Rotary__Rocket

Category: Steering & Suspension
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I, Series II
Location (US State/Canada/Int): CA
Item Condition: New

For the rest of pictures, please go to { FS } Tastefully Modded Low Miles WWP GT Rx8 For sale (Lots of Pics) - RX8Club.com

Unfortunately, it is time to move on. So I will have to go separate way with my 8.
Most of the parts will be off the car either this weekend or the next (5/11 or 5/18).
I am trying to do a photo shoot before I take parts off the car...

However, for parts that need swap will be still on the car, so pm me if you have question.
Let me know if you need any specific pictures or if I miss anything.
For all the small items I am able to ship, send me your zip code, so I can get you a quote in the same time.

Some quick rules (Sorry if I sound mean):
1. Dont call "dibs". I wont care whatever that means, it'll just make the thread longer. PM me, we'll start from there.
2. Dont dibs or make offer on parts not listed yet. I know some of you know what parts I have on my car. If its not listed, then its not for sale yet. And I probably cant keep track on who offered on what after a few months.
3. Lowballs. I do believe I price my stuff pretty good, so dont lowball me. It'll simply be ignored.
4. Local pickup has TOP PRIORITY. Some of the stuff is pretty small and easy to ship, but I really dont wanna go thru all the packing and shipping hassle. Im at CA 91765
5. Cash or money order plz. Paypals will be 3% extra. (Since local pickup is top priority, I guess Paypal shouldnt be needed?)
6. First paid, first served. Im going to honor people that is able to pay me first to have top priority. Some of you guys may be the first to PM me etc, I'll try my best to accomdate, but if somebody else is able to come by, pay and pick up immediately, I will honor those first. Sorry

Body:
Authentic MazdaSpeed Front Bumper (came painted WWP)------------------need your stock+500
Authentic MazdaSpeed Side Skirt (came painted WWP)--------------------- 500
Custom (JRX Rotary) Carbon Fiber Rear Mazdaspeed under Spoiler-----------need your stock+500

I am only willing to swap WWP bumper. Thank you.

Engine (Performance):
BHR Ignition Upgrade ------------------------------------------------------sold
HKS Legamax Catback Exhaust---------------------------------------------sold

Suspension:
Racing Beat Front and Rear Sway Bar----------------------------------------250
Tein Flex with EDFC (In car control stiffness of the suspension)---------------sold
AutoExe Front & Rear Strut Bar---------------------------------------------450
link strut bar brand new is 750 plus shipping from japan
AP Racing Endlink, Front & Rear---------------------------------------------hold
AP Racing Big Brake Kit Front only with Mintex Pad-----------------------------need your stock rotor+1300
STILLEN : AP Racing AP Racing 4-Piston Big Brake Kits
STILLEN : Mintex Xtreme High Performance Brake Pads
Advan RG2 18x9 +35 Offset,
with 3000 miles old Yokohama ADVAN Neova AD08 255/35/18 (90% left)------sold

Interior:
Bride Zeta III seat rail bracket mount FG-type---------------------------------sold
(and I do have the original box from bride)
Defi Water Temperature Gauge-----------------------------------------------hold
Takata Seat Belt Harness with Shoulder Pad(Used for 5 Times)----------------300

Rotary__Rocket

Update 5-15.

Basically I am showing the defects for the body kit, if its not in picture, its in good condition. i will say front bumper has a few rock chip in the lower potion, plus that 2 crack. (FYI, the crack was with the kit for around 2 year, it has seen track in that condition, it is completely hold up fine) Side skirt suffer minor rock chips, other than that, it is fine too. Rear bumper is like new, no scratch, no crack.

And I am posting picture for seat upon someone's request.

The other suspension parts is in the car, and I really cannot take any good picture. But as I said all the parts are in perfectly working condition at the moment. The car is ready to do Buttonwillow anytime.

The plan is have all the parts besides the BBK and rims take out this Saturday. I will keep everyone updated.

JustinBeiber

Lots of nice quality parts..sad to see such a nice car go..any pictures of the bride zeta installed in the car?

david_d_durant

Damn I wish I didnt just buy a mid pipe and headers otherwise I would have been able to take the body kit off of your hands! Im local too! Im in long beach. I may be able to pull some strings though any other scratches on the bumper other than the on on the left hand side?

Rotary__Rocket

I am surprise I don't have any installed picture. But basically, it is a authentic reguler zeta III, and it does have a FIA approved sticker on the side, come with graduation cushion and a silver backing.

I will take all necessary pictures later on tonight.

dlum125

iTrader: (7)

damn great price for the kit. glws!!

Rotary__Rocket

pm replied, I am surprised there are so many people asking. I will take detail pictures of all the parts on Saturday.

Wind Dance

iTrader: (7)

What's next?

LifeAfterRx8

iTrader: (17)

Wish it was a CWP. Would've been all over this.

Rotary__Rocket

Pm replied.

I am not getting any car. The reason I am selling is I will be leaving the country early next year. I just do not want to part out 2 cars in the same time....

I will just keep on driving my double duty track/daily drive

2001 Supercharged NB2 Miata

Moby

iTrader: (6)

How many miles are on the ignition?

Rotary__Rocket

I will say around 10,000-15,000 miles. It is one of the earliest ignition kit from BHR, but I barely have 8,000 miles in last 2 years....

However, I will say it run as good as the first day I got it.

alexisonfire

iTrader: (1)

if the coilovers are still up, how much do you want for them?

c0ldf1ame

iTrader: (5)

interested in the rear bumper, mine is not perfect though, let me know what you wanna do

Rotary__Rocket

I am going to take detail pictures of all the parts I am selling on Saturday. Can you take a few picture of the rear bumper, so if we can work on something?

c0ldf1ame

iTrader: (5)

will do, i'll send you a PM when i get pix

YUL PHL

iTrader: (1)

you willing to sell me just the rear strut bar>?

RX8Soldier

iTrader: (24)

may be interested in the sides. Posting for future reference

AZ R3

Is the Arai helmet fs?

Tomago

iTrader: (4)

If willing to separate, how much for just the rear endlinks and sway bar?

Federighi

iTrader: (7)

PM sent.

Bl1nD_RX

WANT BUMPER SOOOO BAD! i wish mine wasnt fucked up...

Rotary__Rocket

All pm replied, more pictures and detail updated on the 2nd post.

wrightcomputing

iTrader: (5)

Are the sway bars adjustable? I am interested in them and the BHR kit but need to wait about a month or so for more funds. I'll check back and see if you still have the parts available.

AZ R3

I was all, here, take some money

OP was all, *ingore*

FYI, in case no one else is getting responses