I DIY this over the weekend with the help from my brother. What you guys think?
Sorry for the bad quality of the pictures, coz it was taken with my o2 mini (Bad during the nite), will try to get a better shots when i get hold of my Digital Camera.

 

is that supposed to be the night rider, singapore style?
good work!

 

Hey, that looks like the Flux Capacitor from Back to The Future....

Does it works?

Can tompang me back to last Friday ------ become the 10th winner?

 

Cool .... a night rider .... :-)

Btw which body kit did you install? Its nice !

Regards,
Drifter

 

Care to share your DIY with instructions?
I've been wanting to do this for months now but I haven't found suitable LED's
Thanks!
Al

 

If it works, then i bring myself back to last friday and be the 10th, and tompang u with me to be the 11th

 

I am using KS Auto Burnout Kits.

 

err... i dun have any hardcopy instructions :-
I will just go step by step, how i do it :-

1. I bought 3 red LED lights (Glued together with a waterproof kind of Silicon Glue, Wrap it further to prevent water sipping in) ** This is very important, if not, once water gets in, the LED will be gone (Short Circuit)
2. Uses some tape & glue to secure just above the V crest (notice exactly above the V crest, there's a hole, just nice to secure the LED lights there)
3. Then connect the wire to the headlights (so, when u on your side or headlights, the LED will lights up) - look at the manual how to connect to the headlights, if not many pple will think that they need to remove the front bumper.

Hope this helps. Cheers

 

your parking lot looks damn cramped bro, how you managed to squeeze in to the driver's side?

 

OH, was at my mom's place when i took the pictures. No problem getting in and out from the driver's side

 

Hey Watoke,
Thanks for the info

 

ur kit looks sweet bro...correct me if i'm wrong: abt half coke can height from ground?
problems with the humps and the usual low nonsense on the roads? curious, because its headache for me still, but a small sacrifice for a nicer outlook....=)

cheers!

 

Probably around the level of the height, hmm....not much of the problems with the humps (except a few extremely high humps). Again try going thru it with zig zag way ...sometimes still hits
BUt the under bracer keep getting hit ....

 

for me its the front, exhaust piping below, dummy cat and finally the exhaust....
actually, the front bumper gets hit first.....*sighz*

the things we endure for the looks of our rides.....