BigRed

but it is height adjustable tho right?

PoLaK

iTrader: (1)

Yes... read/understand/then spend money.

BigRed

i dont feel like reading 9 pages, i understand completely, im not spending the money for a bit. its unclear on kw's website

PoLaK

iTrader: (1)

anyway, I went on mazdaspeed motorsports to figure out how much it would be to replace all the rubber pieces in the stock top mounts since mine should be fairly worn after 40k, turns out its only $35 to replace everything which i'd be doing rather than reconditioning the old rubber. New rubber parts will make them pretty much good as new.

part numbers for what you need are below:

4 qty F151-28-776
4 qty F151-28-775A
2 qty F151-28-012

BigRed

lol +1

PoLaK

iTrader: (1)

1. Dannobre - Paid
2. MazdaspeedFeras- Paid
3. PsychoFox- Paid
4.
5.
6.
7.
8.
9.
10.

Dan and Feras sorry for the delay in getting you tracking #'s I'm leaving messages and will have them soon.
Psycho your order is still processing.

Feras

iTrader: (1)

i may just wait for you to get back here anyway to install em

Psychofox

hopefully it will be here soon

eviltwinkie

Hopefully this GB should keep running for a while...scraping money together...

1+ Interest

Nemesis8

iTrader: (3)

Nice price, but I will be hard pressed to part with my Zeals.

dannobre

iTrader: (3)

I have so much stuff to install.......and so little time. Roll bar, harnesses, seats...and the KW's when they get here.......At this rate I won't get another track day till June.....

OH....I don't anyway Guess I can chill a bit...

PoLaK

iTrader: (1)

1. Dannobre - Paid
2. MazdaspeedFeras- Paid
3. PsychoFox- Paid
4.
5.
6.
7.
8.
9.
10.

Ferrrrrrrras's coilovers shipped 4/25 Tracking PM'd
Dan's are shipping from Germany won't have a Tracking number till they are State side.
Psycho's shipped from Germany yesterday as well.

dannobre

iTrader: (3)

Was wondering where they were. It's starting to look like my car will be in pieces for a while starting in a few weeks anyway..... So I'm really not in a big hurry

Feras

iTrader: (1)

**** im not gonna be home for that shipping date (going on a vacation) hmm hope no one takes them thanks for the update mark.

dannobre

iTrader: (3)

Too bad it's so far...I'm sure with the tracking info...someone will find them on your step

I would phone and arrange alternate delivery ....

Nemesis8

iTrader: (3)

Yeah, I would delete the track link and PM those instead

Feras

iTrader: (1)

good point mark please take that tracking number off this public forum

dannobre

iTrader: (3)

Damn..I had arranged for a midnight pickup Just get them on the car already

chickenwafer

iTrader: (9)

I would not post tracking numbers here, I've been able to re-route packages in-transit just with a tracking number

Oh yeah, sweet suspension. I'm seriously considering these or the Tein Flex's with EDFC. If the top adjuster is the same, I don't see why you couldn't mount a complete EDFC kit on these. Of course the caliabration would be off.

PoLaK

iTrader: (1)

Yeah so it would be worthless, think about it let say tien adjuster does one full 360deg rotation, these KWs do 3.5 360deg rotations. Beside that the adjuster isn't the same, hense why i had to buy my own motors and have my own programing table made, plus the kit i'm making will be a lot more practical than EDFC the component are going to end up costing between $50-100.00, its ridiculous they charge $360 for that.

chickenwafer

iTrader: (9)

^Yeah that's what I was thinking anyways. I just like the digital controller of the EDFC. If you wanted to go more high tech and depending on how electrically-innept you are, you could make a custom digital controller. Like a read out for each setting your changing, or even allow for micro adjustments. I would use two ***** and then do the same for the front so you can adjust both in the car as well.

PoLaK

iTrader: (1)

I plan on using something similar to the volume ***** on stereos, They are going to be small enough that they can fit in sequence, in the mini change holder under the DSC OFF button and other buttons.

chickenwafer

iTrader: (9)

that sounds good. Getting the calibration right is key, of course.

I still like a digital readout or something. I guess I would make so it can fit in the ashtray and have numbers outside with switch position that are easy to read- so you can simply flick it to a pre-determined setting. Plus, then you could look at it in a glance and know you settings. Just an idea.

Feras

iTrader: (1)

it really is cooler without the display, just some crazy ***** and switches that no one but the drivers knows does anything

PoLaK

iTrader: (1)

You can glance at a fender guitar and know your at volume 10 because its pointing to "10" etc....

Problem with "digital potentiometers" is that they are bulky and expensive, and wouldn't look right in the interior the only substitue i found was this new zalman fan speed contoroller just imagine it saying Shock 1 instead of Fan 1.
http://www.zalman.co.kr/upload/product/zm_mfc2_s_p.jpg
Problem is again bulky and expensive.