Autoexe Adjustable Endlink
09-29-2007, 03:01 AM
#1
New Member
Thread Starter
Autoexe Adjustable Endlink
I have installed those endlink from Autoexe, they can be adjusted from 90mm to 104mm (104 is the stock height).
It is to level out the stabilizer bar when you have lowered your car. Explain with simple graphics below.
1. Normal height 2.When lowered 3.What does the shorter endlink do to a lowered car
As you can see the forces going through the stabilizer bar (when the car is lowered) is not as effective as they are level out. I have noticed the car sway when I have adjusted the coilover lower and lower, so to get the right set up. After corner balancing, I really need this link to gain more from the stabilizer bar. The good thing about its adjustability is that I can measure and adjust so the bolt on the endlink are not in an angle anymore. Hopefully I have set the head in the middle so that the stabilizer bars will work at its best.
I have barely notice any difference just driving on the road, and it probably shows only when I drive harder.
It is to level out the stabilizer bar when you have lowered your car. Explain with simple graphics below.
1. Normal height 2.When lowered 3.What does the shorter endlink do to a lowered car
As you can see the forces going through the stabilizer bar (when the car is lowered) is not as effective as they are level out. I have noticed the car sway when I have adjusted the coilover lower and lower, so to get the right set up. After corner balancing, I really need this link to gain more from the stabilizer bar. The good thing about its adjustability is that I can measure and adjust so the bolt on the endlink are not in an angle anymore. Hopefully I have set the head in the middle so that the stabilizer bars will work at its best.
I have barely notice any difference just driving on the road, and it probably shows only when I drive harder.
10-01-2007, 06:04 AM
#5
New Member
Thread Starter
10-01-2007, 06:33 PM
#8
New Member
Thread Starter
No they don't but these can be used for MazdaSpeed spring. If I remember correctly you drop 20mm in the front for MS springs, from the table provided with these links. You can adjust it to 92mm and you will be right.
10-02-2007, 02:57 AM
#9
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
10-02-2007, 02:58 AM
#10
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Sorry if this is a dumb question but it is just rears, correct?
10-02-2007, 08:35 AM
#12
New Member
Thread Starter
03-20-2008, 11:06 AM
#15
www.EVO-R.Net
iTrader: (2)
Join Date: Jun 2004
Location: New York
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Awsome stuff. Guys we got our stuff from Autoexe's factory direct. Our is even better than Autoexe. Our center tube link is made of #6 Aluminum. Our kit also includes the rear. Pics!
03-20-2008, 05:04 PM
#17
New Member
Thread Starter
Hi to New York.
What are the ones in the bottom 2 ...? Please explain...
The head is totally from autoexe and they are well manufactured product.
What are the ones in the bottom 2 ...? Please explain...
The head is totally from autoexe and they are well manufactured product.
03-20-2008, 09:35 PM
#18
www.EVO-R.Net
iTrader: (2)
Join Date: Jun 2004
Location: New York
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Yep, these came out of same factory as Autoexe's supplier. The bottom 2 are for the rear stabilizer end links. We sale them as a package. But if you just need the rears I can get them to you too.
03-22-2008, 06:40 PM
#21
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
I'm also of the view that having everything 'straight' down there is less likely to lead to component fatigue in the long term and thus help stave of the inevitable rattles, etc as suspension ages.
03-23-2008, 05:04 AM
#25
Hmmmmmm.........
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
No mate. I have been meaning to for a while but between the turbo being fitted and work I havent gotten around to it.
I am trying to find the evo-r links on their website but between my optus cable being slower than dial up and their website design I cant seem to find any details.
Cheers
Andrew
I am trying to find the evo-r links on their website but between my optus cable being slower than dial up and their website design I cant seem to find any details.
Cheers
Andrew