Does anyone make a 3" 3 or 4 point harness?

3" is much more comfortable than 2".

The use is for autocross so a 5 point isn't really necessary.

Thanks

SOLO

Every company makes a 3 inch lol...go on ebay and you can find harnesses all day. Sparco makes 3 inch all day:banghead::banghead::banghead:

What kind of seat are you running?

Stock seats.

Jim

How are you anchoring the harnesses? Do you have a 4 pt roll bar installed or anything for the shoulder belts? Are you anchoring the laps belts to the floor board? Only reason I ask, is cuz it's a real bad idea to run a harness if it's not installed properly. You would get hurt more from running an improperly installed vs a the stock seat belt if something should happen out on the course.

The speeds of auto x are slower than HPDE otherwise I wouldn't recommend this but a belt like the one below can bolt into an 8 using the OEM rear seat floor mounts and the rear child seat LATCH anchors.

http://static.summitracing.com/global/images/prod/large/bob-50502-16-234.jpg

DO SO AT YOUR OWN RISK!