficient. I'm just not good at identifying which wires need to be tapped (aside from the ground). They say not to tap the FPR line, but every install thing I've seen says to ignore that and do it anyways lol.
The gauge install is basically 3 wires (ground, power and lights?) and then the T fitting and hose connection. The pod itself is literally a few screws since it just replaces the stock column cover. On this page you can click on the link for "Read VEI installation instructions" to see the instructions:
http://podi.ca/P1Packages.aspx?CarID=8
Fairly generic, but probably sufficient. I'm just not good at identifying which wires need to be tapped (aside from the ground). They say not to tap the FPR line, but every install thing I've seen says to ignore that and do it anyways lol.
whats up SA guys, i might be visiting some time in the next 2 weeks, I will probably have a couple of friends with me and we want to go take a trip to san antonio (friends are from florida). what are like some good spots to visit? I always go through san antonio a lot but i never really visit the city itself. so I'm free to any suggestions.
Anyone know of anyone that has a Front spoiler? The little black plastic piece that runs underneath the bumpers that weren't fortunate enough to have an air dam?
http://www.trademotion.com/partlocat...layCatalogid=0
number 20^^^
I have cash.
http://www.trademotion.com/partlocat...layCatalogid=0
number 20^^^
I have cash.
whats up SA guys, i might be visiting some time in the next 2 weeks, I will probably have a couple of friends with me and we want to go take a trip to san antonio (friends are from florida). what are like some good spots to visit? I always go through san antonio a lot but i never really visit the city itself. so I'm free to any suggestions.
Anyone know of anyone that has a Front spoiler? The little black plastic piece that runs underneath the bumpers that weren't fortunate enough to have an air dam?
http://www.trademotion.com/partlocat...layCatalogid=0
number 20^^^
I have cash.
http://www.trademotion.com/partlocat...layCatalogid=0
number 20^^^
I have cash.



