Notices
SE RX-8 Forum Serving NC, SC, GA, FL, AL, TN

Anyone in Central Florida intimately familiar with the Greddy Turbo?

Thread Tools
 
Rate Thread
 
Old Jan 21, 2006 | 02:29 PM
  #1  
epitrochoid's Avatar
Thread Starter
Riot Controller
 
Joined: Jan 2004
Posts: 2,142
Likes: 0
From: Orlando, FL
Anyone in Central Florida intimately familiar with the Greddy Turbo?

Next week I'll be ordering my turbo kit. I've got a tight budget to perform this operation, in order to save cash for incidental expenses, i've decided to install the kit myself. Also I want to have first hand knowledge of the system in the event there are problems down the road, or if I want to upgrade or replace parts. I've got a good sized garage with a decent set of both hand and air tools. I've done alot of work on hondas and 240's (me and a friend swapped an sr20 and changed cams with absolutely no previous experience with that type of work, and I've also helped my roomate change the engine mounts in his caddy..not that that has anything to do with an RX8), but I have yet to do anything like that on my car. Time is not really an issue, as the car can stay in the garage as long as it needs too, but I can't have any major issues with the install that could pose a risk to the engine or other systems in the car. Ideally, I'd like to have it properly running (or at least really close) inside of 3 days since I have a long weekend next weekend and if I wait any longer, I'll be too busy with school until late summer this year.

I've talked to a few guys around here that are willing to help, and for that I am greatly thankful, but I'm looking to see if anyone has hands on experience with this kit. I can put you up in my house for the weekend, feed you, beer you, or whatever else you'd like as compensation (I will not however give anyone a sponge bath or anything lol).

I've read every post in every thread about the kit on here, and i feel mentally prepared, but it never hurts to have another brain in the garage.
Reply
Old Jan 22, 2006 | 11:56 AM
  #2  
Mantis's Avatar
Registered User
 
Joined: Dec 2004
Posts: 390
Likes: 0
From: Riverview, Florida
Epi, Loube has the greddy turbo that Scott at Mazsport has been working on for the past year. He (Loube) lives in Tampa and would probably be able to answer any questions you might run across.

EvilMiata will be installing his turbo into his RX-8 at our house in the next week or so. He and my husband both have installed turbo Miatas and are very comfortable with the whole install. I am sure that if you want to come over and assist in their turbo install it would help you with yours, or they could do the same for you. ****, we could do them at the same house for S & G. Anyway, PM me and I will give you their numbers to talk a bit more about it.

Congrats! I can't wait to hear it!
Reply
Old Jan 22, 2006 | 12:35 PM
  #3  
epitrochoid's Avatar
Thread Starter
Riot Controller
 
Joined: Jan 2004
Posts: 2,142
Likes: 0
From: Orlando, FL
loube used to be next door neighbors with my best friend of 19 years..him and i have talked alot in the past about turbos. he had the install perform by a shop though. what day is evil miata doing the install? if i can, I'd like to come down, but the weekdays are completely shot for me until august. i also can't take my car anywhere because i have a stupid shard of metal in my sidewall, and until I can find a used pilot sport 2 to replace it with, I can only drive for about 20 minutes before it goes flat
Reply
Old Jan 22, 2006 | 08:11 PM
  #4  
Tremor's Avatar
Black Like Sunday
 
Joined: May 2005
Posts: 93
Likes: 0
From: Bartow, FL
Originally Posted by Mantis
EvilMiata will be installing his turbo into his RX-8 at our house in the next week or so. He and my husband both have installed turbo Miatas and are very comfortable with the whole install. I am sure that if you want to come over and assist in their turbo install it would help you with yours, or they could do the same for you. ****, we could do them at the same house for S & G. Anyway, PM me and I will give you their numbers to talk a bit more about it.
Is this another scheduled Tech session??? I will assist if the guys want some help...

Tremor
Reply
Old Jan 24, 2006 | 07:46 AM
  #5  
evilmiata's Avatar
Registered User
 
Joined: Nov 2005
Posts: 282
Likes: 0
From: Apollo Beach, FL
I'm planning on moving in with Mantis and 2ndshit (I can't believe it took me that long it think of that one! I kill me!) this weekend to bang out my computer install. We'll be replacing the whole fuel system, so it should be a nice opportunity to better understand the Renesis.

Epitrochoid, you're welcome to come along and help. If you're 8 can't make it, take the Model A!!!!!! You're website is down and I'm pissed that I can't see pictures of it!
Reply
Old Jan 24, 2006 | 09:27 AM
  #6  
Mantis's Avatar
Registered User
 
Joined: Dec 2004
Posts: 390
Likes: 0
From: Riverview, Florida
Ha ha, funny man.

I was going to the meet on Sat nite in Orlando, but this sounds like we might actually be working on his car! Thought that day would never come!
Reply
Old Jan 24, 2006 | 12:50 PM
  #7  
epitrochoid's Avatar
Thread Starter
Riot Controller
 
Joined: Jan 2004
Posts: 2,142
Likes: 0
From: Orlando, FL
sorry about the site...i got on the 1 year 50gb storage, 5gig/xfer for 12 months for $9 deal..and now it's expired and they want $120.

Once I stop being lazy im going to set up a server on my linux box so I have complete control [evil]hahahahahaa[/evil]

...and it looks like mazsport is going to be doing my install after all. They warranty their work and Scott's worked me a pretty good deal. I think me and my roomate are going to come down on Sunday though and give you guys a hand...or at least some comic relief lol.
Reply
Old Jan 24, 2006 | 01:01 PM
  #8  
Mantis's Avatar
Registered User
 
Joined: Dec 2004
Posts: 390
Likes: 0
From: Riverview, Florida
Free is betta.
Reply
Old Jan 24, 2006 | 01:23 PM
  #9  
guy321's Avatar
Humpin legs and takin nam
 
Joined: Nov 2003
Posts: 2,433
Likes: 0
From: Clearwater, Fl
No, but I am intimately familiar with chicken anatomy, if you ever need assistance with that..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
Jun 14, 2022 08:32 AM
galognu
Rotary Swaps
138
Nov 16, 2020 05:20 AM
JimmyBlack
Series I Major Horsepower Upgrades
273
Feb 10, 2020 10:23 PM
ShellDude
RX-8 Parts For Sale/Wanted
5
Oct 1, 2015 09:55 PM
MolecularConcept
RX-8 Discussion
11
Sep 29, 2015 09:21 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:50 AM.