Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

RX-8 Needed for cat-back system

Thread Tools
 
Rate Thread
 
Old Aug 29, 2003 | 11:15 AM
  #1  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
RX-8 Needed for cat-back system

Hey guys, I need a Rx-8 owner from the east cost. We want to make a Tru-dual exhaust system for the rx-8 similar to the pic down below, ( this is one we did for an 350z) But since my car is 20B i can't use it. If anyone is intrested in a Exhaust let us know, If you let us put it on your car you will get the exhaust at cost. And also you will be there all the time, in the installation and in the dyno, WHENEVER YOU SAY STOP , we will. You dont have to keep if you dont want. If any one is intrested please give us a call at 973-365-1190 or email me at marcos@acostamotorsports.com thank you
Reply
Old Aug 29, 2003 | 11:24 AM
  #2  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
this is the 350z we did, and we want to do the same with the 350z
Reply
Old Aug 29, 2003 | 11:31 AM
  #3  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
here is another pic of the 350z exhaust we did, it's all stainless steal
Reply
Old Aug 29, 2003 | 11:49 AM
  #4  
wakeech's Avatar
mostly harmless
 
Joined: Jun 2002
Posts: 3,440
Likes: 0
From: Greater Vancouver Area, BC
Re: RX-8 Needed for cat-back system

Originally posted by ACOSTARACING
We want to make a Tru-dual exhaust system for the rx-8 similar to the pic down below
how do you mean a "Tru-dual"?? you mean two separate pipes from the collector-back, with two canister type mufflers?? do you mean a complete exhaust with a special header with dual collectors, and split all the way back??
Reply
Old Aug 29, 2003 | 11:54 AM
  #5  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
Sorry i should have explain my self better, the exhaust system will connect to the header, then split up to two separate canister. The exhaust system will have 1 high flow cat, 1 sound resonator, and two canister, and you choose the canister, from HKS carbon fiber, to Magnaflow.
Reply
Old Aug 29, 2003 | 01:44 PM
  #6  
Red Devil's Avatar
Registered User
 
Joined: Jun 2002
Posts: 3,086
Likes: 1
From: Misinformation Director - Evolv Chicago
Just for curiosity, how much extra rwhp did you pull out of your 350Z's exhaust system?
Reply
Old Aug 29, 2003 | 01:46 PM
  #7  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
Well the 350z is a different animal but we made 12 extra h/p
Reply
Old Aug 29, 2003 | 06:16 PM
  #8  
r0tor's Avatar
Registered
iTrader: (1)
 
Joined: May 2003
Posts: 3,754
Likes: 1
From: PA
how long would it take to do this?
how much approx?
can it not sound like a frikkin ricer fart pipe?

are you in North or South Jersey?
Reply
Old Aug 29, 2003 | 06:29 PM
  #9  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
we are in north jersey, and it will take a day to do
Reply
Old Aug 29, 2003 | 06:49 PM
  #10  
r0tor's Avatar
Registered
iTrader: (1)
 
Joined: May 2003
Posts: 3,754
Likes: 1
From: PA
I'll think about it....

... I was planning on getting a cat-back, but was planning on doing it after like a year or two. Also, I only have 450 miles on my car right now so I'm not really enthusiatic about doing dyno runs with this low of milage.
Reply
Old Aug 29, 2003 | 06:55 PM
  #11  
mikeb's Avatar
100% Italian
 
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
what is there to think about
Reply
Old Aug 29, 2003 | 07:38 PM
  #12  
Napboy's Avatar
Sho'Nuff
 
Joined: Jul 2003
Posts: 632
Likes: 1
From: San Diego
if mike could drive to jersey from california, he would. but since he's not available, can someone else volunteer?
Reply
Old Aug 29, 2003 | 11:32 PM
  #13  
Boccelli's Avatar
Registered User
 
Joined: Aug 2003
Posts: 29
Likes: 0
From: Maryland
I'll do it. I pick up my rx8 next week (they are getting 2 8's in because of the sales they are making), then we can make plans for me to come up and we can do it.

All I need is an estimated cost this will take and so on. I'll call you guys sunday night so we can map this out.
Reply
Old Aug 30, 2003 | 08:08 AM
  #14  
ACOSTARACING's Avatar
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 184
Likes: 0
From: Elmwood Park NJ
OK, perfect, PM me or call me so i can give you the cost price. this will be my cost, so please keep it between us only
Reply
Old Aug 30, 2003 | 11:54 AM
  #15  
mystrx8's Avatar
Registered User
 
Joined: Aug 2003
Posts: 24
Likes: 0
From: Memphis, TN
Unhappy

Darn! Why does all of the good stuff happen so far away from me?
Reply
Old Aug 30, 2003 | 09:38 PM
  #16  
Boccelli's Avatar
Registered User
 
Joined: Aug 2003
Posts: 29
Likes: 0
From: Maryland
Originally posted by ACOSTARACING
OK, perfect, PM me or call me so i can give you the cost price. this will be my cost, so please keep it between us only
Pm'ed you, my lips are sealed, as are my fingers
Reply
Old Dec 31, 2003 | 11:33 AM
  #17  
Omicron's Avatar
Registered
 
Joined: Oct 2001
Posts: 7,966
Likes: 4
From: Boulder County, Colorado
So Acosta, did anything ever come of this "true" dual exhaust project? Inquiring minds want to know...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bbostic5
New Member Forum
28
Feb 24, 2019 05:32 PM
jay_tibo
Series I Aftermarket Performance Modifications
22
Sep 13, 2016 08:10 PM
akagc
RX-8's For Sale/Wanted
7
Aug 11, 2015 07:07 PM
SIllver
New Member Forum
0
Aug 1, 2015 07:34 PM
CMRine04
Series I Interior, Audio, and Electronics
0
Jul 27, 2015 09:46 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 10:52 AM.