Taking the 8 out of winter storage
Registered
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
shitty deal....can you take a pic and post it? You can always try posting a thread in the maintenance part of this site and see if any one else has come across this problem. New to me. An opened wrench can't get a hold of it?
I managed to get the last clip off. My socket wrench is too short to get the the top bolt, realized I have 2 bolts left. And its hitting the starter module when I try to take it off. Searching for my screw driver socket. But the last bolt is gonna **** me. The area is too crapped to get a pry bar in with too many expensive modules that I dont wanna mess up. Will post a pic in a sec.
well good news and bad news, i got the module off the clutch pedal assembly in one piece, its a ******* ford piece, aholes
the last bolt, looks like its staying there, the welds broke off the last bolt, so i dont know if my pedal is reused, I HOPE IT IS, so just that last bolt to get at, had to come inside to get warm, Ya, Im doing this outside on the driveway.
FU MAZDA CANADA
the last bolt, looks like its staying there, the welds broke off the last bolt, so i dont know if my pedal is reused, I HOPE IT IS, so just that last bolt to get at, had to come inside to get warm, Ya, Im doing this outside on the driveway.
FU MAZDA CANADA
no work space, wall faces the driver side' i had to bend more than I ever could
got IT OFF THOU!!!
but maybe fucked, the piece that broke off fell behind the firewall along with the bolt, no worres about the bolt, dont know if i need that piece thou, might have to go fishing with a magnet
post pics of the wonderful pedal
got IT OFF THOU!!!
but maybe fucked, the piece that broke off fell behind the firewall along with the bolt, no worres about the bolt, dont know if i need that piece thou, might have to go fishing with a magnet
post pics of the wonderful pedal
ya, costco does not do speicla order, and sams club is gone, went to walmart, my sister has hook ups at partssource, so might see if they can get it for me, if not, her friends mom works at walmart, so employee discount at 15%, just need to hand her the recipiet
Registered
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
Not sure about part source, weird costco can't order it.
Yup that's the same place I saw on another posting where they break. So gay, that should be a recall man, so unsafe. Easy welding job tho. Take it to any shop and they should be able to weld it back together in 5 min.
You could always try duct tape
Yup that's the same place I saw on another posting where they break. So gay, that should be a recall man, so unsafe. Easy welding job tho. Take it to any shop and they should be able to weld it back together in 5 min.
You could always try duct tape
Mon May 29 2006
Joined: Aug 2005
Posts: 711
Likes: 0
From: Richmond Hill, Ontario
Hey guys, well the end of winter is 3 weeks away and i'm already thinking about what i have to do to get her ready for the road again. This is the first time i've put her away for the winter and i'm going on common sense for what i have to do in the spring.
When i put the car away i had the oil changed, really gave the car a good cleaning inside and out, over inflated the tires (to just under limit), pulled the battery and put it on a trickle charger, then rolled the car in the garage, put a car cover on her and closed the door.
When i take her out in the spring I'm going to lower the tire pressure, obviously put the battery back in, then get the oil changed again (is that necessary???).
Let me know if i'm doing anything wrong!!!
Thanks
When i put the car away i had the oil changed, really gave the car a good cleaning inside and out, over inflated the tires (to just under limit), pulled the battery and put it on a trickle charger, then rolled the car in the garage, put a car cover on her and closed the door.
When i take her out in the spring I'm going to lower the tire pressure, obviously put the battery back in, then get the oil changed again (is that necessary???).
Let me know if i'm doing anything wrong!!!
Thanks
Thread Starter
Registered User
Joined: Oct 2008
Posts: 994
Likes: 0
From: Oakville, ON
Besides that i'm going to get her ready in a couple of weeks, but keep my winter beater insured till the end of april. That way i'm covered if we get more of the "white death" in early april!!!
Thread Starter
Registered User
Joined: Oct 2008
Posts: 994
Likes: 0
From: Oakville, ON
Well it's done, my 8 has been woken from its long winter sleep. Took the cover off, lowered the tire pressure, popped the battery in and......... SHE FIRED RIGHT UP!!!! Just got back from an hour long drive!!!! Ahhhhhhh thats better
Thread
Thread Starter
Forum
Replies
Last Post
Fickert
Series I Major Horsepower Upgrades
7
Sep 9, 2015 01:21 PM
Tsurugi
New Member Forum
0
Sep 7, 2015 08:27 PM
