{ FS } Volk GT7 wheels
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Northern, VA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Volk GT7 wheels
Category: Wheels & Tires
Price: $1000
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series II
Item Condition: Used
They are staggered, 19x8.5 fronts and 19x9.5 rears. They come with tires mounted but they need to be replaced. They are not perfect, some curb rash here and there but nothing big. I will post some detailed pics and the offsets when I get home tonight.
I would prefer not to ship them since shipping will be a lot, but we can work something out if needed. These have been sitting in my garage for a few months now and I need some more room.
#3
Registered
Thread Starter
Join Date: Jul 2006
Location: Northern, VA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I had to run spacers in the front because of the brakes, but the tires are 245/35/19 for the front and 275/30/19 on the rear. I had to roll the rear fenders a little bit when I had the coilovers on it.
Also, the speedometer reads ~1 mph slower than stock.
Also, the speedometer reads ~1 mph slower than stock.
#4
I LuV mY Rotary....
iTrader: (10)
Join Date: May 2007
Location: killADelPhia
Posts: 3,408
Likes: 0
Received 0 Likes
on
0 Posts
can you post more pics, or e-mail me pics at lepichichi@hotmail.com
#5
Registered
Thread Starter
Join Date: Jul 2006
Location: Northern, VA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I posted some high res photos at http://gallery.me.com/jonbrose#100078.
One of the fronts has has a small scratch on one of the spokes and one of the rears has about 6 inches of curb rash, but its not too bad. All of them could use some new decals. If someone really wants them for $1000, I may look in to getting them for you.
I do still need to clean them.
The decals for the offsets are not there but they have 168mm backspacing.
[EDIT] I calculated that the offset for the front is +46 and the rear is +36. Not sure if anyone can confirm this but these are the sizes that I found listed for these wheels.
One of the fronts has has a small scratch on one of the spokes and one of the rears has about 6 inches of curb rash, but its not too bad. All of them could use some new decals. If someone really wants them for $1000, I may look in to getting them for you.
I do still need to clean them.
The decals for the offsets are not there but they have 168mm backspacing.
[EDIT] I calculated that the offset for the front is +46 and the rear is +36. Not sure if anyone can confirm this but these are the sizes that I found listed for these wheels.
Last edited by jonbro6956; 06-18-2010 at 07:01 AM.
#18
Registered
Thread Starter
Join Date: Jul 2006
Location: Northern, VA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
These are still available. They are just sitting in my garage collecting dust. Looks like I need to post the high res photos when I get home tonight.
#20
Registered User
iTrader: (3)
Join Date: Feb 2011
Location: las vegas
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
can you give me your personal thoughts on the project mu bbk? hows the stopping power with them? how much are replacement pads and how often are you needing to change them?
thanks
thanks
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM
RAVSPEC
Vendor Classifieds
0
10-01-2015 01:59 PM
GranTouTou
Series I Wheels, Tires, Brakes & Suspension
0
09-30-2015 06:11 AM