{ FS } Turblown top mount and accessories
#1
Turblown top mount and accessories $2500
LOCAL SALE: San Diego CA
The Turbo was custom fitted on a Series 1 manual but fit my automatic just fine. It has a few thousand miles on it but has shaft play. I did not measure it but the car was boosting fine @ 10 lbs before removal. My friend who inspected the turbo said it would need to be rebuilt. Eliot at Turblown.net said a full rebuild with bearings would cost $400 and include a warranty and be basically brand new.
Chris @ Turblown custom fits them to the vehicle before shipping. The attached thumb is my actual turbo fitted on a Series 1 manual.
http://www.turblown.net/store/index.php?productID=81
It should be everything you need for 425rwp minus black halo coils, fuel pump possibly, colder plugs and upgraded radiator. Click the link for more info. I had my COB AP tuned at MM in Arizona. Vehicle shipping was ~$350. Turbo kit = $6500 + $4000 accessories = $10,000 Total value. $2500 should be fair considering the turbo needs $400 in repair work and the AP is cracked
Turblown kit details:
1) A water cooled Garrett Gt35R journal bearing hybrid turbocharger
2) Our 3 into 1 custom made heavy wall 304SS turbo manifold
3) A TurboSmart 40mm vband wastegate.
4) A 3" 304SS downpipe that employs a 3" flex bellow for engine movement.
5) Custom Stainless oil & coolant feed/return hard lines are included
6) A custom fabricated front mounted intercooler using a genuine Garrett Core.
7) includes required piping, T-bolt clamps, and high quality silicone couplers.
8) An oil metering pump block off kit & relocation bracket.
9) A coolant reserve tank relocation bracket. (? I may have just used my own method)
10) A protective 3M Gentex wiring harness thermal sleeve.
11) A custom aluminum thermostat upper and lower hard line assembly is included
12) An ambient air intake system featuring a recirculated blow off valve
13) I might still have the 9 leading spark plugs
14) NEXUS TRANS TEMP 100-260
15) NEXUS OIL TEMP 140-300 F
16) NEXUS BST/VAC 30HG/30PSI
17) Racing Beat Ash Tray Gauge Pod
18) Turblown Turbo Housing Heat Shield + inconel shield
19) Rotary Performance ‘Supercat’ Mid Pipe
20) Turblown Injector Dynamics ID2000
21) Turblown AEM Water/Meth Injection
22) Boost a pump
23) COB Access Port
The Turbo was custom fitted on a Series 1 manual but fit my automatic just fine. It has a few thousand miles on it but has shaft play. I did not measure it but the car was boosting fine @ 10 lbs before removal. My friend who inspected the turbo said it would need to be rebuilt. Eliot at Turblown.net said a full rebuild with bearings would cost $400 and include a warranty and be basically brand new.
Chris @ Turblown custom fits them to the vehicle before shipping. The attached thumb is my actual turbo fitted on a Series 1 manual.
http://www.turblown.net/store/index.php?productID=81
It should be everything you need for 425rwp minus black halo coils, fuel pump possibly, colder plugs and upgraded radiator. Click the link for more info. I had my COB AP tuned at MM in Arizona. Vehicle shipping was ~$350. Turbo kit = $6500 + $4000 accessories = $10,000 Total value. $2500 should be fair considering the turbo needs $400 in repair work and the AP is cracked
Turblown kit details:
1) A water cooled Garrett Gt35R journal bearing hybrid turbocharger
2) Our 3 into 1 custom made heavy wall 304SS turbo manifold
3) A TurboSmart 40mm vband wastegate.
4) A 3" 304SS downpipe that employs a 3" flex bellow for engine movement.
5) Custom Stainless oil & coolant feed/return hard lines are included
6) A custom fabricated front mounted intercooler using a genuine Garrett Core.
7) includes required piping, T-bolt clamps, and high quality silicone couplers.
8) An oil metering pump block off kit & relocation bracket.
9) A coolant reserve tank relocation bracket. (? I may have just used my own method)
10) A protective 3M Gentex wiring harness thermal sleeve.
11) A custom aluminum thermostat upper and lower hard line assembly is included
12) An ambient air intake system featuring a recirculated blow off valve
13) I might still have the 9 leading spark plugs
14) NEXUS TRANS TEMP 100-260
15) NEXUS OIL TEMP 140-300 F
16) NEXUS BST/VAC 30HG/30PSI
17) Racing Beat Ash Tray Gauge Pod
18) Turblown Turbo Housing Heat Shield + inconel shield
19) Rotary Performance ‘Supercat’ Mid Pipe
20) Turblown Injector Dynamics ID2000
21) Turblown AEM Water/Meth Injection
22) Boost a pump
23) COB Access Port
Last edited by von; 07-08-2015 at 01:36 PM.
#10
For sale again, but I'm parting out this time. I only have the Turbo, Manifold and some misc piping and accessories
Please come take a look. I'm within the San Diego 92101 area
Please come take a look. I'm within the San Diego 92101 area
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
ShellDude
RX-8 Parts For Sale/Wanted
5
10-01-2015 09:55 PM