New Malaysia RX-8 thread.
#1402
sometimes aircond on will drop a little but nevermind that, but whats more important is there is something in the engine that is loose. either the engine is loose or some thing..
#1405
hi ppl, my car facing a problem, like something loose inside the engine, happens when idling when the rpm is about 600 something inside the engine bay and will cause the pedals to vibrate yr foot. also happens when moving from slow speeds as i toggle the clutch and gas pedal (where the RPM tends to dropa little) some **** is vibrating unnarutally.. at 1st impression it could be the engine mounting but then again it could be something else..
#1407
RE雨&
Join Date: Jun 2006
Location: Kuala Lumpur, Malaysia
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
I have a CEL after i removed the battery terminals and replaced with another battery. I'm thinking it could be low voltage. Then I removed and replaced back with the previous battery, and the CEL still wont' go away. Hmmm.
Lennon - Where can I go to check diagnostics?
Lennon - Where can I go to check diagnostics?
#1409
Too bad Ah Choy has gone to Sabah, if not i'll bring you..... He'll be back this week, i'll call you then..... No wonder you want the Scangauge.....
#1411
i did not see the video. so i don't know what gti it is . a N/A rx8 will definately lose on straight road to a vw golf gti. my healthy o engine is making 193hp on wheels while the gti is already making 24x on wheels.
that makes the diff.
that makes the diff.
#1413
Registered User
Join Date: Jan 2005
Location: Malaysia
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
my CEL light has been on for the past few month...just sent it into my friend's garage for cross checking....do you guys know anybody with the scanner in KL? this car is driving me up the wall....THANKS guys!
#1417
Registered User
Join Date: Jan 2005
Location: Malaysia
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the number THE BOY!!! yeah, how's the diagnosis? does ah choy have scanner? i need to fix the car...sob sob... cannot tahan having that stupid yellow CEL light anymore!
#1418
RE雨&
Join Date: Jun 2006
Location: Kuala Lumpur, Malaysia
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Lennon - Couldn't tahan the CEL. So i pop by C&C Mazda Service Centre. Apparently, it was my engine oil sensor wire putus. So they soldered it back and the CEL also hilang. I asked about the PT no. but the mech had gone home. I'll call tomorrow to check the PT number so that I can cross-reference with my Workshop manual at home. Really want to buy the scangauge liao.
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?
#1419
#1420
Did you ask you other frens to diagnose, since he's there??
#1421
Lennon - Couldn't tahan the CEL. So i pop by C&C Mazda Service Centre. Apparently, it was my engine oil sensor wire putus. So they soldered it back and the CEL also hilang. I asked about the PT no. but the mech had gone home. I'll call tomorrow to check the PT number so that I can cross-reference with my Workshop manual at home. Really want to buy the scangauge liao.
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?
Don't need to get scan gauge lar..... let Ah Choy do it for free mah...... plus he's near your house.....
#1422
#1423
RE雨&
Join Date: Jun 2006
Location: Kuala Lumpur, Malaysia
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Anyone interested in "Jom Pandu"? It's an autocross session organised by a few MR2/MRS owners. Any car can participate.If you guys are in your RX8, I'll bring mine too
Date: 8JUL07
Time: Morning till Evening
Venue: Nilai Huge Car Park - More details later
Give me a call 012-3851274.
Date: 8JUL07
Time: Morning till Evening
Venue: Nilai Huge Car Park - More details later
Give me a call 012-3851274.
#1424
RE雨&
Join Date: Jun 2006
Location: Kuala Lumpur, Malaysia
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
There is also another event. GRA on 15JUL07.
Date : 15JUL07
Time : 8.00 am till 5.00 pm
Venue : Most likely Shah Alam stadium car park (next to go-kart track)
Price : RM 150 for Grass Class + RM 10 competition fee
Runs : 1 practice + 3-4 Timed Runs
What else you get? A goody bag and a whole lotta fun.
Sponsors are BFGoodrich/ Meguairs/ Redline...etc
Let me know if you guys are keen. We can go signup together.
Date : 15JUL07
Time : 8.00 am till 5.00 pm
Venue : Most likely Shah Alam stadium car park (next to go-kart track)
Price : RM 150 for Grass Class + RM 10 competition fee
Runs : 1 practice + 3-4 Timed Runs
What else you get? A goody bag and a whole lotta fun.
Sponsors are BFGoodrich/ Meguairs/ Redline...etc
Let me know if you guys are keen. We can go signup together.
#1425
Registered User
Join Date: Jan 2005
Location: Malaysia
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Lennon - Couldn't tahan the CEL. So i pop by C&C Mazda Service Centre. Apparently, it was my engine oil sensor wire putus. So they soldered it back and the CEL also hilang. I asked about the PT no. but the mech had gone home. I'll call tomorrow to check the PT number so that I can cross-reference with my Workshop manual at home. Really want to buy the scangauge liao.
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?
Voyager - How you tahan the CEL light for months? The PCM won't allow speeds above 50-60km/h and the acceleration also damn slow.
Boy - Thanks for the concern. Any luck with your engine rebuild?