DIY over the weekend, what u guys tink?
3 Attachment(s)
I DIY this over the weekend with the help from my brother. What you guys think?
Sorry for the bad quality of the pictures, coz it was taken with my o2 mini (Bad during the nite), will try to get a better shots when i get hold of my Digital Camera. :) |
is that supposed to be the night rider, singapore style?
good work! |
Hey, that looks like the Flux Capacitor from Back to The Future....
Does it works? Can tompang me back to last Friday ------ become the 10th winner? :D: :D: :D: |
Cool .... a night rider .... :-)
Btw which body kit did you install? Its nice ! Regards, Drifter
Originally Posted by watoke
I DIY this over the weekend with the help from my brother. What you guys think?
Sorry for the bad quality of the pictures, coz it was taken with my o2 mini (Bad during the nite), will try to get a better shots when i get hold of my Digital Camera. :) |
Care to share your DIY with instructions?
I've been wanting to do this for months now but I haven't found suitable LED's Thanks! Al |
Originally Posted by Orr-Beh
Hey, that looks like the Flux Capacitor from Back to The Future....
Does it works? Can tompang me back to last Friday ------ become the 10th winner? :D: :D: :D: |
Originally Posted by Drifter
Cool .... a night rider .... :-)
Btw which body kit did you install? Its nice ! Regards, Drifter |
Originally Posted by EyeBall Fixer...(o)(x)
Care to share your DIY with instructions?
I've been wanting to do this for months now but I haven't found suitable LED's Thanks! Al I will just go step by step, how i do it :- 1. I bought 3 red LED lights (Glued together with a waterproof kind of Silicon Glue, Wrap it further to prevent water sipping in) ** This is very important, if not, once water gets in, the LED will be gone (Short Circuit) 2. Uses some tape & glue to secure just above the V crest (notice exactly above the V crest, there's a hole, just nice to secure the LED lights there) 3. Then connect the wire to the headlights (so, when u on your side or headlights, the LED will lights up) - look at the manual how to connect to the headlights, if not many pple will think that they need to remove the front bumper. Hope this helps. Cheers :) |
Originally Posted by watoke
I DIY this over the weekend with the help from my brother. What you guys think?
Sorry for the bad quality of the pictures, coz it was taken with my o2 mini (Bad during the nite), will try to get a better shots when i get hold of my Digital Camera. :) your parking lot looks damn cramped bro, how you managed to squeeze in to the driver's side? :wiggle: |
Originally Posted by jondog
your parking lot looks damn cramped bro, how you managed to squeeze in to the driver's side? :wiggle:
|
Originally Posted by watoke
err... i dun have any hardcopy instructions :-
I will just go step by step, how i do it :- 1. I bought 3 red LED lights (Glued together with a waterproof kind of Silicon Glue, Wrap it further to prevent water sipping in) ** This is very important, if not, once water gets in, the LED will be gone (Short Circuit) 2. Uses some tape & glue to secure just above the V crest (notice exactly above the V crest, there's a hole, just nice to secure the LED lights there) 3. Then connect the wire to the headlights (so, when u on your side or headlights, the LED will lights up) - look at the manual how to connect to the headlights, if not many pple will think that they need to remove the front bumper. Hope this helps. Cheers :) Thanks for the info :) |
ur kit looks sweet bro...correct me if i'm wrong: abt half coke can height from ground?
problems with the humps and the usual low nonsense on the roads? curious, because its headache for me still, but a small sacrifice for a nicer outlook....=) cheers! |
Originally Posted by jondog
ur kit looks sweet bro...correct me if i'm wrong: abt half coke can height from ground?
problems with the humps and the usual low nonsense on the roads? curious, because its headache for me still, but a small sacrifice for a nicer outlook....=) cheers! BUt the under bracer keep getting hit .... :crying: |
for me its the front, exhaust piping below, dummy cat and finally the exhaust....
actually, the front bumper gets hit first.....*sighz* the things we endure for the looks of our rides..... |
All times are GMT -5. The time now is 04:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands