that looks so good!
|
Anyone know where i can get this in Socal (San Gabriel Valley) and get it installed?
|
Has anyone found it any cheaper than $200? Thats the best price I've found online which is this:
http://www.carid.com/2010-mazda-rx-8...lex-79429.html |
Originally Posted by 1talysf1nest
(Post 3956231)
Has anyone found it any cheaper than $200? Thats the best price I've found online which is this:
http://www.carid.com/2010-mazda-rx-8...lex-79429.html |
Originally Posted by steve2tails
(Post 3956659)
Unless it was carbon fiber are you really complaining on the price on a knock off Mazdaspeed wing.
|
Originally Posted by Mysticalsnake
(Post 3712351)
i didn't have any problems further than what other guys normally have with aftermarket decklids (i.e. having to take off the rubber gasket for the trunk). The hardest part was getting the 3rd brake light to fit perfectly. It mostly just took a bit of fanagling but came out just fine. I also took the time to drill holes in the fiberglass bracing on the underside of the carbon fiber (being careful not to get into the CF itself) so that i could mount the factory carpet panel so that it made a nice clean installation with none of the wiring harness showing other than what shows on the stock deck lid.
How was the fitment? Ive never seen anyone with a 40AE with mazdaspeed parts so finding a used painted set is not going to happen, i was thinking if the fitment is pretty good then i could always get the cf and either add a cf trunk or paint over the cf. Where did you get your cf trunk? Does your spoiler mount up to the factory spoiler holes? I have a S1, so my holes MAY be different than yours. |
Originally Posted by EricB
(Post 4171602)
Some questions, im also planning on going cf wing,
How was the fitment? Ive never seen anyone with a 40AE with mazdaspeed parts so finding a used painted set is not going to happen, i was thinking if the fitment is pretty good then i could always get the cf and either add a cf trunk or paint over the cf. Where did you get your cf trunk? Does your spoiler mount up to the factory spoiler holes? I have a S1, so my holes MAY be different than yours. |
Originally Posted by Mysticalsnake
(Post 4172532)
I didnt have a problem with the fitment on my spoiler, and it's been so long now that I don't really remember where I bought it from with. As far as lining up with stock spoiler holes, I don't know. I never took my factory spoiler off. I bought the cf trunk lid and spoiler at the same time and put them on together at the same time.
to give you an idea of the color... http://www.japanesesportcars.com/pho...+cosmo+_3_.jpg http://www.drivingsports.com/site/wp...8-40th%203.jpg |
it probably wouldn't really look out of place. Hell, from a distance most people would probably think it's just light playing with their eyes to tell whether or not is body color. IIRC there have been galaxy grey members on here (series I owners) that have used a carbon fiber spoiler/wing on their stock trunk lid.
|
Paint the lower lip the same color as your car and leave the wing CF.
|
Another cool option would be to add a touch of the body color to the clear and then spray the CF wing. As you walk towards the car you will start to see the CF pop through.
|
Originally Posted by pdxhak
(Post 4175006)
Another cool option would be to add a touch of the body color to the clear and then spray the CF wing. As you walk towards the car you will start to see the CF pop through.
|
mazdaspeed wing
1 Attachment(s)
on cherry shinka
|
mazdaspeed wing
1 Attachment(s)
on shinka
|
do you need to do anything else other than drilling holes to your cf trunk for the ms spoiler
|
i guess nobody knows how to install the ms wing on the trunk
|
Just installed mine.. Make sure you measure. Re measure and punch pilot holes. Then slowly increase drill bits it was ridiculously easy... And carbon Fiber looks great on SBM.
After the bolts line the underside with 3M double sided tape I'm making a DIY as we speak lol. |
All times are GMT -5. The time now is 10:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands