Notices
Canada Forum For our friends up North, eh!

Racing Beat Screens Installed

Thread Tools
 
Rate Thread
 
Old Dec 8, 2007 | 11:19 AM
  #1  
zerobio's Avatar
Thread Starter
Atomic 8
 
Joined: Sep 2007
Posts: 884
Likes: 0
From: London, Ontario
Racing Beat Screens Installed

Finally got the 3 screens (2 oil coolers, 1 a/c and radiator screen) and got them installed. I decided because of the snow, I didn't want to drive out to Aurora to have them done (sorry, next mod RPM, I promise) and had mazda do it.

Feeling much better with the added protection as I was already getting a little oil cooler damage even after just 4 months ownership.
Reply
Old Dec 8, 2007 | 11:45 AM
  #2  
DarkBrew's Avatar
Extraordinary Engineering
 
Joined: Oct 2005
Posts: 4,733
Likes: 14
From: Burls On
Good to hear.
BTW, RPM is in Breslau
Reply
Old Dec 8, 2007 | 12:09 PM
  #3  
zerobio's Avatar
Thread Starter
Atomic 8
 
Joined: Sep 2007
Posts: 884
Likes: 0
From: London, Ontario
Oh yeah, right. Don't know why I keep saying Aurora. Thanks man.
Reply
Old Dec 8, 2007 | 02:28 PM
  #4  
TurboEight's Avatar
Booost.
iTrader: (1)
 
Joined: Nov 2006
Posts: 1,099
Likes: 1
From: Markham/Richmond Hill/Toronto
Good stuff!!

It's worth it!!..
Reply
Old Dec 8, 2007 | 10:43 PM
  #5  
qtwre's Avatar
Registered User
iTrader: (1)
 
Joined: Jan 2007
Posts: 703
Likes: 0
From: Mississauga, ON
*cough*no it isn't*cough* :P
Reply
Old Dec 9, 2007 | 07:49 AM
  #6  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,638
Likes: 7
From: Stouffville, Ontario, Canada
I remember QTWRE saying to me how he doesn't want it because it ruins the aggresive look of the oil coolers.
Reply
Old Dec 9, 2007 | 07:54 AM
  #7  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,638
Likes: 7
From: Stouffville, Ontario, Canada
BTW, ZEROBIO, when I looked into the lower front opening of the car, I already find some sort of a factory installed screen for the A/C condenser. Doesn't yours have that already too? We're both 2007. Also, if you did have it, wouldnt' you now have two layers of protection?
Reply
Old Dec 9, 2007 | 08:15 AM
  #8  
smokinrx-8's Avatar
Registered User
 
Joined: Aug 2007
Posts: 2
Likes: 0
cold air intake

does anyone know if the Racing Beat Ram Air Duct will work with the RX-8 AEM cold air intake or do i need 1 at all even just to give me a 3hp gain or engine cooling
Reply
Old Dec 9, 2007 | 08:33 AM
  #9  
Gecko69's Avatar
Registered
 
Joined: Jan 2007
Posts: 417
Likes: 1
From: Kingston,Ontario, Canada
Originally Posted by smokinrx-8
does anyone know if the Racing Beat Ram Air Duct will work with the RX-8 AEM cold air intake or do i need 1 at all even just to give me a 3hp gain or engine cooling
Ummmmmm?????...the RB air duct is designed to connect where the stock or RB intake spot is( oval opening on the side of the intake box that faces the front of the car ).......the AEM cold air intake comes down behind the front bumper . behind where the front licence plate is, it completely eliminates the air box or the need for a ram air duct.

Last edited by Gecko69; Dec 9, 2007 at 08:51 AM.
Reply
Old Dec 9, 2007 | 08:35 AM
  #10  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Yep, the Ram air might make sense for those with the tube and filter in the bay, but for those that have it down in the bumper...........it would defeat the purpose.
Reply
Old Dec 9, 2007 | 09:08 AM
  #11  
zerobio's Avatar
Thread Starter
Atomic 8
 
Joined: Sep 2007
Posts: 884
Likes: 0
From: London, Ontario
Originally Posted by Footman
BTW, ZEROBIO, when I looked into the lower front opening of the car, I already find some sort of a factory installed screen for the A/C condenser. Doesn't yours have that already too? We're both 2007. Also, if you did have it, wouldnt' you now have two layers of protection?
Good point, Footman. I didn't expect it to be there after seeing various installation pics but apparently that small a/c condenser screen is there since '07. I had it removed and the RB one installed instead. The RB screen covers the a/c area and rad whereas the smaller one was just for a/c and it has bigger mesh than the RB screen.

As for the agressive look of the oil coolers, I think it looks even nicer with the screens there. But maybe that's a combination of looks and feeling a bit more confident that they're protected somewhat.
Reply
Old Dec 9, 2007 | 09:17 AM
  #12  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Originally Posted by zerobio
Good point, Footman. I didn't expect it to be there after seeing various installation pics but apparently that small a/c condenser screen is there since '07. I had it removed and the RB one installed instead. The RB screen covers the a/c area and rad whereas the smaller one was just for a/c and it has bigger mesh than the RB screen.

As for the agressive look of the oil coolers, I think it looks even nicer with the screens there. But maybe that's a combination of looks and feeling a bit more confident that they're protected somewhat.
My 05 had it there and obviously I took it out when the RB went in.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RenzoRx-8
RX-8 Parts For Sale/Wanted
1
Aug 25, 2015 10:29 PM
motohegg
RX-8 Discussion
2
Aug 23, 2015 08:14 AM
PTQLam
Series I Aftermarket Performance Modifications
4
Aug 16, 2015 05:40 PM
RXeckless
RX-8's For Sale/Wanted
6
Aug 16, 2015 12:51 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:13 AM.